A Taguchi approach for investigating the engineering properties of concretes incorporating barite, colemanite, basaltic pumice and ground blast furnace slag
Source abstract
Abstract
Abstract Natural and artificial mineral additives have been frequently used for improving the physical, mechanical and durability properties of concrete in recent years. In this study four different mineral additives were used which are barite, colemanite, basaltic pumice and ground granulated blast furnace slag (BFS). Each mineral additive was used one by one and binary, ternary and quaternary combinations. Utilization of these mineral additives as fine aggregates and cement replacement material was investigated and the effect of these materials on compressive strength, splitting tensile strength, ultrasonic sound velocity, capillary water absorption and Bohme abrasion resistance were examined. The Taguchi method was also used to determine the optimum working conditions for each parameter and to reduce the number of experiments. Besides, contribution of each material on test results was also determined by ANOVA. According to the analysis, it was seen that blast furnace slag and colemanite were the two most effective parameters on results in general.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Binici · 2002
2. Utilization and efficiency of ground granulated blast furnace slag on concrete properties – a review10.1016/j.conbuildmat.2015.12.153 ↗
3. Durability of concrete incorporating non-ground blast furnace slag and bottom ash as fine aggregate10.1016/j.buildenv.2006.07.003 ↗
4. Investigation of durability properties of concrete pipes incorporating blast furnace slag and ground basaltic pumice as fine aggregates10.1016/j.scient.2012.04.007 ↗
5. Shrinkage of self compacting concrete made with blast furnace slag as fine aggregate10.1016/j.conbuildmat.2014.11.029 ↗
6. Effect of crushed ceramic and basaltic pumice as fine aggregates on mortars properties10.1016/j.conbuildmat.2006.06.002 ↗
7. Shock-absorbing capability of lightweight concrete utilizing volcanic pumice aggregate10.1016/j.conbuildmat.2015.03.019 ↗
8. The effects of different fine and coarse pumice aggregate/cement ratios on the structural concrete properties without using any admixtures10.1016/j.cemconres.2004.08.003 ↗
9. Effect of prewetting methods on some fresh and hardened properties of concrete with pumice aggregate10.1016/j.cemconcomp.2011.11.022 ↗
10. Characteristics of fired clay bricks with pumice addition10.1016/j.enbuild.2015.05.031 ↗
11. Properties of concrete with pumice powder and fly ash as cement replacement materials10.1016/j.conbuildmat.2015.03.026 ↗
12. Effect of incorporating blast furnace slag and natural pozzolana on compressive strength and capillary water absorption of concrete10.1016/j.proeng.2015.06.145 ↗
13. Effects of bottom ash and granulated blast furnace slag as fine aggregates on abrasion resistance of concrete
14. A. Durmuş, Y. Gürsoy, Comparative study of heavyweight concrete produced using one of the natural heavyweight aggregates present in the Eastern Blacksea Region with traditional concrete, in: Proceeding of the Fourth International Conference on Civil Engineering, Tehran, 1997.
15. Doğu Karadeniz Bölgesi doğal agregalarından biriyle üretilen ağır betonun başlıca özelikleri, Turkish Ready Mixed Concrete Association
16. Y. Akgün, A. Durmuş, A.Y. Durmuş, Barit Agregasıyla Üretilen Ağır Bir Betonun Özelikleri, in: 7th National Concrete Congress Book, İstanbul, 2007, pp. 465–474 (in Turkish).
17. The effect of barite rate on the physical and mechanical properties of concretes under F-T cycle10.1016/j.matdes.2008.03.013 ↗
18. A new barite-colematine concrete with lower neutron production in radiation therapy bunkers10.1016/j.anucene.2012.07.039 ↗
19. Utilization of trommel sieve waste as an additive in Portland cement production10.1016/S0008-8846(01)00625-1 ↗
20. Ross · 1996
21. A Taguchi approach for investigation of some physical properties of concrete produced from mineral admixtures10.1016/j.buildenv.2007.02.005 ↗
22. Statistical analysis for mechanical properties of polypropylene fiber reinforced lightweight concrete containing silica fume exposed to high temperature10.1016/j.matdes.2008.11.032 ↗
23. Yalçın · 1996
24. An investigation on the concrete properties containing colemanite
25. 2016
26. DIN 52108: Testing of Inorganic Non-metallic Materials – Wear Test Using the Grinding Wheel According to Böhme – Grinding Wheel Method, München, 2010.
27. 2010
28. 2010
29. 2016
30. 2010
31. 2010
32. Correlation between the mechanical behaviour and the ultrasonic velocity of fiber-reinforced concrete10.1016/j.conbuildmat.2015.10.047 ↗
33. 2011
34. Optimization of culture condition for growth and phenol degradation by Alcaligenes faecalis JF339228 using Taguchi Methodology10.1080/19443994.2012.749021 ↗
35. Sevinc · 2011
36. Gamma-ray shielding properties of concrete including barite at different energies10.1016/j.pnucene.2010.04.006 ↗
37. Influence of colemanite admixture on Portland cement durability10.1680/adcr.10.00043 ↗
38. Turkish General Directorate of State Hydraulic Works Technical Bulletin Issue 105, Ankara, 2009, pp. 1–23 (in Turkish).
39. Erdogan · 2013
40. Strengthening effect of finely ground fly ash, granulated blast furnace granulated blast furnace slag (GBFS), and their combination10.1016/S0008-8846(98)00158-6 ↗