journal article·2014-07

Uniaxial cyclic tensile mechanical properties of ethylene tetrafluoroethylene (ETFE) foils

Jianhui Hu, Wujun Chen, Renjie Luo, Bing Zhao, Rui Sun

Publisher page

Abstract

This paper concerns the uniaxial cyclic tensile mechanical properties of ethylene tetrafluoroethylene (ETFE) foils that are widely used in mechanical and construction industries. The experiments involved eight cases with loading stress amplitudes ranging from 4 to 21 MPa. The experimental results show that the yield stress is a main mechanical property as the hysteresis loop and ratcheting strains become noticeable after the yield stress and that the elastic modulus, hysteresis loop and ratcheting strains evolve with the number of cycles and loading stress amplitude. To quantify these mechanical properties, a newly-developed MATLAB program is employed to process the experimental data. It is found that the appropriate cyclic elastic modulus needs to be divided into three kinds and that ratcheting strains and hysteresis loop area in the 16th cycle are found to be approximate stable. These findings could offer an understanding of the discrepancies between numerical results calculated based on the uniaxial mechanical properties and experimental results under field loading conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Elasticity and Material Modeling · Probabilistic and Robust Engineering Design · Mechanical Behavior of Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Zhang · 2008
2. Structural studies on ethylene-tetrafluoroethylene copolymer 1. Crystal structure10.1016/0032-3861(86)90063-7 ↗
3. The effect of some fluoropolymers’ structures on their response to UV irradiation10.1002/(SICI)1097-4628(19981121)70:8<1471::AID-APP6>3.0.CO;2-A ↗
4. ETFE foil cushions in roofs and atria10.1016/S0950-0618(01)00013-7 ↗
5. Chen · 2005
6. Application of ETFE membrane structure on national aquatics center (water cube)
7. Cycle loading and creep tests of ETFE foil
8. Uniaxial deformation and orientation of ethylene-tetrafluoroethylene films10.1016/j.polymertesting.2013.09.007 ↗
9. Experimental studies on summer performance and feasibility of a BIPV/T ethylene tetrafluoroethylene (ETFE) cushion structure system10.1016/j.enbuild.2013.10.033 ↗
10. ETFE aircushion membrane configurations, structural performances and material properties experiments
11. Uniaxial tensile properties of ETFE foils
12. Moritz · 2007
13. Schiemann L, Hinz S, Stephani M. Tests of ETFE-foils under biaxial stresses. Structural Membrane. Stuttgart; 2009. p. 155–9.
14. Schiemann · 2009
15. Static analysis of ETFE cushions in membrane structures
16. Mechanical analysis and diaphragm effect of ETFE cushions
17. Cyclic viscoelastoplasticity and low-cycle fatigue of polymer composites10.1016/j.ijsolstr.2011.03.009 ↗
18. Uniaxial and biaxial mechanical properties of ETFE foils10.1016/j.polymertesting.2011.02.004 ↗
19. Lee S-J, Lee S-R, Lee C-h. Tensile strength tests on ETFE film for roof materials in large membrane structures. IASS. Shanghai; 2010. p. 2255–65.
20. On the nature of the yield point phenomenon10.1016/j.actamat.2012.12.003 ↗
21. Moritz K. Time-temperature shift (TTS) of ETFE-foils. Structural Membranes. Stuttgart, Germany; 2009.
22. Kawabata M, Moriyama F. Study on viscoelastic characteristics and structural response of film membrane structures. IASS-APCS 2006 Symposium. Beijing, China; 2006.
23. Nonlinear mechanical response of high density polyethylene. Part II: Uniaxial constitutive modeling10.1002/pen.11684 ↗
24. Ratcheting behavior of PTFE under cyclic compression10.1016/j.polymertesting.2005.07.006 ↗
25. Membrane structure active flatness control using genetic algorithm with online objective reweighting10.1016/j.actaastro.2010.11.009 ↗