Hot box measurements of pumice aggregate concrete hollow block walls
Source abstract
Abstract
Abstract Due to its relatively low thermal conductivity characteristics and being a local product, pumice aggregate concrete (PAC) blocks are increasingly used as a masonry wall unit in Turkey. However, there is limited technical and scientific knowledge on hygrothermal performance of PAC blocks. A research project is conducted to study hygrothermal performance of PAC block walls using a calibrated hot box method. Temperature and humidity measurements were carried out at the surfaces of the test wall and in the hollows of blocks on different courses. The results, in general, indicate that the hollows of blocks perform better in terms of thermal transmittance than the lightweight solid parts of them. Noticeable changes are observed in hygrothermal behaviour of the lower and the upper courses depending on the indoor and outdoor climate test conditions. The heterogeneous material and rough surface characteristics of the blocks, in addition to the wet construction type of block wall are the most problematic issues that make measurements and assessments difficult.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hygrothermal properties of building materials · Masonry and Concrete Structural Analysis · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Gündüz L. Pomza Teknolojisi: Pomza Karakterizasyonu [Pumice Technology: Pumice Characterisation]. vol. 2. Isparta, Turkey; 1998.
2. Environmental chamber for investigation of building performance10.1061/(ASCE)1076-0431(1997)3:2(97) ↗
3. Hygrothermal calculations and laboratory tests on timber-framed wall structures10.1016/S0360-1323(02)00207-X ↗
4. Comparison of experimental and numerical results of wood-frame wall assemblies wetted by simulated wind-driven rain infiltration10.1016/j.enbuild.2006.12.004 ↗
5. Zarr · 1995
6. Reduced linear state model of hollow blocks walls, validation using hot box measurements10.1016/j.enbuild.2004.03.008 ↗
7. Non-linear thermal analysis of light concrete hollow brick walls by the finite element method and experimental validation10.1016/j.applthermaleng.2005.10.012 ↗
8. U-value of dried wall made of perforated porous clay bricks – hot box measurement versus numerical analysis10.1016/S0378-7788(02)00209-8 ↗
9. Hygrothermal performance of hollow bricks and current standards10.1016/S0378-7788(01)00060-3 ↗
10. Simulation of indoor temperature and humidity conditions including hygrothermal interactions with the building envelope10.1016/j.solener.2004.03.002 ↗
11. Hygrothermal performance of a new briquette design10.1016/0360-1323(96)85578-8 ↗
12. Integrated methodology for evaluation of energy performance of the building eclosures – part I: test program development10.1177/1744259108093316 ↗
13. Integrated methodology for evaluation of energy performance of the building eclosures – part II: examples of application to residential walls10.1177/1744259108093317 ↗
14. Kosny J. ORNL Buildings Technology Center, Building Envelopes Program, Hotbox Test R-value Database, Masonry Systems, Concrete masonry unit; (accessed 15.01.09).
15. Göcer Ö, Özkan E, Edis E, Kus H. CFD analysis of heat transfer through pumice aggregate concrete blocks. In: Bayazit NT, Manioglu G, Oral GK, Yilmaz Z, editors. Energy efficiency and new approaches. Proceedings of the fourth international building physics conference, Istanbul; 2009, p. 3–10.
16. Standard test method for thermal performance of building materials and envelope assemblies by means of a hot box apparatus
17. Thermal insulation – determination of steady-state thermal transmission properties – calibrated and guarded hot box
18. Salmon DR, Tye RP. Measurements of thermal and moisture properties of moist masonry materials: issues and problem areas. In: Wang H, Porter W, editors. Proceedings of the 27th international thermal conductivity conference. Proceedings of the 50th international thermal expansion, symposium; 2005.