Rheology of belite-cement – Effect of w/c and high-range water-reducer type
Source abstract
Abstract
Abstract The rheological properties of concrete determine its flow performance and thus they are of great importance in placement and consolidation. A full understanding of the behavior of fresh concrete can be achieved through a good understanding of the rheology of paste. Cement pastes exhibit complex rheological behavior affected by several physical and chemical factors, including water-to-cement ratio (w/c), type and dosage of high-range water-reducer (HRWR), and cement characteristics. An experimental investigation was carried out to investigate the rheological properties of belite cement (BC) mixtures made with various w/c ranging between 0.30 and 0.36 and two different types of HRWR. A polynaphthalene sulfonate (PNS) and a polycarboxylate-(PC) based HRWR were evaluated. Test results indicated that the use of BC in low w/c mixtures resulted in shear-thickening behavior when PC is employed and shear-thinning response for higher w/c. Compared to ordinary Portland cement (OC), the use of BC resulted in lower shear-thickening response, regardless of the w/c and HRWR type. The use of PC HRWR promoted the shear-thickening responses of mixtures for both types of cement. On the other hand, the use of PNS in combination with BC resulted in high yield stress values.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovations in Concrete and Construction Materials · Grouting, Rheology, and Soil Mechanics · Rheology and Fluid Dynamics Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. High belite cements—present status and future technological options: part I10.1016/0008-8846(96)00099-3 ↗
2. The effect of adsorption of superplasticizers on the surface of cement10.1016/0008-8846(87)90043-3 ↗
3. The effect of superplasticizer molecular weight on its adsorption on, and dispersion of cement10.1016/0008-8846(88)90035-X ↗
4. The rheological behavior of fresh cement paste10.1016/0008-8846(88)90067-1 ↗
5. Rheology of cementitious systems, rheology of cementitious systems10.1557/S0883769400043888 ↗
6. Effect of Welan gum high-range water reducer combination on rheology of cement grout
7. Chemical admixture–cement interactions: phenomenology and physico-chemical concepts10.1016/S0958-9465(97)00062-0 ↗
8. The rheology of Portland cement paste10.1088/0508-3443/6/5/304 ↗
9. On the viscometric examination of cement paste10.1016/0008-8846(81)90108-3 ↗
10. Tattersall · 1983
11. Shear-thickening, dilatancy, in suspensions of non-aggregating solid particles dispersed in Newtonian liquids10.1122/1.550017 ↗
12. Study on the shear thickening effect of 3 superplasticizers on the rheological behavior of cement pastes containing or not 4 mineral additives10.1016/S0008-8846(00)00330-6 ↗
13. Explanations for the causes of shear thickening in concentrated 6 colloidal suspensions10.1122/1.550884 ↗
14. Shear-thickening behavior of high-performance cement grouts—influencing mix-design parameters10.1016/j.cemconres.2010.11.004 ↗
15. Mehta · 1998 · 1
16. In-situ mechanical properties of wall elements 20 cast using self-consolidating concrete
17. Improving concrete durability with cementitious materials
18. Effect of supplementary cementitious materials
19. Effect of admixture on hydration of cement, adsorptive behavior of admixture and fluidity and setting of fresh cement paste10.1016/0008-8846(92)90041-S ↗
20. The role of steric repulsive force in the dispersion of cement particles in fresh paste prepared with organic admixtures10.1016/S0008-8846(96)00207-4 ↗
21. Uchikawa H, Importance of recent microstructural developments in cement and concrete, Proceedings, concrete Canada, tribute to Micheline Moranville Regourd, Sherbrooke (Quebec), Canada, October 1994.
22. Role of steric hindrance in the performance of superplasticizers for concrete10.1111/j.1151-2916.1997.tb03169.x ↗
23. A discussion of the paper “Rheological propertied of cements mixes”10.1016/0008-8846(79)90075-9 ↗
24. Nawa T, Eguchi H, Fukaya Y, Effect of alkali sulfate on the rheological behavior of cement paste containing a superplasticizer, Proceedings, 3rd CANMET/ACI International Conference on Superplasticizer and other Chemical Admixtures in Concrete, Norway, 1989, p. 405–424.
25. Yamada · 1998 · 201
26. Vibration attenuation by passive stiffness switching mounts10.1016/0022-460X(90)90703-3 ↗
27. Rheology of extremely shear thickening polymer dispersions (passively viscosity switching fluids)10.1122/1.550257 ↗
28. ACI Committee 237, “Self-Consolidating Concrete (ACI 237R–07)”, American Concrete Institute, Detroit, 2007, 30 p.
29. de Larrard F, Ferraris CF, Sedran T. Fresh concrete: a Herschel–Bulkley material”, Materials and structures, vol. 31, August–September 1998, p. 494–498.10.1007/BF02480474 ↗
30. Use of viscosity-modifying admixture to reduce top-bar effect of anchored bars cast with fluid concrete
31. Khayat KH, Sonebi M, Yahia A, Skaggs BC. Statistical models to predict flowability, washout resistance, and strength of underwater concrete, RILEM International Conference on Production Methods and Workability of Concrete, Glasgow; 1995, p. 463–481.
32. Study on the relationship between superplasticizer molecular structure and fluidity of cement paste
33. The adsorption behavior of PNS superplasticizer and its relation to fluidity of cement paste10.1016/S0008-8846(00)00256-8 ↗
34. Microstructure and flow behavior of fresh cement paste10.1111/j.1151-2916.1997.tb03086.x ↗
35. Studies on mechanisms and physico-chemical parameters at the origin of cement setting. 1. The fundamental processes involved during the cement setting10.1016/0008-8846(95)00068-N ↗