journal article·2014-08

Analysing the effects of the mesoscopic characteristics of mineral powder fillers on the cohesive strength of asphalt mortars at low temperatures

Lv Dan, Zheng Chuanfeng, Qin Yong, Bi Heng, Li Keyao, Huang Junfei

Publisher page

Abstract

Abstract The mesoscopic characteristics of mineral powder fillers were tested, and their effects on the cohesive strength of asphalt mortars at low temperatures were analysed. The BT-1600 image particle analysis system was employed to test the mesoscopic grading, length-to-diameter ratio and circular degree of mineral powder fillers. Infiltrating free-pressure water was used to test mesoscopic void characteristics. Three kinds of asphalt mortars were prepared with different mineral powder fillers. Their low-temperature cohesive strengths were tested quantitatively according to a technology for testing tensile cohesive strength. Results showed that the differences in the mesoscopic characteristics of the three kinds of mineral powder fillers led to different low-temperature cohesive strengths of the three asphalt mortars, although their preliminary screening results were nearly the same. The mesoscopic void characteristics of mineral powder fillers can result from the combined effects of mesoscopic grading, length-to-diameter ratio, specific surface area and circular degree, among others. And it can also estimate the proportions of fixed and free asphalts. By using the mesoscopic void characteristics of mineral powder fillers as intermediaries based on the proportions of fixed and free asphalts, we can identify the effects of these characteristics on the low-temperature cohesive strength of asphalt mortars.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Concrete and Cement Materials Research · Rock Mechanics and Modeling

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Evaluation of andesite waste as mineral filler in asphaltic concrete mixture10.1016/j.conbuildmat.2011.12.093 ↗
2. Effect of cement kiln dust and rock dust as mineral fillers on bulk specific gravity of fine aggregates10.1520/JTE103255 ↗
3. Effect of mineral filler characteristics on asphalt mastic and mixture rutting potential10.3141/2208-05 ↗
4. Towards the simulation of mould filling with polymer composites reinforced with mineral fillers and short fibres10.1007/s12289-009-0658-7 ↗
5. Research on high- and low-temperature properties of asphalt-mineral filler mastic10.1061/(ASCE)MT.1943-5533.0000015 ↗
6. Experimental and theoretical characterization of the engineering behavior of bitumen mixed with mineral filler10.1617/s11527-007-9302-5 ↗
7. The structure of mineral fillers and their stiffening properties in filler-bitumen mastics10.1617/s11527-007-9283-4 ↗
8. Effects of type and content of mineral filler on viscosity of asphalt mastic and mixing and compaction temperatures of asphalt mixture10.3141/2051-05 ↗
9. Modification of a mineral filler for production of asphalt concrete10.1007/s10553-007-0059-x ↗
10. Effect of aggregate nature on the fatigue-cracking behavior of asphalt mixes10.1016/j.matdes.2012.12.048 ↗
11. Mechanism of low-temperature adhesion failure in asphalt mixtures with dense-suspension and void-skeleton structures10.1016/j.conbuildmat.2012.06.058 ↗
12. Evaluating adhesion properties and moisture damage susceptibility of warm-mix asphalts bitumen bond strength and dynamic modulus ratio tests10.3141/2295-06 ↗
13. Research on effects of deicing salt on adhesion properties between asphalt mortar and aggregate
14. Exploratory use of Rigden voids as design criteria for the design of sand treated with emulsion10.1080/14680629.2008.9690131 ↗
15. Faheem Ahmed F, Bahia Hussain U, Yang Shih-Hsien, Al-Qadi Imad. Evaluation of Rigden fractional voids test method and the relation to mastic viscosity. In: 85th association-of-asphalt-paving-technologists annual meeting and technical sessions; 2010.
16. Quantitative test technology study on the mesoscopic strength parameters of the mineral aggregate contact surface of bituminous-stabilized macadam10.1016/j.conbuildmat.2012.11.059 ↗
17. Interfacial thickness and interaction between asphalt and mineral fillers10.1617/s11527-013-0083-8 ↗
18. Rheological changes in the bitumen caused by heating and interaction with rubber during asphalt-rubber production10.1007/s00397-013-0748-9 ↗
19. Influence of the chloride-based anti-freeze filler on the properties of asphalt mixtures10.1016/j.conbuildmat.2013.09.057 ↗
20. Evaluation of rice husk ash as filler in hot mix asphalt concrete10.1016/j.conbuildmat.2013.06.029 ↗
21. Laboratory studies to investigate the properties of novel cold-rolled asphalt containing cement and waste bottom ash10.1080/14680629.2013.852612 ↗
22. Influence of filler fractional voids on mastic and mixture performance10.3141/2294-08 ↗
23. Characterization of fly ash bituminous concrete mixes10.1061/(ASCE)MT.1943-5533.0000125 ↗
24. Pearce BL. Simple tests to enhance the South African HMA design guidelines. In: 24th Annual Southern African transport conference; 2005.
25. Material factors that influence anisotropic behavior of aggregate bases10.3141/2059-03 ↗