Crushing characteristics of a recycled aggregate from waste concrete
Source abstract
Abstract
Abstract A single-particle crushing test was carried out for more than 170 recycled aggregates from waste concrete. Recycled aggregates were sieved into 30- and 40-mm particle size groups, mainly consisting of mortar with 2–10 natural aggregates. At the initial loading of the single aggregate, its irregular surface was close to the loading plate, which eventually crushed it. This first crushing stage is called surface crushing. With further loading, the surface mortar was crushed, and it separated from the aggregate; this process was repeated several times and is called mortar crushing. The natural aggregate was crushed, following several mortar crushing stages, where the load suddenly decreased by more than 50%; this stage is called natural aggregate crushing. As the loading continued, this three-stage crushing cycle was repeated owing to several natural aggregates. The stresses at the initial crack due to the initial natural aggregate crushing and at the peak state seemed to weakly related to the mortar ratio (mass of mortar within each aggregate) and absorption ratio (mass difference before and after soaking). As the number of natural aggregates within each recycled aggregate increased, both stresses slightly increased.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycled Aggregate Concrete Performance · Innovative concrete reinforcement materials · Geotechnical Engineering and Soil Stabilization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. ASTM C127 · 2015
2. ASTM C496 · 2004
3. Effect of particle breakage on compaction and thermal resistivity of concrete-based recycled aggregates10.7843/kgs.2015.31.10.17 ↗
4. Kim · 2016
5. Kim · 2014
6. Strength development of the concrete incorporating blast furnace slag and recycled aggregate as alkali activator
7. Study on the reinforced retaining wall using the backfill of recycled aggregate
8. Effect of the amount of attached mortar of recycled aggregates on the properties of concrete
9. A study on utilization of recycled aggregates as lateral drain for soft ground improvement10.7843/kgs.2011.27.10.005 ↗
10. Chloride diffusivity of concrete using recycled aggregate by strength levels
11. A study on the optimization of recycled aggregate alkalinity reducing facility in the field
12. Ministry of Land, Infrastructure and Transport of Korea, Quality Standards for Recycled Aggregate, 2013.
13. One-dimensional compression behaviour of uniformly graded sand related to single particle crushing strength10.3208/sandf.41.2_39 ↗
14. Installation resistance test for the reinforced materials with compaction of recycled aggregate
15. Structural Performance Evaluation of Steel Fiber-Reinforced Concrete Beams with Recycled Coarse Aggregates10.4334/JKCI.2015.27.3.215 ↗
16. A study on the ph characteristic of recycle aggregate according to test methods and elapsed time
17. Evaluation of compaction and thermal characteristics of recycled aggregates for backfilling power transmission pipelines10.7843/kgs.2011.27.7.017 ↗
18. Shear strength characteristics of recycled-aggregate porous concrete pile for soft ground improvement
19. An investigation of single sand particle fracture using X-ray micro-tomography10.1680/geot.4.P.157 ↗
20. B. Zhao, C.Y.D. Chow, J. Wang, An Investigation of Single Particle Crushing Tests on Irregular-Shaped Quartz Sand with DEM, Proceedings of the 7th International Conference on Discrete Element Methods, 2016, pp. 217–224.10.1007/978-981-10-1926-5_25 ↗