journal article·2021-11

Effect of polymer modified bitumen emulsion production method on the durability of recycled asphalt mixture in the presence of deicing agents

Mehrdad Asadi Azadgoleh, Amir Modarres, Pooyan Ayar

Publisher page

Abstract

Abstract This study investigated the effects of polymer modified bitumen emulsion production methods on the microstructural properties of modified binders and the mechanical properties of cold recycled mixtures with a more emphasis on durability. Modified bitumen emulsions containing styrene butadiene rubber (SBR) produced using three methods, including soap pre-batching, post-blending and co-milling. Surface free energy (SFE) and atomic force microscopy (AFM) tests have been used to inquire into the fundamental and microstructure properties of samples. Indirect tensile strength and dynamic modulus tests were used to investigate the mechanical properties of cold recycled mixtures. Mechanical properties of mixtures were investigated in dry state, after saturation and placement in the freeze-thaw (F-T) cycles with and without deicing agents including calcium magnesium acetate (CMA) and calcium chloride (CaCl2). Accordingly, the soap pre-batching method had the most suitable performance in terms of dynamic modulus at high temperatures and superior durability under F-T cycles. The samples made by soap pre-batching method showed the lowest surface roughness, maximum adhesion and the highest cohesive energy and surface free energy based on the results of AFM and SFE tests, which were effective in improving the mixture performance. Overall, the post-blending and co-milling methods can be rated as the second and third ranks in terms of both mechanical and nano-mechanical properties, respectively. Finally, in comparison with CaCl2, CMA salt significantly reduced the destructive effects of F-T cycles on the mechanical properties of recycled mixture.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. Application of rejuvenators to improve the rheological and mechanical properties of asphalt binders and mixtures : A review10.1016/j.jclepro.2019.05.209 ↗
2. Study on the fatigue properties of bitumen emulsion-cement mastics using frequency sweep and linear amplitude sweep tests
3. A literature review on cold recycling technology of asphalt pavement10.1016/j.conbuildmat.2018.06.006 ↗
4. Material selections in asphalt pavement for wet-freeze climate zones : A review10.1016/j.conbuildmat.2018.11.276 ↗
5. Effects of additives on the mechanical performance in recycled mixtures with bitumen emulsion: An overview10.1016/j.conbuildmat.2018.05.174 ↗
6. Polymer modification of bitumen: Advances and challenges10.1016/j.eurpolymj.2014.02.005 ↗
7. Polymer modified asphalt binders10.1016/j.conbuildmat.2005.07.007 ↗
8. Cold mix asphalt: An overview10.1016/j.jclepro.2020.124378 ↗
9. Comparative evaluation of moisture susceptibility of modified/foamed asphalt binders combined with different types of aggregates using surface free energy approach10.1016/j.conbuildmat.2020.119429 ↗
10. Lesueur · 2011 · 25
11. Characterization of kaolinite/emulsion-polymerization styrene butadiene rubber (ESBR) nanocomposite prepared by latex blending method: Dynamic mechanic properties and mechanism10.1016/j.polymertesting.2020.106600 ↗
12. Mechanical properties and durability of rubberized and SBR latex modified rubberized concrete10.1016/j.conbuildmat.2020.118584 ↗
13. D.R. Salomon. Asphalt Emulsion Technology. Transportation Research Board, E-C102. August, 2006, Washington DC, USA.
14. Effect of emulsifying agent on rheological properties of bitumen emulsion modified with different techniques of adding SBR latex polymer
15. Modifying asphalt emulsion with different types of polymers for surface treatment applications10.1080/10916466.2017.1344709 ↗
16. “Modification of emulsified bitumen using Styrene-Butadiene Rubber Modification of emulsified bitumen using Styrene-Butadiene Rubber (SBR)10.1088/1757-899X/527/1/012050 ↗
17. The rheological properties of a bitumen emulsion modified with two types of SBR latex10.1080/10916466.2016.1214600 ↗
18. H. Abedini, S. Naimi, M. Abedini. Rheological properties of bitumen emulsion modified with NBR latex. Pet. Sci. Technol., 2017, 35(15): 1576–1582.10.1080/10916466.2017.1319386 ↗
19. Carpani, C., Bocci, E., Bocci, M. Rheological and performance characterisation of the bitumen recovered from different emulsions for cold mixtures. Road Materials and Pavement Design. doi.org/10.1080/14680629.2021.1906735.
20. Applying Method of Moments to Model the Reliability of Deteriorating Performance to Asphalt Pavement under Freeze-Thaw Cycles in Cold Regions10.1061/(ASCE)MT.1943-5533.0001027 ↗
21. Impact of freeze – thaw cycles on low temperature mixed mode I/II cracking properties of water saturated hot mix asphalt : An experimental study10.1016/j.conbuildmat.2020.119939 ↗
22. A review on moisture damages of hot and warm mix asphalt and related investigations10.1016/j.jclepro.2015.03.028 ↗
23. EFFECTS OF SALT FREEZE DAMAGE ON10.13168/cs.2017.0024 ↗
