Analytical prediction of transfer length in prestressed self-consolidating concrete girders using pull-out test results
Source abstract
Abstract
Abstract While self-consolidating concrete (SCC) is comparable to conventional concrete (CC) in terms of strength, the comparability of SCC’s bond to steel is less well-defined. A keen understanding of SCC’s bond strength is essential to advance SCC within the prestressed concrete industry. This study presents an analytical method for predicting the transfer length of steel strands in prestressed girders using pull-out test results. The experimental data from a series of 56 pull-out tests is utilized to derive bond stress–slip relationships for 12.7 mm steel strands embedded in SCC and CC. Modification factors are used to correlate pullout bond stresses to transfer bond stresses in prestressed members, and the modified relationships are integrated in three-dimensional finite element models to predict transfer lengths in prestressed SCC girders. The analytical predictions correlate well with experimental results and transfer length requirements of current US design codes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Self-compacting concrete10.3151/jact.1.5 ↗
2. Andrawes B, Shin M, Pozolo, A. Transfer and development length of prestressing tendons in full-scale AASHTO prestressed concrete girders using self-consolidating concrete. Illinois center for transportation report FHWA-ICT-09-038, Illinois Department of Transportation, Springfield, IL; 2009.
3. Ruiz E. et al. Estimating transfer lengths of precast/prestressed beams cast with self-consolidating concrete. Paper no. 07-2276, transportation research board 86th annual meeting, Washington, DC; 2007.
4. Larson K, Peterman R, Esmaeily A. Evaluating the time-dependent deformations and bond characteristics of a self consolidating concrete mix and the implication for pretensioned bridge applications. Report no. FHWA-KS-01-1, Kansas Department of Transportation, Topeka, KS; 2007.
5. Hamilton H, Labonte T. Self-consolidating concrete (SCC) structural investigation. Report no. BD545 RPWO#21, Florida Department of Transportation, Gainesville, FL; 2005.
6. Trent J. Transfer length, development length, flexural strength, and prestress losses evaluation in pretensioned self-consolidating concrete members. M.S. Thesis, Virginia Polytechnic Institute and State University, Blacksburg, VA; 2007.
7. ACI 318-08. Building code requirements for structural concrete and commentary. American Concrete Institute, Farmington Hills, MI; 2008.
8. AASHTO LRFD Bridge Design Specifications. 3rd ed. American Association of State Highway and Transportation Officials, Washington, DC; 2004.
9. Naito C. et al. Comparative performance of high early strength and self consolidating concrete for use in precast bridge beam construction. ATLSS report no. 05-03, Advanced technology for large structural systems, Bethlehem, PA; 2005.
10. Acceptance criteria for bond quality of strand for pretensioned prestressed concrete applications10.15554/pcij.03011997.52.90 ↗
11. Zia P, Nunez R, Mata L. Implementation of self-consolidating concrete for prestressed concrete girders. FHWA/NC/2006-30 final report, North Carolina department of transportation, Raleigh, NC; 2005.
12. Girgis A, Tuan C. Bond Strength of self-consolidating concrete for prestressed concrete applications. Report no. SPR-PL-1 (037) P528 & EACNH67114, Nebraska Department of Roads, Omaha; NE; 2005.
13. Haq M. Effect of self consolidating concrete (SCC) mix proportioning on transfer and development length of prestressing strands. M.S. Thesis, Michigan State University, East Lansing, MI; 2005.
14. Self-consolidating concrete incorporating new viscosity modifying admixtures10.1016/j.cemconres.2003.10.024 ↗
15. Use of viscosity-modifying admixture to enhance stability of fluid concrete
16. Self-consolidating concrete for precast products (BDE). Bureau of materials and physical research, Illinois Department of Transportation, Springfield, IL; 2007.
17. Moustafa S. Pullout strength of strand and lifting loops. Technical bulletin 74-B5, Concrete Technology Associates, Tacoma, WA; 1974.
18. Interim guidelines for the use of self-consolidating concrete in precast/prestressed concrete member plants. Precast/Prestressed Concrete Institute, Chicago, IL; 2003.
19. Russell B. Rose D. Investigation of standardized tests to measure the bond performance of prestressing strand. Research report, fears structural engineering laboratory, University of Oklahoma, Norman, OK; July 1996.10.15554/pci.rr.mat-006 ↗
20. Test Methods for Self-consolidating concrete. Technical Bulletin TB-1506C, W. R. Grace & Co.-Conn., Cambridge, MA; 2006.
21. Development of bond strength of reinforcement steel in self-consolidating concrete
22. Top-bar effect of steel bars in self-consolidating concrete (SCC)
23. Bond characteristics of high-strength lightweight concrete
24. Development Length Criteria for Conventional and high relative rib area reinforcing bars
25. ANSYS structural analysis guide. Release 11.0, ANSYS, Inc., Canonsburg, PA; 2007.
26. Willam K, Warnke E. Constitutive model for the triaxial behaviour of concrete. Seminar on concrete structures subjected to triaxial stresses. In: International association of bridge and structural engineering conference, Bergamo, Italy; 1974.
27. Behavior of concrete columns reinforced with high strength steels
28. Bond stresses along plain steel reinforcing bars in pullout specimens
29. Bond stress distribution on reinforcing steel in beams and pullout specimens
30. Anderson G, Rider H, Sozen M. Bond characteristics of prestressing strands. structural research series 283, University of Illinois at Urbana-Champaign, Urbana, IL; 1964.
31. Stocker, M. and Sozen, M. Investigation of prestressed reinforced concrete for highway bridges, Part V: bond characteristics of prestressing strand. Engineering experiment station bulletin 503, University of Illinois at Urbana-Champaign, Urbana, IL; 1970.
32. Proposed test for determining bond characteristics of prestressing strands10.15554/pcij.01011992.66.73 ↗