An initial trial mixture proportioning procedure for structural lightweight aggregate concrete
Source abstract
Abstract
Abstract In this study, a straightforward mixture-proportioning procedure for structural lightweight-aggregate concrete (LWAC) was developed to determine the unit content of each ingredient to achieve the target values for slump, compressive strength, dry density, and air content of the concrete. To develop this approach, the design equations to determine the water-to-cement ratio and the unit water content were empirically formulated by performing a regression analysis over 347 data points. These data points were compiled from ordinary Portland cement concrete mixtures with expanded fly ash or clay lightweight aggregates. To determine the volumetric ratio of coarse aggregate per unit weight, a mathematical solution was established under two boundary conditions: the absolute volume and the dry density of concrete. The reliability of the proposed procedure was verified by testing five ready-mixed concrete batches at different replacement levels of lightweight fine aggregates for natural sand. In the concrete batches, expanded clay particles that were manufactured in a rotary kiln were used as the lightweight aggregates. The required values of the target parameters and the experimental values were compared. The results demonstrated that the proposed procedure provided a reasonable guide to obtain the first trial mixture of LWAC that varied with the requirements of the concrete and the properties of lightweight aggregates.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Recycled Aggregate Concrete Performance
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. ACI Committee 211. Standard practice for selecting proportions for structural lightweight concrete (ACI 211.2-98). American Concrete Institute; 1998.
2. ACI Committee 213. Guide for structural lightweight-aggregate concrete (ACI 213R-03). American Concrete Institute; 1998.
3. ASTM C 330. Annual book of ASTM standards: V. 4.02. ASTM International; 2012.
4. Effect of water content on the properties of lightweight alkali-activated slag concrete10.1061/(ASCE)MT.1943-5533.0000244 ↗
5. Chandra · 2003
6. Chen HJ, Yen T, Lai TP. A new proportion method of light-weight aggregate concrete based on dividing strength. In: Holand et al., editors. International symposium for structural lightweight aggregate concrete 1995;20(4):463–71.
7. A simple mix design method for structural lightweight aggregate10.1617/s11527-013-0029-1 ↗
8. Yang KH. Modeling of the mechanical properties of structural lightweight concrete based on size effects. Technical Report, Department of Plant Architectural Engineering Kyonggi University; 2011.
9. Neville AM. Properties of concrete. Addison Wesley Longman; 1995.
10. ACI Committee 318-11. Building code requirements for structural concrete and commentary. American Concrete Institute; 2008.
11. MacGregor JG, Wight JK. Reinforced concrete: mechanics and design. Prentice-Hall Inc.; 2006.
12. ACI Committee 214. Recommended practice for evaluation of strength test results of concrete. American Concrete Institute; 1977.
13. Nowak AS, Szerszen MM. Reliability-based calibration for structural concrete: phase 1. Report UMCEE 01-04. University of Michigan; 2001.