journal article·2011-05

Evaluating and comparing different methods and models for generating relaxation modulus master-curves for asphalt mixes

Lubinda F. Walubita, Allex E. Alvarez, Geoffrey S. Simate

Publisher page

Abstract

Abstract Based on a master-curve, mixture properties can be predicted or interpolated at different temperatures and loading times of interest from a limited set of laboratory test data. This paper presents a comparative assessment of three methods used for generating the relaxation modulus ( E ( t )) master-curves of hot-mix asphalt (HMA). These methods were the Arrhenius, the Williams–Landel–Ferry (WLF), and an optimization technique with the sum of square error (SSE) method. Experimental data ( E ( t ) values) for different HMA mixtures were gathered by performing uniaxial loading (strain-controlled) relaxation modulus tests (RMT). The process for evaluating the three methods was based on using the same RMT laboratory data to generate E ( t ) master-curves and then comparing the best fit functions. Corresponding results suggested that the SSE method generated the best fit functions relative to the measured E ( t ) data. Unlike the Arrhenius and WLF models, the SSE is independent of external empirical material constants in its application and is universally applicable to any given material or HMA mix type. However, this study also demonstrated that both the Arrhenius and WLF methods can produce satisfactory (and in fact equivalent results) if appropriate constants, that are material or mix type specific, are used. Conclusively, the findings of this paper suggested that satisfactory application of the Arrhenius and WLF methods should be with caution, in particular with respect to the material constants. Otherwise, the SSE method proved to be more accurate and would be preferred.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Material Properties and Failure Mechanisms

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. Roque R, Birgisson B, Kim B, Cui Z. Use of binder rheology to predict the cracking performance of SBS modified mixtures. Guidelines for use of modifiers in Superpave mixtures. vol. 2. Florida Department of Transportation, Florida; 2004.
2. Medani TO, Huurman M, Molenaar AAA. On the computation of master curves for bituminous mixes. In: 3rd EuroBitumen Congress, Vienna, Austria; 2004.
3. Chehab GR, Kim YR, Schapery RA, Witczak MW, Bonaquist R. Time–temperature superposition for asphalt concrete mixtures with growing damage in tension state. In: Annual meeting of the asphalt paving technology. Colorado, USA: AAPT, Colorado Springs; 2002.
4. Francken L, Clauwaert C. Characterization and structural assessment of bound materials for flexible road structures. In: 6th international conference on the structural design of asphalt pavements. Ann Arbor: University of Michigan; 1988. p. 130–44
5. Lytton R, Uzan J, Fernando EG, Roque R, Hiltmen D, Stoffels S. Development and validation of performance prediction models and specifications for asphalt binders and paving mixtures. Report No. SHRP-A-357, Washington, DC; 1993.
6. Jacobs · 1995
7. Temperature dependence of relaxation mechanisms in amorphous polymers and other glass-forming liquids
8. Walubita LF, Epps Martin A, Jung HS, Glover CJ, Park ES. Application of calibrated mechanistic fatigue analysis with aging effects. Report FHWA/TX-05/0-4468-3. College Station, TX: Texas Transportation Institute-Texas A&M University; 2006.
9. Shames IH, Dym CL. Energy and finite element methods in structural mechanics; 1985.
10. Walubita LF. Comparison of fatigue analysis approaches for predicting fatigue lives of hot-mix asphalt concrete (HMAC) mixtures. College Station, TX. PhD dissertation, Texas A&M University; 2006.
11. TxDOT. TxDOT – online manuals. TxDOT; 2007.