Study on the lightweight hydraulic mortars designed by the use of diatomite as partial replacement of natural hydraulic lime and masonry waste as aggregate
Source abstract
Abstract
Abstract In order to increase energy and resources utilization efficiency, and to find hydraulic mortars with improved properties, in this paper we employed diatomite as partial replacement of natural hydraulic lime NHL2 (NHL) and masonry waste powder (MWP) as aggregate in the preparation of mortars. Diatomite was used at 0%, 10% and 20% replacement by weight for NHL2 and the mortars were designed with different water binder ratios (w/b). The physical, mechanical, and anti-aggressive properties such as freeze and thaw, and acid and sulfate resistance properties of mortars were tested after 14, 28 and 90 days of curing. The introduction of diatomite reduced the density of mortars, and it also reduced the total amount of raw materials, especially the amount of NHL, to prepare same volume of mortars. Diatomite replacement generally enhanced the compressive and flexural strength of hydraulic mortars. The enhancement mainly happened after 14 days of curing when pozzolanic effect was noticeable. Diatomite replacement percentage and w/b influenced porosity, compactness and strength of mortars. There existed optimal diatomite replacement percentage and w/b for mortars to attain largest strength. The introduction of diatomite improved acid and sulfate resistance of mortars greatly. All the hydraulic mortars studied in this paper can still well develop strength under freeze and thaw condition.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Building materials and conservation · Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Nineteenth century hydraulic restoration mortars in the Saint Michael’s Church (Leuven, Belgium) natural hydraulic lime or cement?10.1016/S0008-8846(00)00499-3 ↗
2. Environmental cycling and laboratory testing to evaluate the significance of moisture control for lime mortars10.1016/j.conbuildmat.2010.01.019 ↗
3. Natural hydraulic lime based grouts – the selection of grout injection parameters for masonry consolidation10.1016/j.conbuildmat.2011.05.012 ↗
4. Combined effect of superplasticizer, silica fume and temperature in the performance of natural hydraulic lime grouts10.1016/j.conbuildmat.2013.10.005 ↗
5. Compressive strength development of binary and ternary lime–pozzolan mortars10.1016/j.matdes.2013.05.006 ↗
6. Mechanical properties of natural hydraulic lime-based mortars10.1016/j.cemconres.2004.02.005 ↗
7. Mechanical and cementitious characteristics of ground granulated blast furnace slag and basic oxygen furnace slag blended mortar10.1016/j.matdes.2014.04.002 ↗
8. Hydraulic-lime based concrete: strength development using a pozzolanic addition and different curing conditions10.1016/j.conbuildmat.2008.08.013 ↗
9. Influence of mineral additions and different compositional parameters on the shrinkage of structural expanded clay lightweight concrete10.1016/j.matdes.2013.12.013 ↗
10. Effect of environmental temperature and fly ash addition in hydraulic lime grout behavior10.1016/j.conbuildmat.2010.02.001 ↗
11. Properties and hydration of blended cements with calcareous diatomite10.1016/j.cemconres.2006.05.005 ↗
12. Investigation on pozzolanic effect of perlite powder in concrete10.1016/S0008-8846(02)00924-9 ↗
13. Lightweight cement mortars: advantages and inconveniences of expanded perlite and its influence on fresh and hardened state and durability10.1016/j.conbuildmat.2007.05.006 ↗
14. Mechanical properties of structural concrete incorporation a high volume of Class F fly ash as partial fine sand replacement10.1007/BF02486469 ↗
15. Behaviour of self compacting concrete using Portland pozzolana cement with different levels of fly ash10.1016/j.matdes.2012.11.015 ↗
16. Effect of total cementitious content on shear strength of high-volume fly ash concrete beams10.1016/j.matdes.2012.10.031 ↗
17. Effects of different curing regimes on the compressive strength properties of self compacting concrete incorporating fly ash and silica fume10.1016/j.matdes.2013.03.106 ↗
18. The physical and mechanical properties of composite cements manufactured with calcareous and clayey Greek diatomite mixtures10.1016/j.cemconcomp.2004.02.008 ↗
19. Effects of the usage of diatomite and waste marble powder as partial replacement of cement on the mechanical properties of concrete10.1016/j.conbuildmat.2010.07.002 ↗
20. Use of diatomite as partial replacement for Portland cement in cement mortars10.1016/j.conbuildmat.2007.12.008 ↗
21. Mechanical and mineralogical properties of natural hydraulic lime-metakaolin mortars in different curing conditions10.1016/j.conbuildmat.2013.10.045 ↗
22. New natural hydraulic lime mortars–physical and microstructural properties in different curing conditions10.1016/j.conbuildmat.2013.12.078 ↗
23. TSI · 2002
24. Pressed lightweight concrete containing calcined diatomite aggregate10.1016/j.conbuildmat.2013.05.094 ↗
25. Durability of concrete made with granite and marble as recycle aggregates10.1016/j.jmatprotec.2007.12.120 ↗
26. Characterization of marble powder for its use in mortar and concrete10.1016/j.conbuildmat.2009.08.013 ↗
27. Effect of waste marble dust content as filler on properties of self-compacting concrete10.1016/j.conbuildmat.2008.09.007 ↗
28. Technical and economical aspects of the use of limestone filler additions in cement
29. Use of waste marble aggregates in concrete10.1016/j.conbuildmat.2010.09.037 ↗
30. Towards the assessment of the shear behaviour of masonry in on-site conditions: a study on dry and salt/water conditioned brick masonry triplets10.1016/j.conbuildmat.2014.05.002 ↗
31. Resistance of concrete and mortar against combined attack of chloride and sodium sulphate10.1016/j.cemconcomp.2014.06.013 ↗
32. Damage on hydraulic mortars: the Venice Arsenal10.1016/S1296-2074(02)01163-9 ↗
33. Resistance of self-consolidating concrete to sulfuric acid attack with consecutive pH reduction10.1016/j.cemconres.2007.04.014 ↗
34. Ordinary portland cement mixes with selected admixtures subjected to sulfuric acid attack
35. UNI EN 1015-11. Methods of test for mortar for masonry–determination of flexural and compressive strength of hardened mortar. European Standards; 2007.
36. The use of raw and calcined diatomite in cement production10.1016/j.cemconcomp.2007.08.003 ↗
37. Influence of volcanic originated natural materials as additive on the setting time and some mechanical properties of concrete10.1016/j.conbuildmat.2006.02.011 ↗
38. Properties of concrete containing diatomaceous earth
39. Corrosion behavior of reinforcing steel embedded in concrete produced with finely ground pumice and silica fume10.1016/j.conbuildmat.2010.04.013 ↗
40. Using limestone aggregates and different cements for enhancing resistance of concrete to sulphuric acid attack10.1016/j.cemconres.2005.03.006 ↗
41. Alternative methodology to consider damage and expansions in external sulfate attack modeling10.1016/j.cemconres.2014.05.011 ↗
42. Numerical investigation on expansive volume strain in concrete subjected to sulfate attack10.1016/j.conbuildmat.2012.05.020 ↗