journal article·2016-01

Time-depending performance of resilient layers under floating floors

M. Caniato, F. Bettarello, L. Marsich, A. Ferluga, O. Sbaizero, C. Schmid

Publisher page

Abstract

In the floating floor system the performance of resilient layers, in terms of impact sound pressure level reduction, is of paramount importance. In the present study in order to evaluate the time-depending performances, a comprehensive characterization of twenty different layers was carried out, evaluating dynamic stiffness, compressibility and compressive creep. The aim of this work was to find out a possible correlation among these parameters and the effect of service time on mechanical and acoustical properties. Results indicated that a general rule couldn’t be defined. Furthermore, the presence of a coating, as well as different density and/or contact shape, has proved to influence the final acoustical performances.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Acoustic Wave Phenomena Research · Material Properties and Processing · Structural Engineering and Vibration Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Improvement of floor impact sound on modular housing for sustainable building10.1016/j.rser.2013.08.054 ↗
2. Impact noise isolation of composite floors10.1121/1.1912726 ↗
3. Predicting the sound reduction of building elements from material data10.1260/1351010991501428 ↗
4. Impact sound pressure level performances of basic beam floor structures10.1260/1351-010X.17.4.305 ↗
5. Can beam-block floors be considered homogeneous panels regarding impact sound insulation?10.1260/1351010011501920 ↗
6. Dynamic stiffness of materials used for reduction in impact noise: comparison between different measurement techniques
7. Effect and importance of static-load on airflow resistivity determination and its consequences on dynamic stiffness10.1016/j.apacoust.2011.03.009 ↗
8. Cremer · 2005
9. M. Caniato, J. Kaspar, R. Di Monte, O. Sbaizero. Common layers and nano-structured layers: comparison between resilient materials used under floating floors, Proc. EuroRegio, Ljubljana: 2010.
10. The relationship between post-construction testing and sound insulation performance10.1016/S0003-682X(98)00044-9 ↗
11. B. Rasmussen, D. Hoffmeyer. Sound insulation performance in Danish multi-storey housing 1850–2009 and upgrade possibilities to meet current regulations. Proc. InterNoise 2013.
12. A comparison of the predicted dynamic stiffness of resilient layers with calculated values obtained from the measured acceleration response10.1260/1351010001501679 ↗
13. Findley · 1948
14. W. Findley. Creep characteristic of plastic. Symp. Plast., ASTM; 1944.
15. Acoustical performance characterization of resilient materials used under floating floors in dwellings
16. Change of dynamic stiffness of open and closed cell resilient materials after compressibility test
17. Long-term prediction of compressive creep development in expanded polystyrene10.1016/j.polymertesting.2008.01.005 ↗
18. Measurement of creep-induced change of dynamic stiffness of resilient materials used for impact sound isolation in floating floors10.1520/JTE103932 ↗
19. UNI EN 29052-1:1993 Acoustics- Determination of dynamic stiffness. Materials used under floating floors in dwellings.
20. ISO 9053:1991 Acoustics – Materials for acoustical applications – Determination of airflow resistance.
21. ISO 7626–5:1994 Vibration and shock – Experimental determination of mechanical mobility - Part 5: Measurements using impact excitation with an exciter which is not attached to the structure.
22. UNI EN 12431:2013 Thermal insulating products for building applications – Determination of thickness for floating floor insulating products.
23. UNI EN 1606:2013 Thermal insulating products for building applications. Determination of compressive creep.
24. ISO 10140-3:2010. Acoustics – Laboratory measurement of sound insulation of building elements – Part 3: Measurement of impact sound insulation.