24. Evaluation of road performance and adhesive characteristic of asphalt binder in salt erosion environment10.1016/j.mtcomm.2020.101593 ↗
25. Effect of deicing solutions on the tensile strength of micro- or nano-modified asphalt mixture10.1016/j.conbuildmat.2010.06.038 ↗
26. ScienceDirect A review on the best practices in concrete pavement design and materials in wet-freeze climates similar to Michigan
27. Predictive model of modified asphalt mixtures with nano hydrated lime to increase resistance to moisture and fatigue damages by the use of deicing agents10.1016/j.conbuildmat.2020.120353 ↗
28. On the nature of calcium magnesium acetate road deicer10.1016/j.jssc.2018.10.041 ↗
29. Asphalt Institute. Asphalt cold mix recycling: MS-21. 3rd edition. Lexington, KY: Asphalt Institute.
30. A FESEM/EDX investigation into how continuous deicer exposure affects the chemistry of Portland cement concrete10.1016/j.conbuildmat.2010.06.086 ↗
31. Durability properties of non-air entrained roller compacted concrete pavement containing coal waste ash in presence of deicing salts10.1016/j.coldregions.2017.02.006 ↗
32. Coal Waste Application in Recycled Asphalt Mixtures with Bitumen Emulsion10.1016/j.jclepro.2014.07.082 ↗
33. Performance evaluation of asphalt mixtures containing high-RAP binder content and bio-oil rejuvenator10.1016/j.conbuildmat.2019.07.191 ↗
34. Effects of deicing agents on moisture susceptibility of the WMA containing recycled crumb rubber10.1016/j.conbuildmat.2019.07.307 ↗
35. Long term performance of warm mix asphalt versus hot mix asphalt10.1007/s11771-013-1483-1 ↗
36. Laboratory investigation of moisture susceptibility of warm-mix asphalt mixtures containing steel slag aggregates10.1080/10298436.2014.953502 ↗
37. Evaluation of the effect of moisture on behavior of warm mix asphalt (WMA) mixtures containing recycled asphalt pavement (RAP)10.1016/j.conbuildmat.2020.118526 ↗
38. Laboratory investigation of portland cement concrete containing recycled asphalt pavements10.1016/j.cemconres.2005.05.002 ↗
39. Investigating the toughness and fatigue behavior of conventional and SBS modified asphalt mixes10.1016/j.conbuildmat.2013.05.044 ↗
40. Construction of triaxial dynamic modulus master curve for asphalt mixtures10.1016/j.conbuildmat.2012.06.067 ↗
41. Performance evaluation of temperature effect on hot in-place recycling asphalt mixtures10.1016/j.jclepro.2020.124093 ↗
42. Prediction of phase angles from dynamic modulus data and implications on cracking performance evaluation
43. Dynamic and rutting characteristics of recycled asphalt mixtures containing natural sand and anti-stripping agents10.1016/j.jclepro.2020.124365 ↗
44. Time Temperature Superposition Principle Validation for Bituminous Mixes in the Linear and Nonlinear Domains10.1061/(ASCE)MT.1943-5533.0000658 ↗
45. Using dynamic modulus test to evaluate moisture susceptibility of asphalt mixtures10.3141/2127-04 ↗
46. Using bond strength and surface energy to estimate moisture resistance of asphalt-aggregate systems10.1016/j.conbuildmat.2016.10.043 ↗
47. Using surface free energy to evaluate the fracture performance of asphalt binders10.1016/j.conbuildmat.2020.118004 ↗
48. Determining the water damage resistance of nano-clay modified bitumens using the indirect tensile strength and surface free energy methods10.1016/j.conbuildmat.2018.02.011 ↗
49. The effects of Gilsonite and Sasobit on the mechanical properties and durability of asphalt mixtures10.1016/j.conbuildmat.2019.117676 ↗
50. Moisture Susceptibility of Asphalt Mixtures: Thermodynamic Evaluation of the Effects of Antistripping Additives10.1061/(ASCE)MT.1943-5533.0003561 ↗
51. Determination of the stripping process of asphalt mixtures and the effective mix design and SFE parameters on its different phases10.1016/j.conbuildmat.2019.04.043 ↗
52. Effects of Aging and Rejuvenation on Surface-Free Energy Measurements and Adhesion of Asphalt Mixtures10.1061/(ASCE)MT.1943-5533.0002780 ↗
53. Adhesive surface characteristics of bitumen binders investigated by Atomic Force Microscopy10.1016/j.fuel.2013.05.042 ↗
54. Microstructural characteristics of differently aged asphalt samples based on atomic force microscopy (AFM)10.1016/j.conbuildmat.2020.119388 ↗
55. Moisture susceptibility evaluation of asphalt mixtures containing Evonik, Zycotherm and hydrated lime10.1016/j.conbuildmat.2017.12.113 ↗
56. Evaluation of moisture susceptibility of foamed warm asphalt produced by water injection using surface free energy method10.1016/j.conbuildmat.2016.11.072 ↗
57. Investigation of microscale aging behavior of asphalt binders using atomic force microscopy10.1016/j.conbuildmat.2016.12.180 ↗
58. Multi scale investigation on the failure mechanism of adhesion between asphalt and aggregate caused by aging10.1016/j.conbuildmat.2020.120361 ↗
59. Using Atomic Force Microscopy to Evaluate the Nanostructure and Nanomechanics of Warm Mix Asphalt10.1061/(ASCE)MT.1943-5533.0001254 ↗
60. Nanomechanistic properties of reclaimed asphalt pavement modified asphalt binders using an atomic force microscope10.1080/10298436.2017.1293268 ↗
61. The influence of nano-carbon from coconut shell ash as modifier on the properties of bitumen