journal article·2021-10

Effect of waste tyre rubber size on physical, rheological and UV resistance of high-content rubber-modified bitumen

Muhammad Jamal, Gilberto Martinez-Arguelles, Filippo Giustozzi

Publisher page

Abstract

Abstract This study is focused on the effect of crumb rubber (CR) particle size on the physical, chemo-rheological, UV ageing resistance and storage stability of high-content rubberised bitumen. Two CR gradations, #30 (coarser) and #50 (finer), were selected for this study. The blends were prepared by mixing 22.5% CR (by weight of base bitumen) into 50/70 pen grade bitumen for 60 min at 177 ± 10 °C with a shear mixing speed of 700 rpm. Blends prepared with #30 CR were found to improve the elastic response and storage stability compared to #50 CR modified binder. The presence of a greater number of coarser CR particles – which mostly remained in the swollen-form at the end of the blending process – as compared to finer particles – which instead were depolymerized and released the absorbed oils back into the binder phase – proved to increase the flexibility of the binder and improve its rheological performance. This same factor also reduced the #50 modified binder’s UV resistance as the C–C, C–H bonds in the saturates portion of the bitumen have a lower bond energy than the energy produced by the impact of UV rays. Overall, crumb-rubber modified bitumen resists better to ageing produced by UV radiation compared to standard unmodified bitumen. Further reprocessing of waste vehicle tyres into smaller #50 mesh size is deemed not to produce substantial improvements in the final bituminous blend other than the reduced viscosity for the same CR content.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. M. Genever, “National market development strategy for used tyres 2017-2022 Final Strategy,” no. June, 2017.
2. I.B, Joohari, and F., Giustozzi, “Waste tyres crumb rubber as a sustainability enhancer for polymer-modified and hybrid polymer-modified bitumen.” Int. J. Pavement Eng., 1-15, 2021.10.1080/10298436.2021.1943745 ↗
3. Recycled tyre rubber modified bitumens for road asphalt mixtures: A literature review10.1016/j.conbuildmat.2013.09.007 ↗
4. Numerical investigation of rubber swelling in bitumen10.1016/j.conbuildmat.2019.04.144 ↗
5. M. Stroup-gardiner, D. Newcomb, and B. Tanquist, “Asphalt-Rubber Interactions,” in Transportation Research Record 1417, pp. 99–108.
6. A review of the fundamentals of polymer-modified asphalts: Asphalt/polymer interactions and principles of compatibility10.1016/j.cis.2015.07.010 ↗
7. Interaction theory of asphalt and rubber10.1007/s11595-010-0107-y ↗
8. Molecular interactions between rubber and asphalt10.1021/ie050905r ↗
9. Microscopic analysis of the interaction between crumb rubber and bitumen in asphalt mixtures using the dry process10.1016/j.conbuildmat.2013.07.041 ↗
10. Swelling and Degradation Characteristics of Crumb Rubber Modified Asphalt during Processing
11. Changes in rubber due to its interaction with bitumen when producing asphalt rubber10.1080/14680629.2010.9690317 ↗
12. Backcalculation of swollen crumb rubber modulus in asphalt rubber binder and its relation to performance10.3141/2505-13 ↗
13. Influence of crumb rubber gradation on asphalt-rubber properties
14. A review on the effect of crumb rubber addition to the rheology of crumb rubber modified bitumen10.1155/2013/415246 ↗
15. I. Menapace, W. Yiming, and E. Masad, “Effects of Environmental Factors on the Chemical Composition of Asphalt Binders,” Energy and Fuels, no. December, 2018.10.1021/acs.energyfuels.8b03273 ↗
16. The influence of moisture on the evolution of the microstructure of asphalt binders with aging
17. Tecnico accelerated ageing (TEAGE) – a new laboratory approach for bituminous mixture ageing simulation10.1080/10298436.2018.1508845 ↗
18. Evaluation of the durability of asphalt concrete modified with nanomaterials using the TEAGE aging method10.1016/j.conbuildmat.2019.04.121 ↗
19. Accelerated laboratory ageing of bituminous mixtures using the TEAGE method
20. Laboratory Evaluation of the Effects of Long-Term Aging on High-Content Polymer-Modified Asphalt Binder10.1061/(ASCE)MT.1943-5533.0003208 ↗
21. State of the art report on ageing test methods for bituminous pavement materials10.1080/1029843042000198568 ↗
22. Synthesis of asphalt binder aging and the state of the art of antiaging technologies10.3141/2633-17 ↗
23. A. K. Sahu, K. Sudhakar, and R. M. Sarviya, “U.V light effect on the mechanical behaviour of HDPE/Carbon black composites,” IOP Conf. Ser. Mater. Sci. Eng., vol. 788, no. 5, 2020.10.1088/1757-899X/788/1/012054 ↗
24. Effect of carbon black on UV stability of LLDPE films under artificial weathering conditions10.1016/S0141-3910(01)00252-X ↗
25. Low-content crumb rubber modified bitumen for improving australian local roads condition10.1016/j.jclepro.2020.122484 ↗
26. ATLAS, Weathering Testing Guidebook.
27. Chemo-rheological investigation on waste rubber-modified bitumen response to various blending factors
28. ASTM G154–16 standard practice for operating fluorescent ultraviolet (UV) lamp apparatus for exposure of nonmetallic materials
29. Effect of crumb rubber concentration on the physical and rheological properties of rubberised bitumen binders
30. Rheological characteristics of ground tire rubber-modified bitumens10.1016/S1385-8947(02)00023-2 ↗
31. Influence of processing conditions on the rheological behavior of crumb tire rubber-modified bitumen10.1002/app.25800 ↗
32. Influence of crumb rubber concentration on the rheological behavior of a crumb rubber modified bitumen10.1021/ef049699a ↗
33. H. Wang, P. Apostolidis, X. Liu, and A. Scarpas, “Modeling of rubber swelling in bituminous binders,” Adv. Mater. Pavement Perform. Predict. - Proc. Int. AM3P Conf. 2018, no. April, pp. 181–184, 2018.10.1201/9780429457791-45 ↗
34. Experimental Investigation of Rubber Swelling in Bitumen10.1177/0361198120906423 ↗
35. Effect of laboratory aging on chemistry and rheology of crumb rubber modified bitumen10.1617/s11527-020-1451-9 ↗
36. How to construct an asphalt binder master curve and assess the degree of blending between RAP and virgin binders10.1061/(ASCE)MT.1943-5533.0000726 ↗
37. FTIR analysis of UV aging on bitumen and its fractions10.1617/s11527-015-0583-9 ↗