Concrete cover effect on reinforced concrete bars exposed to high temperatures
Source abstract
Abstract
The mechanical properties of structural reinforcement steel have been investigated after the exposure to high temperatures. Plain steel, reinforcing steel bars embedded into mortar and plain mortar specimens were prepared and exposed to 20, 100, 200, 300, 500, 800 and 950 °C temperature for 3 h individually. The S420 deformed steel bars with diameters of ∅10, ∅16 and ∅20 were used. The mortar was prepared with CEM I 42.5 N cement and fly ash. The tension tests on reinforcements taken from cooled specimens were performed, and the variations in yield strength , ultimate strength and in resilience of three different dimensioned reinforcements were determined. A cover of 25 mm provides protection against high temperatures up to 400 °C. The high temperature exposed plain steel and the steel with 25-mm cover has the same characteristics when the reinforcing steel is exposed to a temperature 250 °C above the exposure temperature of plain steel.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fire effects on concrete materials · Structural Response to Dynamic Loads · Fire dynamics and safety research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Gewain RG, Iwankiw NR, Alfawakhiri F. Facts for steel buildings. Fire AISC; 2003. 51p.
2. Mehta · 1997
3. Microstructures of fire-damaged concrete
4. Effect of fire on shear behaviour of RC beams10.1016/S0045-7949(95)00356-8 ↗
5. Mechanical behaviour of high nitrogen stainless steel reinforced conductor for use in pulsed high field magnets at cryogenic temperature10.1016/S0011-2275(03)00051-1 ↗
6. Numerical modeling of transport phenomena in reinforced concrete exposed to elevated temperatures10.1016/j.cemconres.2004.05.037 ↗
7. Effect of fire on FRP reinforced concrete members10.1016/S0263-8223(02)00045-4 ↗
8. Strength and durability recovery of fire-damaged concrete after post-fire-curing10.1016/S0008-8846(01)00582-8 ↗
9. Numerical modeling of behavior of reinforced concrete columns in fire and comparison with Eurocode 210.1016/j.ijsolstr.2005.03.015 ↗
10. Fire resistance of reinforced concrete columns subjected to 1-, 2-, and 3-face heating10.1061/(ASCE)0733-9445(2004)130:11(1820) ↗
11. Influence of concrete cover on fire resistance of reinforced concrete flexural members10.1061/(ASCE)0733-9445(2004)130:8(1225) ↗
12. Concrete cover requirements for FRP reinforced members in hot climates10.1016/j.compstruct.2005.01.033 ↗
13. Universal design charts for insulating of steel members in fire10.1016/j.jcsr.2005.03.004 ↗
14. Yalaman B. The concrete cover effects of property difference in reinforced steel in buildings under the effect of elevated temperatures. Ms. Thesis, Eskişehir Osmangazi University, The Institute of Science, Department of Civil Engineering; February, 2006. 69p. [in Turkish].
15. Ünlüoğlu E, Topçu İB, Yalaman B. Concrete cover effect on reinforced concrete steel bars exposed to high temperatures, Digest 2007, Turkish Chamber of Civil Engineers, in press.10.1016/j.conbuildmat.2006.11.019 ↗
16. Topçu İB. Concrete. Turkish Chamber of Civil Engineers, Eskişehir Branch, Publication No: 2, Eskişehir, Turkey; 2006. p. 260 [in Turkish].
17. Topçu İB. Concrete Technology. Uğur Ofset A.Ş., Eskişehir, Turkey; 2006. p. 570 [in Turkish].
18. European Committee for Standardization (CEN), Eurocode 3: design of steel structures, Part 1.2: structural fire design, Brussels; 1993.