journal article·2014-11

Seismic performance of coconut-fibre-reinforced-concrete columns with different reinforcement configurations of coconut-fibre ropes

Majid Ali

Publisher page

Abstract

Abstract Three different reinforcement patterns of coconut-fibre ropes in columns are investigated in this experimental study. Coconut-fibre-reinforced-concrete is used to cast columns. This new material is under investigation for the production of low cost but safe housing in earthquake prone regions. Overall ductile behaviour of structure is a basic requirement; therefore coconut fibres are selected because of their highest toughness amongst all natural fibres. Incremental ground motion excitations are applied to the columns using a shake table. The excitations are time-scaled to produce damage in columns. This is to match the frequency of excitation with that of structure. The dynamic properties of coconut fibre and rope reinforced concrete columns are determined by an impact test after each excitation. A change in natural frequency is observed, showing that there is some non-visible material degradation in the specimen before cracking. Out of three patterns, column with multiple central ropes performed well showing rocking phenomenon.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Natural Fiber Reinforced Composites · Tree Root and Stability Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (12)

Show source-provided references
1. Characterization of the morphological, physical, and mechanical properties of seven nonwood plant fiber bundles10.1007/s10086-006-0836-x ↗
2. Natural fibre-polymer composites10.1016/0958-9465(90)90049-4 ↗
3. Ali M, Chouw N. Coir fibre and rope reinforced concrete beams under dynamic loading. In: Annual Australian earthquake engineering society conference, Newcastle Earthquake – 20 years on December 11–13, New castle Australia, Paper 04; 2009.
4. Ali M, Chouw N. Consequence of crack development for dynamic behaviour of coir fibre reinforced concrete structures. In: 9th US national and 10th Canadian conference on earthquake engineering: Reaching Beyond Borders, July 25–29, Toronto, Canada. Paper 347; 2010.
5. Testing of passive energy dissipation systems10.1193/1.1585720 ↗
6. Kanazawa K, Hirata K, Matsuda A. Shake table test of three dimensional base isolation system using laminated thick rubber bearings. In: 15th International conference on structural mechanics in reactor technology (SMiRT-15) August 15–20, Seoul, Korea, p. 367–74.
7. Rocking stability of masonry arches in seismic regions10.1193/1.2985763 ↗
8. Some aspects of testing small-scale masonry building models on simple earthquake simulators10.1002/eqe.4290211102 ↗
9. Experimental investigation on the seismic response of a steel liquid storage tank equipped with floating roof by shaking table tests10.1002/eqe.945 ↗
10. Shaking table testing of a U-shaped plan building model10.1139/l99-030 ↗
11. Twigden K, Li X. Ali M, Oyarzo-Vera C, Chouw N. Effect of harmonic excitations on structures. In: Annual New Zealand society for earthquake engineering conference, Earthquake prone buildings: how ready are we? March 26–28, Wellington, New Zealand, Paper 37; 2010.
12. Mechanical and dynamic properties of coconut fibre reinforced concrete10.1016/j.conbuildmat.2011.12.068 ↗