journal article·2017-03

The correlation between porosity and mechanical properties of multicomponent systems consisting of Portland cement–slag–silica fume–metakaolin

Eva Kuzielová, Matúš Žemlička, Eva Bartoničková, Martin T. Palou

Publisher page

Abstract

Abstract Pore structure and mechanical strength of quaternary systems consisting of ordinary Portland cement (PC) replaced in 25, 30 and 35 wt% by ground granulated blast-furnace slag (BFS), silica fume (SF) and metakaolin (MK) were evaluated up to 365 days. Refinement of the structure as a result of cement supplementary materials (SCMs) demonstrated mainly by the rise of gel pores portion, whereas the portion of middle capillary pores decreased. Despite dilution effect in blended samples, both the compressive (CS) and flexural strength (FS) increased throughout all the curing time and reached the values higher than that of referential sample. Development of strength in time reflected different activity of SCMs. The highest values of strength corresponding to the lowest total porosities were determined in the samples containing the most SF (CS = 125 MPa, FS = 18 MPa after 365 days), whilst the highest amount of BFS together with the highest substitution level led to the lowest strengths among blended samples (CS = 99 MPa, FS = 15 MPa).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Magnesium Oxide Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Property improvement of Portland cement by incorporating with metakaolin and slag10.1016/S0008-8846(02)01025-6 ↗
2. Metakaolin as a pozzolanic microfiller for high-performance mortars10.1016/S0008-8846(98)00045-3 ↗
3. Effect of high temperature on the properties of ternary blended cement pastes and mortars10.1007/s10973-015-4817-4 ↗
4. Thermal analysis of blended cements10.1007/s10973-015-4569-1 ↗
5. Selection of superplasticizer for high performance concrete
6. Study on optimization of hydration process of blended cement10.1007/s10973-011-1531-8 ↗
7. Maekawa · 1999
8. Mindess · 2003
9. Mehta · 1993
10. Effect of fineness on the properties of cement paste
11. The theoretic analysis of the influence of the particle size distribution of cement system on the property of cement10.1016/S0008-8846(99)00148-9 ↗
12. Effect of curing on the compressive strength, resistance to chloride-ion penetration and porosity of concretes incorporating slag, fly ash or silica fume10.1016/0958-9465(95)00005-W ↗
13. Rate of pozzolanic reaction of metakaolin in high-performance cement pastes10.1016/S0008-8846(01)00581-6 ↗
14. Li · 2011
15. Strength and pore structure of ternary blended cement mortars containing blast furnace slag and silica fume10.1016/S0008-8846(98)00078-7 ↗
16. Relative strength, pozzolanic activity and cement hydration in superplasticised metakaolin concrete10.1016/0008-8846(96)00148-2 ↗
17. Study physico-chemical properties of blended cements containing fixed amount of silica fume, blast furnace slag, basalt and limestone, a comparative study10.1016/j.conbuildmat.2014.08.071 ↗
18. Effects of metakaolin on mechanical properties, pore structure and hydration heat of mortars at 0.17w/b ratio10.1016/j.conbuildmat.2015.06.036 ↗
19. Hydration of the cement paste with Na2CO3 addition
20. Long – term properties of cement composites with various metakaolinite content
21. The solid state chemistry of metakaolin-blended ordinary Portland cement10.1023/A:1004753926277 ↗
22. Pozzolanic reaction of six principal clay minerals: activation reactivity assessments and technological effects10.1016/0008-8846(95)00165-4 ↗
23. Blended cements consisting of Portland cement–slag–silica fume–metakaolin system
24. Study of hydration products in the model systems metakaolin-lime and metakaolin-lime-gypsum
25. Mercury intrusion porosimetry and hierarchical structure of cement pastes: theory and experiment10.1016/S0008-8846(99)00252-5 ↗
26. Liquid intrusion and alternative methods for the characterization of macroporous materials (IUPAC technical report)10.1351/PAC-REP-10-11-19 ↗
27. Metha · 2006
28. Study of the hydration process of quaternary blended cements and durability of the produced mortars and concretes10.1016/j.conbuildmat.2008.11.015 ↗
29. Aligizaki · 2006
30. Porosity/permeability relationships
31. An argument for using coarse cements in high performance concretes10.1016/S0008-8846(98)00201-4 ↗
32. Limestone fillers cement based composites: effects of blast furnace slags on fresh and hardened properties10.1016/j.conbuildmat.2013.10.076 ↗
33. Ternary blends containing slag and interground/blended limestone: hydration, strength, and pore structure10.1016/j.conbuildmat.2015.10.179 ↗
34. Influence of natural pozzolan, silica fume and limestone fine on strength, acid resistance and microstructure of mortar10.1016/j.powtec.2014.01.046 ↗
35. Estimation of the permeability of silica fume cement concrete10.1016/j.conbuildmat.2009.08.033 ↗
36. Chloride resistance of concrete and its binding capacity-comparison between experimental results and thermodynamic modeling10.1016/j.cemconcomp.2009.08.001 ↗
37. Evolution of pore structure in blended systems10.1016/j.cemconres.2015.02.025 ↗
38. Characterization and modeling of pores and surfaces in cement paste: correlations to processing and properties10.3151/jact.6.5 ↗
39. Properties of chemically combusted calcium carbide residue and its influence on cement properties10.3390/ma8020638 ↗
40. Strength, porosity and corrosion resistance of ternary blend Portland cement, rice husk ash and fly ash mortar10.1016/j.conbuildmat.2007.06.010 ↗
41. Concrete durability as influenced by density and/or porosity
42. Role of water-binder ratio on the strength development in mortars incorporated with silica fume10.1016/S0008-8846(00)00500-7 ↗
43. An experimental study on optimum usage of GGBS for the compressive strength of concrete10.1016/j.cemconcomp.2007.01.001 ↗
44. An experimental study on strength development of concrete containing fly ash and optimum usage of fly ash in concrete10.1016/j.cemconres.2004.09.031 ↗
45. Mechanical properties and durability of mortar and concrete containing natural pozzolana and limestone blended cements10.1016/j.cemconcomp.2007.04.009 ↗
46. Deformation and mechanical properties of quaternary blended cements containing ground granulated blast furnace slag, fly ash and magnesia10.1016/j.cemconres.2015.01.018 ↗
47. Efficient utilization of cementitious materials to produce sustainable blended cement10.1016/j.cemconcomp.2012.02.004 ↗