journal article·2016-07

Effects of RH-WMA additive on rheological properties of high amount reclaimed asphalt binders

Lillian Gungat, Nur Izzi Md. Yusoff, Meor Othman Hamzah

Publisher page

Abstract

Abstract Warm mix asphalt (WMA) additive enables the utilization of more reclaimed asphalt pavement (RAP) in road construction. However, variations in RAP properties complicate the characterization of the rheological properties of virgin binder when blended with reclaimed asphalt binder. This study presents the evaluation of rheological properties of reclaimed asphalt binder incorporating RH-WMA, a new wax based WMA additive. The reclaimed asphalt binders recovered from two road sources were blended at various percentages with 3% RH-WMA additive. The rheological evaluations were carried out from the viscosity and dynamic shear rheometer (DSR) test results. The results indicated that the incorporation of reclaimed asphalt binder into virgin binder increased the viscosity and stiffness, while addition of RH-WMA additive slightly reduced the viscosity and stiffness. A non-dimensional viscosity index indicated an increase in relative viscosity for every 1% reclaimed asphalt binder. The SHRP Rutting Parameter, rheological master curves and multiple stress creep and recovery (MSCR) test results showed consistency in terms of binder stiffness. An interesting finding on the elasticity improvement demonstrated by percent recovery due to the addition of RH-WMA additive in the MSCR test, indicated the possibilities of rutting improvement when utilizing RAP and RH-WMA additive.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Transport Systems and Technology

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Brock · 2007
2. Copeland · 2011
3. Hybrid life cycle assessment for asphalt mixtures with high RAP content10.1016/j.resconrec.2013.12.004 ↗
4. A review of the use of recycled solid waste materials in asphalt pavements10.1016/j.resconrec.2007.02.002 ↗
5. Zettler · Better Roads · 2006 · 76 · 16
6. Evaluation of recycled mixtures using foamed asphalt
7. Evaluation of heated reclaimed asphalt pavement material and wax-modified asphalt for use in recycled hot-mix asphalt10.3141/1998-14 ↗
8. Energy and exergy analysis in an asphalt plant’s rotary dryer10.1016/j.applthermaleng.2010.11.029 ↗
9. D’Angelo · 2008
10. Using warm-mix asphalt technology to incorporate high percentage of reclaimed asphalt pavement material in asphalt mixtures10.3141/2051-09 ↗
11. Effects of warm-mix asphalt additives on workability and mechanical properties of reclaimed asphalt pavement material10.3141/2126-18 ↗
12. Testing of moderate and high reclaimed asphalt pavement content mixes10.3141/2126-12 ↗
13. Life cycle assessment of hot mix asphalt and zeolite-based warm mix asphalt with reclaimed asphalt pavement10.1016/j.resconrec.2013.02.018 ↗
14. The influence of warm mix asphalt on binders in mixes that contain recycled asphalt materials10.1016/j.conbuildmat.2014.12.023 ↗
15. Evaluation of the rheological properties and activation energy of virgin and recovered asphalt binder blends
16. Al-Qadi · 2007
17. Evaluation of high recycled asphalt pavement content in warm mix asphalt technology
18. Evotherm Warm Mix Technology, Evotherm pavement durability: Result of Laboratory and Field Testing, 2009.
19. Investigation of the influence of warm mix asphalt additive dose on the workability, cracking susceptibility, and moisture susceptibility of asphalt mixtures containing reclaimed asphalt pavement
20. Evaluating effects of warm-mix asphalt technology additive dosages on workability and durability of asphalt mixtures containing recycled asphalt pavement
21. Evaluation of warm-mix asphalt produced with the double barrel green process10.3141/2126-03 ↗
22. Influence of test geometry, temperature, stress level, and loading duration on binder properties measured using DSR10.1061/(ASCE)MT.1943-5533.0000321 ↗
23. Sabouri · 2014
24. Characterization of warm mix asphalt binders containing artificially long-term aged binders10.1016/j.conbuildmat.2008.11.005 ↗
25. Laboratory evaluation of antioxidants for asphalt binders10.1016/j.conbuildmat.2010.06.058 ↗
26. ASTM D5 · 1997
27. ASTM D36 · 1995
28. ASTM D113 · 1999
29. ASTM D4402-02 · 2011
30. ASTM D7175-08 · 2011
31. Effect of warm mixture asphalt (WMA) additives on high failure temperature properties for crumb rubber modified (CRM) binders10.1016/j.conbuildmat.2012.04.004 ↗
32. Investigation of temperature characteristics of recycled hot mix asphalt mixtures10.1016/j.resconrec.2006.11.005 ↗
33. Standard test method for multiple stress creep and recovery (MSCR) of asphalt binder using a dynamic shear rheometer
34. Internal structure of bitumen/polymer/wax ternary mixtures for warm mix asphalts10.1002/app.39057 ↗
35. Parameters to characterise the effects of Sasobit® content on the rheological properties of unaged and aged asphalt binders10.1080/14680629.2012.668836 ↗
36. Modelling the rheological properties of bituminous binders using the 2S2P1D model10.1016/j.conbuildmat.2012.08.038 ↗
37. General “2S2P1D” model and relation between the linear viscoelastic behaviors of bituminous binders and mixes
38. Rheological characteristics of synthetic road binders10.1016/j.fuel.2008.01.012 ↗
39. Rheological properties of styrene butadiene styrene polymer modified road bitumens10.1016/S0016-2361(03)00146-7 ↗
40. Huang · 2015
41. Development of asphalt binder specifications
42. Use of black diagrams to identify inconsistencies in rheological data10.1080/14680629.2002.9689933 ↗
43. Revision of the superpave high temperature binder specification: The multiple stress creep and recovery test (With Discussion)
44. New high-temperature binder specification using multi-stress creep and recover, development in asphalt binder specifications
45. FHWA · 2011