Numerical analysis of train-track-subgrade dynamic performance with crumb rubber in ballast layer
Source abstract
Abstract
Crumb rubber (CR) has been proposed to apply in the ballast or sub-ballast layer for ballast degradation mitigation and vibration (noise) reduction. The CR can change the ballast layer stiffness, which can affect the train-track-subgrade dynamic performance and cause travel comfort and safety issues. Towards this, this study aims at confirming 1) how much the CR application can affect the dynamic performance of train and ballast layer; 2) to what extent the CR-ballast layer can distribute the train loadings to reduce subgrade surface stress. To achieve this aim, a whole train-track-subgrade system model was built by coupling multibody dynamics (MD), discrete element method (DEM) and finite difference method (FDM). The MD was used to build the train, including one vehicle body, two bogies and four wheelsets. The DEM was used to build the ballasted track, including rail, sleepers and ballast layer. The FDM was used to build the subgrade. Using the coupled model, the dynamic performance of train and track were studied, including the vehicle body acceleration, wheel-rail force, rail dynamical bending moment, sleeper acceleration, sleeper displacement and ballast acceleration. In addition, the energy dissipation of the ballast bed was also presented. For the subgrade, the subgrade surface acceleration and surface stress were measured and analysed. In the model, different CR size and percentage were considered. Results show that using the CR in ballast layer can increase the accelerations of sleeper, rail and train. But it can decrease the ballast degradation, subgrade surface acceleration and subgrade surface stress. CR helps consume train loading energy, reducing the energy that has to be consumed by ballast friction. Small size CR (8–22.4 mm) has greater influence on dynamic performance of the whole train-track-subgrade system than big size CR (9.5–63 mm). In summary, 10% percentage of CR-ballast mixture is recommended, and for CR size it is difficult to give a recommendation. Small size CR increase ballast acceleration more than big size CR, but small size CR are better at improving sleeper displacement, subgrade stress and ballast bed stress.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Railway Engineering and Dynamics · Geotechnical Engineering and Underground Structures · Structural Engineering and Vibration Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Indraratna · 2011
2. Comparison of the effects and efficiency of vertical and side tamping methods for ballasted railway tracks10.1016/j.conbuildmat.2021.125708 ↗
3. Image analysis for morphology, rheology and degradation study of railway ballast: A review10.1016/j.trgeo.2018.12.001 ↗
4. B. Standard, BS EN 13450 (2002), Aggregates for railway ballast.
5. T.P.M.o. Railways, Railway Ballast, TB/T2140-2008, China Railway Publishing House, Beijing, 2008.
6. Association · 1995
7. DEM analysis of railtrack ballast degradation under monotonic and cyclic loading10.1016/j.proeng.2016.06.137 ↗
8. Experimental and discrete element modeling of geocell-stabilized subballast subjected to cyclic loading10.1061/(ASCE)GT.1943-5606.0001431 ↗
9. Hydraulic conductivity of fresh railway ballast mixed with crumb rubber considering size and percentage of crumb rubber as well as aggregate gradation10.1016/j.conbuildmat.2020.118133 ↗
10. Evaluation of lateral stability of railway tracks due to ballast degradation10.1016/j.conbuildmat.2021.122342 ↗
11. An elasto-plastic method for analysing the deformation of the railway ballast10.1016/j.proeng.2016.06.082 ↗
12. Laboratory assessment of the role of particle size distribution on the deformation and degradation of ballast under cyclic loading10.1061/(ASCE)GT.1943-5606.0001463 ↗
13. Müller · 2008 · 04
14. Discrete element modelling of cyclic loads of geogrid-reinforced ballast under confined and unconfined conditions10.1016/j.geotexmem.2012.07.004 ↗
15. Polyurethane reinforced ballasted track: Review, innovation and challenge10.1016/j.conbuildmat.2019.03.031 ↗
16. Effects of under sleeper pads on dynamic responses of railway prestressed concrete sleepers subjected to high intensity impact loads10.1016/j.engstruct.2020.110604 ↗
17. Viability of using end-of-life tire pads as under sleeper pads in railway10.1016/j.conbuildmat.2014.04.013 ↗
