journal article·2014-01

Development of a hollow cylinder test for the elastic modulus distribution and the ultimate strength of bamboo

Po-Hua Lee, Marty Odlin, Huiming Yin

Publisher page

Abstract

Abstract Bamboo, which has become increasingly popular as a renewable structural material in past decades, is a natural functionally graded material whose elastic modulus gradually increases from the inner to the outer surfaces. A hollow cylinder test has been developed to characterize the strength and stiffness of bamboo specimens in the cross sectional plane. A hydraulic jack is used to inflate the rubber hose, which is inserted into a bamboo specimen to apply an inner pressure. The strains on the inner and outer surfaces of the bamboo are measured under an increasing inner pressure until that the bamboo specimen splits. The effective elastic modulus of bamboo varies continuously in the radial direction that is tentatively approximated by a power, exponential or linear function, respectively, each of which includes two parameters to be determined experimentally. Given an inner pressure, the stress and strain distributions along the radial direction can be analytically derived for the three forms of elastic modulus distribution functions, respectively. Fitting the test data with the formulation, we can obtain the two parameters for each elastic modulus distribution function. Based on the cellular microstructure and comparison of the elastic modulus distribution, the exponential function of elastic modulus provides the most favorable results and is thus recommended for a future standard test method, which can be used in bamboo material characterization and quality control.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bamboo properties and applications · Natural Fiber Reinforced Composites · Tree Root and Stability Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. The greening of the concrete industry10.1016/j.cemconcomp.2008.12.010 ↗
2. Ghavami K. Non-conventional materials and technologies: application and future tendencies. In: Proceedings of the 11th international conference on non-conventional materials and technologies. Bath, UK; 2009.
3. An environmental, economic and practical assessment of bamboo as a building material for supporting structures10.1016/j.conbuildmat.2005.02.023 ↗
4. One laminated bamboo-frame house per hectare per year10.1016/j.conbuildmat.2008.01.004 ↗
5. Effectiveness of ECC in curtailing re-emergence of weeds on an earth embankment surface10.1016/j.conbuildmat.2009.10.004 ↗
6. Cementitious building materials reinforced with vegetable fibres: a review10.1016/j.conbuildmat.2010.07.024 ↗
7. Effects of layered structure on the physical and mechanical properties of laminated moso bamboo (Phyllosachys edulis) flooring10.1016/j.conbuildmat.2011.08.038 ↗
8. A low-technology approach toward fabrication of Laminated Bamboo Lumber10.1016/j.conbuildmat.2011.10.046 ↗
9. Intelligent functionally graded material: bamboo10.1016/0961-9526(95)00037-N ↗
10. Fracture properties of bamboo10.1016/S1359-8368(01)00022-1 ↗
11. Anatomy and utilization of bamboos
12. Ghavami K. Application of bamboo as a low-cost construction material. In: Proceedings of international bamboo workshop. Cochin, India; 1988.
13. The mechanical structures of bamboos in viewpoint of functionally gradient and composite materials10.1177/002199839603000703 ↗
14. Fiber texture and mechanical graded structure of bamboo10.1016/S1359-8368(96)00020-0 ↗
15. Mechanical properties of structural bamboo for bamboo scaffoldings10.1016/S0141-0296(01)00110-9 ↗
16. Column buckling of structural bamboo10.1016/S0141-0296(02)00219-5 ↗
17. The effect of fiber density on strength capacity of bamboo10.1016/j.matlet.2004.03.029 ↗
18. Modeling bamboo as a functionally graded material: lessons for the analysis of affordable materials10.1007/s10853-006-0232-3 ↗
19. Cell-wall mechanical properties of bamboo investigated by in-situ imaging nanoindentation
20. Strength analysis of bamboo by microscopic investigation of bamboo fibre10.1016/j.conbuildmat.2007.03.031 ↗
21. Tensile properties of Moso bamboo (Phyllostachys pubescens) and its components with respect to its fiber-reinforced composite structure10.1007/s00226-009-0290-1 ↗
22. The mechanical properties of bamboo and vascular bundles10.1557/jmr.2011.314 ↗
23. Mechanical properties of functionally graded hierarchical bamboo structures10.1016/j.actbio.2011.06.008 ↗
24. Experiments with rings to determine the anisotropic elastic constants of bamboo10.1016/j.conbuildmat.2011.12.089 ↗
25. Assessment of fire reaction and fire resistance of Guadua angustifolia kunth bamboo10.1016/j.conbuildmat.2011.08.028 ↗
26. A transversely isotropic law for the determination of the circumferential young’s modulus of bamboo with diametric compression tests
27. U.S. Department of Agriculture Forest Service. Wood handbook: wood as an engineering material. Madison, Wisconsin; 1999.
28. Exact solutions for stresses in functionally graded pressure vessels10.1016/S1359-8368(01)00041-5 ↗
29. Elastic analyses of heterogeneous hollow cylinders10.1016/j.mechrescom.2006.01.005 ↗
30. Stresses in thick-walled FGM cylinders with exponentially-varying properties10.1016/j.engstruct.2006.12.003 ↗
31. Mechanical characterization of single bamboo fibers with nanoindentation and microtensile technique10.1515/hf.2011.009 ↗
32. George · 2000
33. Brovold TE, Buttlar WG. Compact hollow cylinder tensile tester, US Patent, 2003, US6595068.