journal article·2013-11

Numerical modeling of the effects of rebar presence and/or multilayered concrete resistivity on the apparent resistivity measured via the Wenner method

F. Presuel-Moreno, Y. Liu, Y.-Y. Wu

Publisher page

Abstract

Abstract The determination of concrete resistivity via the Wenner probe has become an established non-destructive technique either as to verify performance based concrete quality or to assess the chloride diffusivity of existing concrete structures. However, various factors can result in misinterpretations when taking the resistivity measurement. In this study, the finite element method (FEM) is employed to assess the effects of specimen geometry, specimen size, rebar presence, cover depth, multi-layered resistivity, and the combined effects of these factors. The findings confirm that the influence can be quantified by FEM computations to obtain normalization parameters (i.e. cell constants) or to better interpret field resistivity measurements.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Corrosion and Durability · Geophysical Methods and Applications · Non-Destructive Testing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Resistivity assessment of in-situ concrete: the influence of conductive and resistive surface layers10.1680/istbu.1992.21502 ↗
2. The electrical resistivity concrete with emphasis on the use of electrical resistance for measuring moisture content10.1520/CCA10405J ↗
3. Elkey W and Sellevold E J. Electrical resistivity of concrete. Norwegian Public Roads Aministration, Publication No. 80; 1995.
4. Kessler R, Powers R, Paredes M. Resistivity measurements of water saturated concrete as an indicator of permeability. Paper No 05261 in Corrosion 2005, April 3–7, 2005, Houston, TX.10.5006/C2005-05261 ↗
5. Weydert R, Gehlen C. Electrolytic resistivity of cover concrete: relevance, measurement and interpretation. In: Lacasse MA, Vanier DJ., editors. Durability of Building Materials and Components 8, vol.1. Ottawa, Ontario, Canada, 1999. p. 409–19.
6. The effect of steel reinforcement bars on the measurement of concrete resistivity
7. Test methods for onsite measurement of resistivity of concrete – a RILEM TC -154 technical recommendation10.1016/S0950-0618(00)00061-1 ↗
8. Measurement of concrete resistivity for assessment of corrosion severity of steel using Wenner technique
9. Presuel-Moreno F J, Liu Y, Suarez A. Characterization of New and Old Concrete Using Surface Resistivity Measurements (Contract No. BD546), Florida Department of Transportation Final, Report; 2010.
10. Electrical resistivity measurements for quality control during concrete construction
11. Tagg · 1964
12. Influence of surface layers upon the measurement of concrete resistivity
13. Measurement of the electrical-resistivity of reinforced-concrete structures for the assessment of corrosion risk
14. Concrete inspection: interpretation of potential and resistivity measurements
15. Hamilton HR III, et al. Permeability of concrete – comparison of conductivity and diffusion methods (Contract No. BD536). Florida Department of Transportation Final, Report; 2006.
16. Practical evaluation of resistivity of concrete in test cylinders a Wenner array probe10.1016/S0008-8846(96)00175-5 ↗
17. Presuel F, Liu Y and Paredes M. Understanding the effect of rebar presence and/or multilayered concrete resistivity on the apparent surface resistivity measured via the Four-Point Wenner method, paper No. 09217 in CORROSION 2009, March 22–26, 2009, Atlanta, GA.
18. Effect of embedded steel on electrical resistivity measurements on concrete structures
19. Surface resistivity profiles on marine substructures to assess concrete permeability