journal article·2015-09

Novel mechanical behaviour of perlite/sodium silicate composites

Md Arifuzzaman, Ho Sung Kim

Publisher page

Abstract

Abstract A novel mechanical behaviour of perlite/sodium silicate composites is studied with the benefits of a new manufacturing method based on the perlite particle buoyancy. The objective was to develop perlite composites and to understand their quantitative relations between manufacturing parameters, volume fractions of constituents, and properties. For the composites development, sodium silicate dehydration behaviour was characterised with phases formed during dehydration i.e. liquid, gel, and solid phases. The water loss–time curve for dehydration was found to have three distinctive parts – linear part at an early stage for liquid phase, followed by non-linear part during a period between commencements of gel and hydrated solid phase formations, and then another linear part for hydrated solid phase. Foams as composites were manufactured with diluted sodium silicate binder for a density range of 0.2–0.5 g/cm 3 . One of practical milestones achieved for composite properties without reinforcement was a density of 0.3 g/cm 3 at a compressive strength of 1 MPa. Manufactured perlite/sodium silicate composites are analysed/discussed for understanding from three different perspectives i.e. manufacturing parameters (i.e. binder content, compaction pressure, and compaction ratio), properties (i.e. particle size, density, compressive strength, and modulus), and volume fractions of constituents. A rule of mixtures applicable for perlite composites for a constant compaction ratio was developed in comparison with that for particulate composites with non-compaction. It may be a basis for further development for variable compaction ratio in the future.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Innovative concrete reinforcement materials · Polymer Nanocomposites and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Le Maitre · 2002
2. Perlite-based building materials – a review of current applications10.1016/0950-0618(91)90004-5 ↗
3. Physico-chemical characterization of perlite of various origins10.1016/0167-577X(85)90008-4 ↗
4. Johnstone · 1961
5. Luongo JS. Strengthened lightweight wallboard and method and apparatus for making the same. US Patent No 6,251,979 B1. 2001.
6. The effect of moisture content on sound absorption of expanded perlite plates10.1016/j.buildenv.2004.07.004 ↗
7. Thermal conductivity of evacuated perlite at low temperatures as a function of load and load history10.1016/0011-2275(91)90183-W ↗
8. No sign of the bubble bursting – perlite uses and markets
9. Rodsky B. Building Material. US Patent No 2,858,227. 1958.
10. Gray B. Building material. US Patent No. 4,042,406. 1977.
11. Shepherd PB, Dolin RL. Lightweight building material board. US Patent No. 5,256,222. 1993.
12. Hill JH. Perlitic insulation board. US Patent No. 4,126,512. 1978.
13. Evaluation of fiber reinforced nanostructured perlite-cementitious surface compounds for building skin applications10.1016/j.conbuildmat.2008.01.010 ↗
14. Miscall J, Rahr CE. Building board of fiber and asphalt coated perlite. US Patent No 2,626,864. 1953.
15. Sherman N, Cameron JH. Method of manufacturing improved mineral board. US Patent No 4,297,311. 1981.
16. Seybold HG. Wallboard composition and method of making same. US Patent No 2,705,198. 1955.
17. Lightweight gypsum composites: design strategies for multi-functionality10.1016/j.cemconcomp.2010.09.011 ↗
18. Effect of expanded perlite aggregate on the properties of lightweight concrete10.1016/j.jmatprotec.2007.10.052 ↗
19. Density and strength characteristics of foamed gypsum10.1016/S0958-9465(00)00008-1 ↗
20. Measurements of heat transfer of multi-layered wall construction with foam gypsum10.1016/j.applthermaleng.2006.02.047 ↗
21. A new consolidation process for expanded perlite particles10.1016/j.conbuildmat.2014.02.041 ↗
22. Kim HS. Method of forming syntactic foams. US Patent No 2014/0033953 A1. 2014.
23. Syntactic foams as building materials consisting of inorganic hollow microspheres and starch binder
24. Manufacturing and failure mechanisms of syntactic foam under compression10.1016/j.compositesa.2004.03.013 ↗
25. Novel syntactic foams made of ceramic hollow microspheres and starch – theory, structure and properties10.1007/s10853-006-1091-7 ↗
26. Manufacture of syntactic foams: pre-mold processing10.1080/10426910601015857 ↗
27. Manufacture of syntactic foams using starch as binder: post-mold processing10.1080/10426910802413661 ↗
28. Pre-mould processing technique for syntactic foams: generalised modelling, theory and experiment10.1016/j.jmatprotec.2010.12.006 ↗
29. Physical–chemical study of sodium silicate as a foundry sand binder10.1016/0001-8686(82)85031-8 ↗
30. Editorial corner – a personal view: water glass – an alternative precursor for sol-gel derived silica nanofiller in polymer composites?10.3144/expresspolymlett.2014.89 ↗