journal article·2013-12

Tensile properties of high volume fly-ash (HVFA) concrete with limestone aggregate

Isamu Yoshitake, Hiroki Komure, Ayman Y. Nassif, Sunao Fukumoto

Publisher page

Abstract

This paper presents the results of an investigation into the tensile properties of high volume fly ash (HVFA) concrete. Prismatic concrete specimens made with 50% replacement of cement by fly ash were made and cured to simulate concreting in various practical environments during summer and winter in western Japan. The temperature inside the concrete as well as in the curing environment was recorded. The prismatic concrete specimens were subjected to uniaxial uniform tensile stress. The full tensile stress–strain response for HVFA concrete was determined. The maximum tensile stress and the tensile Young’s modulus were estimated. The authors’ previously established correlations between the uniaxial tensile strength and both the splitting tensile strength and the compressive strength were examined for HVFA concrete. It is evident that the tensile modulus calculated based on formulae provided in JSCE design codes can be significantly underestimated. In addition, the thermal properties of HVFA concrete were investigated. Using HVFA 50% replacement of cement resulted in 40% reduction in the temperature rise compared to the concrete without fly ash. Regardless of use of fly ash, limestone aggregate concrete resulted in approximately half of coefficient of thermal expansion of normal concrete.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Concrete Properties and Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Reducing CO2 emissions – the role of fly ash and other supplementary cementitious materials
2. Global concrete industry sustainability
3. Superplasticized fly ash concrete for structural applications
4. Selected properties of high-volume fly ash concretes
5. Mehta · 2006
6. Long-term strength development of high-volume fly ash concrete10.1016/0958-9465(90)90005-I ↗
7. Abrasion resistance of concrete as influenced by inclusion of fly ash
8. Effect of source of fly ash on abrasion resistance of concrete10.1061/(ASCE)0899-1561(2002)14:5(417) ↗
9. Long-term performance of high-volume fly ash concrete pavements
10. High volume fly ash abrasion resistant concrete10.1061/(ASCE)0899-1561(2002)14:3(274) ↗
11. Relation between abrasion resistance and flexural strength of high volume fly ash concrete10.1007/BF02533087 ↗
12. Abrasion-porosity-strength model for fly ash concrete10.1061/(ASCE)0899-1561(2003)15:4(408) ↗
13. Strength properties of high-volume fly ash roller compacted and workable concrete, and influence of curing condition10.1016/j.cemconres.2004.07.037 ↗
14. Effect of fly ash content and aggregate gradation on the durability of concrete pavements10.1061/(ASCE)0899-1561(2007)19:5(367) ↗
15. Evaluation of properties of high-volume fly-ash concrete for pavements10.1061/(ASCE)0899-1561(2007)19:10(906) ↗
16. Das · 2010
17. Uniaxial tensile strength and tensile Young’s modulus of fly-ash concrete at early age10.1016/j.conbuildmat.2012.11.022 ↗
18. Mechanical properties and durability of concrete made with high-volume fly ash blended cements using a coarse fly ash
19. Uniaxial tension test of slender reinforced early age concrete members10.3390/ma4081345 ↗
20. A prediction method of tensile Young’s modulus of concrete at early age10.1155/2012/391214 ↗
21. Direct tension test and tensile strain capacity of concrete at early age10.1016/S0008-8846(03)00231-X ↗
22. S. Upadhyaya, G.D. Goulias and K. Obla, Evaluation of in place strength of high-volume fly ash concrete. In: The first international conference on recent advances in concrete technology, Arlington, VA; 2007.
23. Strength development and temperature rise in large concrete blocks containing high volumes of low-calcium (ASTM class F) fly ash
24. Influence of cold weather during casting and curing on the stiffness and strength of concrete10.1016/j.conbuildmat.2013.03.016 ↗
25. Fine limestone additions to regulate setting in high volume fly ash mixtures10.1016/j.cemconcomp.2011.09.004 ↗
26. Powder additions to mitigate retardation in high-volume fly ash mixtures
27. Hotter cements, cooler concretes temperature rise in concretes
28. In situ measurement of coefficient of thermal expansion in hardening concrete and its effect on thermal stress development10.1016/j.conbuildmat.2012.07.111 ↗
29. The way concrete recycling should be10.3151/jact.3.3 ↗
30. ACI 318-08. Building code requirements for structural concrete and commentary; 2008.
31. Standard specifications for concrete structures
32. A.Yoshimoto Deformation and fracture of concrete. Gakkensya; 1990 [in Japanese].
33. Japan Society for Civil Engineers. Standard specifications for concrete structures. Design; 2013. p. 39 [in Japanese].
34. I.Yoshitake, H.Nakamura, T.Tanimoto and S.Hamada, A development of simplified testing method of adiabatic temperature rise for the use at sites. J Mater Concr Struct Pavements; 1998; 606:103–110. (in Japanese).10.2208/jscej.1998.606_103 ↗
35. Estimation of adiabatic temperature rise of HVFA concrete by simplified method10.2472/jsms.57.509 ↗