journal article·2017-07

Effect of embedment length on pullout behavior of amorphous steel fiber in Portland cement composites

Baek-Joong Kim, Chongku Yi, Yu-ri Ahn

Publisher page

Abstract

Abstract For using amorphous steel fibers (ASF) in Portland cement composites, the performance of ASF was evaluated by a pullout test and compared to that of a hooked-end steel fiber (HSF). The embedment length of the fiber (5.0, 8.0, and 12.5 mm), compressive strength of the mortar, and number of fibers were considered the test variables. The results showed that a single ASF had a greater maximum applied load (Pmax) than a single HSF; however, at a mortar compressive strength of 30–42 MPa, its bond strength (τmax) and pullout energy (Ef) decreased by 40.9–55.8% and 16.9–79.7%, respectively, compared to those of a single HSF. Furthermore, in the pullout failure mode, the Ef of 4 ASFs, which have a volume fraction equivalent to a single HSF, was 2.10–3.04 times higher than that of a single HSF. Based on the Ef of ASFs, an embedment length of 5–8 mm is recommended to provide the most effective ASF reinforcement effect to a mortar with a compressive strength of up to 40 MPa.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Natural Fiber Reinforced Composites · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. The durability characteristics of high performance concrete: a review10.1016/S0958-9465(02)00081-1 ↗
2. Shear domain of fibre-reinforced high-strength concrete beams10.1016/S0141-0296(96)00150-2 ↗
3. Cracking behavior in reinforced concrete members with steel fibers: a comprehensive experimental study10.1016/j.cemconres.2014.10.011 ↗
4. Pull-out mechanism in steel fiber-reinforced concrete10.1061/JSDEAG.0004409 ↗
5. Fiber-matrix interaction in microfiber-reinforced mortar10.1016/1065-7355(95)90025-X ↗
6. A comparative evaluation of concrete reinforced with straight steel fibers and fibers with deformed ends glued together into bundles
7. Concrete reinforced with deformed steel fibers part II: toughness characterization
8. Mix design and mechanical behaviour of some steel-fibre-reinforced concretes used in reinforced concrete structures10.1007/BF02472199 ↗
9. Effect of silica fume on steel fiber bond characteristics in reactive powder concrete10.1016/j.cemconres.2003.12.023 ↗
10. Effect of inclining angle, bundling and surface treatment on synthetic fibre pull-out from a cement matrix10.1016/0010-4361(90)90005-H ↗
11. Treatments of polypropylene fibres to optimize their reinforcing efficiency in cement composites10.1016/0958-9465(92)90026-R ↗
12. Properties of steel fiber and polyethylene fiber hybrid reinforced polymer-modified concrete
13. N. Banthia, J. Sheng, Micro-Reinforced Cementitious Materials, MRS Online Proceedings Library, 1990, 211, null-null.10.1557/PROC-211-25 ↗
14. On flow properties, fibre distribution, fibre orientation and flexural behaviour of FRC10.1617/s11527-007-9229-x ↗
15. Model for predicting the elastic strain of fiber reinforced composites containing high volume fractions of discontinuous fibers
16. Durability of steel fiber reinforced self-compacting concrete10.1016/j.conbuildmat.2015.01.061 ↗
17. Corrosion of steel fibre reinforced concrete from the cracks10.1016/j.cemconres.2004.06.032 ↗
18. Flexural behaviour of amorphous micro-steel fibre-reinforced cement composites10.1016/j.compstruct.2011.11.031 ↗
19. Shrinkage and corrosion resistance of amorphous metallic-fiber-reinforced cement composites10.1016/j.compstruct.2013.08.010 ↗
20. Bonding properties of amorphous micro-steel fibre-reinforced cementitious composites10.1016/j.compstruct.2013.02.015 ↗