Effect of thermal treatment on reactivity and mechanical properties of alkali activated shale–slag binder
Source abstract
Abstract
Abstract This paper is aimed at investigating the properties of calcined shale–slag as an alternative alkali-activated constructional binder hardened by geopolymerization reaction with sodium silicate solution. Focus is put on possibilities of thermal treatment in temperature range of 500–1000 °C and investigation of structural changes. These investigations were done by X-ray diffraction (XRD), scanning electron microscopy (SEM), infrared spectroscopy (FTIR), measurement of specific surface area, pozzolanic activity and mechanical strength of prepared geopolymer mixtures. Reaction rates were measured by small amplitude dynamic rheometry as a relatively new method for investigation of geopolymerization process. The best compression strength of 82.52 MPa and highest reactivity, according to the pozzolanic activity and dynamic rheometry, was achieved by thermal treatment at 600 °C for duration of 4 h.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Geopolymer technology: the current state of the art10.1007/s10853-006-0637-z ↗
2. Pacheco-Torgal F, Castro-Gomes J, Jalali S. Alkali-activated binders: a review: Part 1. Historical background, terminology, reaction mechanisms and hydration products. Const Build Mater 2008;22:1305–14.10.1016/j.conbuildmat.2007.10.015 ↗
3. Pacheco-Torgal F, Castro-Gomes J, Jalali S. Alkali-activated binders: a review: Part 2. About materials and binders manufacture. Const Build Mater 2008;22:1315–22.10.1016/j.conbuildmat.2007.03.019 ↗
4. The role of inorganic polymer technology in the development of “Green concrete”10.1016/j.cemconres.2007.08.018 ↗
5. Characterization of fly ashes. Potential reactivity as alkaline cements10.1016/S0016-2361(03)00194-7 ↗
6. Innovation in use and research on cementitious material10.1016/j.cemconres.2007.09.025 ↗
7. Effects of micro-structure characteristics of interfacial transition zone on the compressive strength of self-compacting geopolymer concrete10.1016/j.conbuildmat.2012.11.067 ↗
8. Use of inorganic polymer to improve the fire response of balsa sandwich structure10.1061/(ASCE)0899-1561(2006)18:3(390) ↗
9. Fire resistance of high-volume fly ash mortars with nanosilica addition10.1016/j.conbuildmat.2012.05.028 ↗
10. Development of metakaolin–fly ash based geopolymers for fire resistance applications10.1016/j.conbuildmat.2014.01.040 ↗
11. Experimental feasibility study of geopolymer as the next-generation soil stabilizer10.1016/j.conbuildmat.2013.06.017 ↗
12. Soil stabilisation using alkaline activation of fly ash for self compacting rammed earth construction10.1016/j.conbuildmat.2012.06.037 ↗
13. Rammed earth construction with granitic residual soils: the case study of northern Portugal10.1016/j.conbuildmat.2013.05.047 ↗
14. Inorganic polymeric foam as a sound absorbing and insulating material10.1016/j.conbuildmat.2013.09.042 ↗
15. Geopolymer foam concrete: an emerging material for sustainable construction10.1016/j.conbuildmat.2014.01.081 ↗
16. The action of alkalis on blast-furnace slag
17. Glukhovsky · 1959
18. Glukhovsky VD. Soil Silicate Articles and Structures, 1967, Kiev, p. 156.
19. Davidovits J. Mineral polymers and methods of making them. 1982, U.S. Patent 4,349,386.
20. Davidovits J. Synthetic mineral polymer compound of the silicoaluminates family and preparation process. 1984, U.S. Patent 4,472,199.
21. Geopolymers – inorganic polymeric new materials10.1007/BF01912193 ↗
22. Chemically bonded cementitious materials based on metakaolin
23. Effects of aluminates on the formation of geopolymers10.1016/j.mseb.2004.11.008 ↗
24. Do geopolymers actually contain nanocrystalline zeolites? – a re-examination of existing results10.1021/cm050230i ↗
25. The effect of alkali cations on aluminum incorporation in geopolymeric gels10.1021/ie0494216 ↗
26. The effect of alkali and Si/Al ratio on the development of mechanical properties of metakaolin-based geopolymers10.1016/j.colsurfa.2006.05.044 ↗
27. Alkali activated fly ash binders A comparative study between sodium and potassium activators10.3989/mc.2006.v56.i281.92 ↗
28. Immobilization of cesium in alkaline activated fly ash matrix10.1016/j.jnucmat.2005.06.006 ↗
29. Shi · 2006
30. Fernández-Jiménez A, Palomo A, Alonso MM. Alkali activation of fly ashes: mechanisms of reaction. Proceeding Non traditional Cement and Concrete 2005: Czech Republic, Brno. p. 13–4.