18. Influence of tire-derived aggregates on the properties of railway ballast material10.1061/(ASCE)MT.1943-5533.0001702 ↗
19. Vibration attenuation of tire shreds
20. Characterisation of an unbound granular mixture with waste tyre rubber for subballast layers10.1617/s11527-014-0443-z ↗
21. Analysis of the vibration alleviation of a new railway sub-ballast layer with waste tyre rubber10.1617/s11527-016-0951-0 ↗
22. Real scale evaluation of vibration mitigation of sub-ballast layers with added tyre-derived aggregate10.1016/j.conbuildmat.2018.03.027 ↗
23. Effect of rubber crumbs on the cyclic behavior of steel furnace slag and coal wash mixtures10.1061/(ASCE)GT.1943-5606.0001827 ↗
24. A study into the use of crumb rubber in railway ballast10.1016/j.conbuildmat.2014.10.045 ↗
25. Direct shear properties of railway ballast mixed with tire derived aggregates: Experimental and numerical investigations10.1016/j.conbuildmat.2018.11.284 ↗
26. Influence of tire-derived aggregates mixed with ballast on ground-borne vibrations, Journal of Modern
27. Tire-derived aggregate layer performance in railway bridges as a novel impact absorber: Numerical and field study10.1002/stc.2444 ↗
28. Experimental and numerical investigation of the dynamic behavior of ballasted track containing ballast mixed with TDA10.1177/0954409716664937 ↗
29. Zhai · 2020
30. Fundamentals of vehicle–track coupled dynamics10.1080/00423110802621561 ↗
31. Modelling and experiment of railway ballast vibrations10.1016/S0022-460X(03)00186-X ↗
32. W. Zhai, X.J.v.s.d. Sun, A detailed model for investigating vertical interaction between railway vehicle and track, 23(sup1) (1994) 603-615.10.1080/00423119308969544 ↗
33. Two simple fast integration methods for large-scale dynamic problems in engineering10.1002/(SICI)1097-0207(19961230)39:24<4199::AID-NME39>3.0.CO;2-Y ↗
34. Shi · 2020
35. Coupled discrete-continuum approach for railway ballast track and subgrade macro-meso analysis
36. A discrete numerical model for granular assemblies10.1680/geot.1979.29.1.47 ↗
37. G.R. McDowell, W.L. Lim, A.C. Collop, R. Armitage, N.H. Thom, Laboratory simulation of train loading and tamping on ballast, in: Proceedings of the Institution of Civil Engineers-Transport, Thomas Telford Ltd, 2005, pp. 89-95.10.1680/tran.2005.158.2.89 ↗
38. Discrete element modelling of ballasted track deformation behaviour10.1080/23248378.2013.788361 ↗
39. Performance improvement of rail track substructure using artificial inclusions – Experimental and numerical studies10.1016/j.trgeo.2016.04.001 ↗
40. Parameters of a discrete element ballasted bed model based on a response surface method10.1631/jzus.A1900133 ↗
41. Discrete element simulation of railway ballast: modelling cell pressure effects in triaxial tests10.1007/s10035-016-0660-y ↗
42. Calibration for discrete element modelling of railway ballast: A review10.1016/j.trgeo.2020.100341 ↗
43. Discrete element modelling of cyclic loading of crushable aggreates10.1007/s10035-003-0143-9 ↗
44. Discrete element method analysis of railtrack ballast degradation during cyclic loading10.1007/s10035-006-0006-2 ↗
45. DEM analysis of angular ballast breakage under cyclic loading10.1080/17486020701474962 ↗
46. Modelling ballast behaviour under dynamic loading. Part 1: A 2D polygonal discrete element method approach10.1016/j.cma.2005.07.006 ↗
47. Discrete element modelling of scaled railway ballast under triaxial conditions10.1007/s10035-016-0663-8 ↗
48. B.s.p.B.E British Standards Institution · 2013
49. Simulation ballasted track behavior: numerical treatment and field application10.1061/(ASCE)GM.1943-5622.0000831 ↗
50. FLAC/PFC coupled numerical simulation of AE in large-scale underground excavations10.1016/j.ijrmms.2006.09.013 ↗
51. Research on the dynamic behaviour of the railway ballast assembly subject to the low loading condition based on a tridimensional DEM-FDM coupled approach10.1016/j.conbuildmat.2019.05.102 ↗
52. Y. Guo, Application of new materials and elements to railway ballasted track for performance improvement, (2021).
53. Dynamic behavior analysis of high-speed railway ballast under moving vehicle loads using discrete element method10.1061/(ASCE)GM.1943-5622.0000871 ↗
54. C. Itasca, PFC (particle flow code in 2 and 3 dimensions), version 5.0 [User’s manual], Minneapolis, 2014.