Constitutive model for confined ultra-high strength concrete in steel tube
Source abstract
Abstract
Abstract With the development of material science and production technology, ultra-high strength concrete (UHSC) with uniaxial compressive strength up to 200 MPa has been made available commercially and used for concrete filled steel tubular (CFST) columns in high-rise buildings. Finite element analysis is a necessary tool to analyze CFST columns, but its accuracy depends on the generic constitutive model for the confined UHSC in the steel tube. This paper proposes a new constitutive model for confined UHSC based on (1) a yield criterion which is a function of hydrostatic pressure and lode angle, (2) a non-associated flow rule with a dilation angle that is a function of the confining pressure and the equivalent plastic strain, and (3) a hardening/softening rule which is dependent on the confining pressure and the equivalent plastic strain. The parameters of the proposed constitutive model are calibrated by a series of uniaxial compression, biaxial compression and triaxial compression tests of UHSC specimens. The constitutive model is then implemented in ABAQUS and verified by the test results of short CFST columns. Comparison of the test and predicted results in terms of compression load versus axial strain and lateral strain curves demonstrates that the proposed model can predict accurately the maximum resistance of the stub CFST columns as well as the interactive behavior between the steel tube and the confined concrete core.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Load-Bearing Analysis · Structural Behavior of Reinforced Concrete · Fire effects on concrete materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Ultra-high strength concrete filled composite columns for multi-storey building construction10.1260/1369-4332.15.9.1487 ↗
2. Mechanical behaviour of ultra-high strength concrete at elevated temperatures and fire resistance of ultra-high strength concrete filled steel tubes10.1016/j.matdes.2016.05.050 ↗
3. Xiong · 2012
4. Strength analysis of concrete-filled thin-walled steel box columns10.1016/0143-974X(94)90003-5 ↗
5. Nonlinear analysis of axially loaded concrete-filled tube columns with confinement effect10.1061/(ASCE)0733-9445(2003)129:10(1322) ↗
6. Behaviour of normal and high strength concrete-filled compact steel tube circular stub columns10.1016/j.jcsr.2005.11.002 ↗
7. Performance of concrete-filled thin-walled steel tubes under pure torsion10.1016/j.tws.2007.01.008 ↗
8. Numerical modelling of the axial compressive behaviour of short concrete-filled elliptical steel columns10.1016/j.jcsr.2010.02.003 ↗
9. Finite element modelling of concrete-filled steel stub columns under axial compression10.1016/j.jcsr.2013.07.001 ↗
10. Numerical modelling of concrete-filled steel box columns incorporating high strength materials10.1016/j.jcsr.2014.07.014 ↗
11. Experimental study of ultra-high-strength concrete under triaxial compression
12. Behaviour and design of composite columns incorporating compact high-strength steel plates10.1016/j.jcsr.2015.01.005 ↗
13. Finite element modeling of confined concrete-I: Drucker-Prager type plasticity model10.1016/j.engstruct.2009.11.014 ↗
14. Finite element modeling of confined concrete-II: plastic-damage model10.1016/j.engstruct.2009.11.013 ↗
15. Lateral strain-to-axial strain relationship of confined concrete
16. Richart · 1928
17. Behavior of concrete under biaxial stresses
18. Behavior of steel fiber reinforced concrete in multiaxial loading
19. Experimental study of plain concrete under triaxial stress
20. Study of the behavior of concrete under triaxial compression
21. Mechanical properties of three high-strength concretes containing silica fume
22. Stress-strain relationship of confined and unconfined concrete
23. Complete triaxial stress-strain curves of high-strength concrete10.1061/(ASCE)0899-1561(2001)13:3(209) ↗
24. High-strength concrete subjected to triaxial compression
25. High-strength concrete in triaxial compression by different sizes of specimens
26. Stress–strain model for normal- and light-weight concretes under uniaxial and triaxial compression10.1016/j.conbuildmat.2014.08.050 ↗
27. Compressive behavior of ultra-high-performance fiber-reinforced concrete
28. Development of direct tension test method for ultra-high-performance fiber-reinforced concrete
29. Ultra high performance concrete under biaxial compression
30. Structural behaviour of UHPC under tensile stress and biaxial loading
31. ABAQUS Theory Manual USA: Hibbitt, Karlsson & Sorensen Inc.
32. CEN. Eurocode 3: Design of steel structures, Part 1–1: General rules and rules for buildings, EN 1993-1-1. Brussels: European Committee for Standardization, 2005.