Laboratory evaluation of flexible pavement materials containing waste polyethylene (WPE) film
Source abstract
Abstract
Abstract This paper presents a research to recycle the waste vinyl (waste polyethylene film: WPE film) in asphalt mixtures for improving the performance properties of the mixtures. Conventional Marshall mix designs were carried out with varying WPE contents, and the best performing content of WPE film was determined from the previous study. Also, asphalt mixtures with two commercial polymer modifiers, low-density polyethylene (LDPE) and a styrene–butadiene–styrene (SBS), were used to compare the effectiveness of WPE-modified mixture. The strength characteristics such as Marshall stability and indirect tensile strength (ITS) were evaluated, and the wheel tracking test, result of which is generally considered to reflect the field performance, was conducted to measure the rutting resistance of the asphalt mixtures. From the results of this study, asphalt mixture with waste vinyl showed much better rutting resistance than normal asphalt mixture without WPE. It is hypothesized if an optimum content of waste vinyl is used, it is expected that the waste vinyl will be effective as much as commercial modifier in improving the performance of asphalt pavements.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. The effect of waste tire thread mesh on the dynamic behavior of asphalt mixtures10.1016/j.conbuildmat.2009.11.011 ↗
2. ENVICO; 2010. .
3. Laboratory evaluation of incorporating waste ceramic materials into Portland cement and asphaltic concrete10.1016/j.conbuildmat.2009.08.024 ↗
4. Evaluation of tensile properties of polymer-modified asphalt concrete
5. Experimental study for determination of optimum waste vinyl contents in asphalt concrete
6. Kim KW, Li XF, Ko DH, Jeong SH. Evaluation of waste polyethylene asphalt concrete. In: Proceedings of 3rd Asia symposium on polymers in concrete, Tongji University, Shanghai, China; 2000. p. 157–63.
7. Deformation control by aggregate contact increment in asphalt concrete mixture
8. Kim KW, Oh SK, Doh YS, Lee SH. Fundamental characteristics of polymer-modified color flexible pavement concrete. In: Proceedings of 3rd Asia symposium on polymers in concrete, Tongji University, Shanghai, China; 2000. p. 151–56.
9. Lee S-J, Amirkhanian S, Kim KW. Performance characteristics of asphalt mixtures with waste vinyl. In: 21st international conference on solid waste technology and management, Compendium of papers CD-ROM, Philadelphia, PA; 2006.
10. Liang Z. Utilization of recycled polyethylene in the preparation of stabilized high performance modified asphalt binders. In: Waller, Editor. Use of waste materials in hot-mix asphalt, ASTM STP 1193, ASTM, Philadelphia; 1993.10.1520/STP19851S ↗
11. Little Z. Enhancement of asphalt concrete mixtures to meet structural requirements through the addition of recycled polyethylene. In: Waller, editor. Use of waste materials in hot-mix asphalt, ASTM STP 1193, ASTM, Philadelphia; 1993.10.1520/STP19852S ↗
12. The mechanical properties of asphalt mixtures with recycled concrete aggregates10.1016/j.conbuildmat.2009.08.046 ↗
13. Use of asphalt roofing shingle in HMA10.1016/j.conbuildmat.2004.08.005 ↗
14. Utilization of municipal solid waste incineration ash in stone mastic asphalt mixture: Pavement performance and environmental impact10.1016/j.conbuildmat.2008.05.009 ↗