31. Consolidation mechanism of materials obtained from sodium silicate solution and silica-based aggregates10.1016/j.jnoncrysol.2011.04.006 ↗
32. New cements for the 21st century: the pursuit of an alternative to Portland cement10.1016/j.cemconres.2011.03.016 ↗
33. Some aspects of composite inorganic polysialates10.1007/s10973-011-1625-3 ↗
34. Effect of heat treatment on reactivity-strength of alkali-activated natural pozzolans10.1016/j.conbuildmat.2011.04.044 ↗
35. Effect of type, form, and dosage of activators on strength of alkali-activated natural pozzolans
36. Influence of the processing temperature on the compressive strength of Na activated lateritic soil for building applications10.1016/j.conbuildmat.2014.04.100 ↗
37. Development of alkali-activated binder using hwangtoh without calcination10.1016/j.conbuildmat.2014.02.003 ↗
38. Mechanical and microstructural dissimilarities in alkali-activation for six Class F Korean fly ashes10.1016/j.conbuildmat.2013.11.058 ↗
39. Setting and mechanical properties of alkali-activated fly ash/slag concrete manufactured at room temperature10.1016/j.conbuildmat.2013.05.107 ↗
40. Evolution of alkaline activated ground blast furnace slag–ultrafine palm oil fuel ash based concrete10.1016/j.matdes.2013.09.047 ↗
41. Binding mechanism and properties of alkali-activated fly ash/slag mortars10.1016/j.conbuildmat.2012.11.003 ↗
42. A comprehensive overview about the influence of different additives on the properties of alkali-activated slag – a guide for Civil Engineer10.1016/j.conbuildmat.2013.04.011 ↗
43. Alkali-activated metakaolin: a short guide for civil engineer – an overview10.1016/j.conbuildmat.2012.12.030 ↗
44. Bernal SA, Mejía de Gutiérrez R, Provis JL. Engineering and durability properties of concretes based on alkali-activated granulated blast furnace slag/metakaolin blends. Const Build Mater 2012;33:99–8.10.1016/j.conbuildmat.2012.01.017 ↗
45. CHAMOTTE NP Special. ČLUZ a.s. [online]. 16.2.2015 [cit. 2015-02-16]. Accessible: .
46. Structural evolution during geopolymerization from an early age to consolidated material10.1021/la300868v ↗
47. Rheological behavior of alkali-activated metakaolin during geopolymerization10.1016/j.jnoncrysol.2011.07.013 ↗
48. Schroeder PA. Infrared Spectroscopy in clay science. The Clay Mineral Society, Teaching Clay Science CMS Workshop Lectures; 2002, Vol. 11. p. 181–6.
49. Thermal treatment of kaolin clay to obtain metakaolin10.2298/HEMIND100322014I ↗
50. Influence of Metakaolinization temperature on the formation of zeolite 4A from Kaolin10.1180/claymin.1996.031.2.11 ↗
51. Structural and physical changes of re-calcined metakaolin regarding its reactivity10.1016/j.conbuildmat.2014.12.062 ↗
52. Effect of Thai Kaolin on properties of agricultural ash blended geopolymers10.1016/j.conbuildmat.2013.11.079 ↗
53. Shultz · 2010
54. The geopolymerisation of alumino-silicate minerals10.1016/S0301-7516(99)00074-5 ↗
55. Behavior of common rock-forming minerals in a strongly basic NaOH solution
56. Dissolution kinetics of stilbite at various temperatures under alkaline conditions
57. Brantley LS. Kinetics of mineral dissolution. In: kinetics of water–rock interaction, Springer; 2008, Chapter 5. ISBN 978-0-387-73563-4.