journal article·2012-05

Influence of inorganic pigments’ addition on the performance of coloured SCC

Valeria Corinaldesi, Saveria Monosi, Maria Letizia Ruello

Publisher page

Abstract

Abstract This paper presents the results of an investigation carried out to develop coloured self-compacting concretes (SCCs) especially devoted to architectural structures. Two different inorganic pigments were tested: the first is cobalt-salt based (for blue coloured SCC), the other iron-oxide based (for red coloured SCC). The leaching behaviour of the two inorganic pigments was assessed by means of leaching test, for estimating release of the most representative soluble ions concerning cementitious materials. The influence of the pigments’ addition on concrete rheology was previously studied by means of rheological tests carried out on cement pastes. Then, SCC mixtures were characterised at the fresh state by means of slump flow and V-funnel tests as well as after hardening by means of compression tests and free dying shrinkage measurements. Low water–cement ratio (equal to 0.45) was always adopted for durability reason. Moreover a shrinkage-free SCC was studied due to the combined use of a CaO-based expansive agent and Shrinkage Reducing Admixture.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Concrete Properties and Behavior · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Nelson I, Wallevik OH. Rheological evaluation of some empirical test methods – preliminary results. In: Wallevik O, Nielsson I, editors. 3rd Int RILEM symp, RILEM Pub. PRO vol. 33; 2003. p. 59–68.
2. Advantages of mortar-based design for coloured self-compacting concrete10.1016/j.cemconcomp.2009.07.005 ↗
3. Collepardi M, Passuelo A. The best SCC: stable, durable and colourable. In: Helene P, Holland TC, Pazzini E, Bittecourt R, editors. Procs IV int ACI/CANMET conf on quality of concrete structures and recent advances in concrete materials and testing, Furnas Centrais Elйtricas SA, Civil Engineering Technological Center, Goibnia, Brasil; 2005.
4. Recycling of rubble from building demolition for low-shrinkage concretes10.1016/j.wasman.2009.11.026 ↗
5. Collepardi M, Collepardi S, Troli R. Pratical applications of SCC in european works. In: Kraus Rudolph N, Naik Tarun R, Claisse Peter, Sadeghi-Pouya, editors. Proc int conf: sustainable construction materials and technologies, special papers proceedings. Pub. UW Milwaukee CBU, 51-50; 2007.
6. Influence of a combination of expansive and shrinkage-reducing admixture on autogenous deformation and self-stress of silica fume high-performance concrete10.1016/j.conbuildmat.2010.06.033 ↗
7. EN-197/1. Cement – Part 1: composition, specifications and conformity criteria for common cements; 2000.
8. Utilisation of high volumes of limestone quarry wastes in concrete industry (self-compacting concrete case)10.1016/j.resconrec.2006.12.004 ↗
9. Self-compacting concrete paste constituents: hierarchical classification of their influence on flow properties of the paste
10. Characterization of marble powder for its use in mortar and concrete10.1016/j.conbuildmat.2009.08.013 ↗
11. EN 933-1. Tests for geometrical properties of aggregates – determination of particle size distribution – sieving method; 1997.
12. EN 1097-6. Tests for mechanical and physical properties of aggregates – determination of particle density and water absorption; 2000.
13. Crack-free concrete for outside industrial floors in the absence of wet curing and contraction joints10.1016/j.cemconcomp.2008.07.002 ↗
14. UNI EN 12457-2. Characterisation of waste – leaching – compliance test for leaching of granular waste materials and sludges – Part 2: one stage batch test at a liquid to solid ratio of 10l/kg for materials with particle size below 4mm (without or with size reduction); 2004.
15. New methodology for designing self-compacting concrete
16. Rheological model for self-consolidating concrete
17. The influence of wall slip on yield stress and viscoelastic measurements of cement paste10.1016/S0008-8846(00)00440-3 ↗
18. Bui VK, Montgomery D. Mixture proportioning method for self-compacting high performance concrete with minimum paste volume. In: Skarendahl A, Petersson O, editors. Self-compacting concrete, procs of the first int RILEM symp, Stockholm, Sweden; 1999. p. 373–84.
19. Jacobs F, Hunkeler F. Design of self-compacting concrete for durable concrete structures. In: Skarendahl A, Petersson O, editors. Self-compacting concrete, procs of the first int RILEM symp, Stockholm, Sweden; 1999. p. 397–407.
20. UNI 6555. Concrete made with aggregate maximum size 30mm. Hydraulic shrinkage determination; 1973.
21. UNI 11041. Prova sul calcestruzzo autocompattante fresco – determinazione dello spandimento e del tempo di spandimento; 2003.
22. UNI 11042. Prova sul calcestruzzo autocompattante fresco – determinazione del tempo di efflusso dall’imbuto; 2003.
23. EN 12390-3. Testing hardened concrete. Part 3: compressive strength of test specimens; 2003.
24. Wallevik ÓH. Rheology – a scientific approach to develop self compacting concrete. In: Wallevik ÓH, Níelsson II, editors. Self compacting concrete, PRO 33, RILEM Publication s.a.r.l, Bagneux, France; 2003. p. 23–32.
25. Behaviour of cementitious mortars containing different kinds of recycled aggregate10.1016/j.conbuildmat.2007.12.006 ↗
26. The role of industrial by-products in self-compacting concrete10.1016/j.conbuildmat.2011.03.001 ↗
27. Variation of formwork pressure with thixotropy of self-consolidating concrete