journal article·2018-04Open access

The effects of dosage and production process on the mechanical and physical properties of natural hydraulic lime mortars

Lucía Garijo, XiaoXin Zhang, Gonzalo Ruiz, José Joaquín Ortega, Zhimin Wu

Abstract

Natural Hydraulic Lime (NHL) mortars are well-extended in restoration works presently. However, there is still a lack of standardization on their dosage methodology. Thus, seven types of mortar were fabricated and five factors which have an influence on their properties have been studied, in particular the water-binder ratio, the mold material, the aggregate size and type and the different curing conditions. Furthermore, an advanced mechanical characterization has been performed on these mortars, including the measurement of the fracture energy. Finally, some empirical equations for determining the relationships between these mechanical properties were proposed, which could be helpful when simulating the numerical models of historical constructions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Building materials and conservation · Conservation Techniques and Studies · 3D Surveying and Cultural Heritage

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Masonry repair lime-based mortars: factors affecting the mechanical behavior10.1016/S0008-8846(03)00210-2 ↗
2. Lime mortars for the conservation of historic buildings10.1179/sic.2002.47.1.62 ↗
3. Experimental testing of the durability of lime-based mortars used for rendering historic buildings10.1016/j.conbuildmat.2011.10.059 ↗
4. Natural hydraulic lime versus cement for blended lime mortars for restoration works10.1016/j.conbuildmat.2015.06.058 ↗
5. B. Bails, Diccionario de Arquitectura Civil. Obra póstuma Madrid, Spain: Colegio de Aparejadores y Arquitectos Técnicos de Asturias, Oviedo, 1973
6. J.R. Rosell, Algunas consideraciones de la cal y sus morteros. II Jornadas FICAL. 2011:6-16.
7. Advanced Byzantine cement based composites resisting earthquake stresses: the crushed brick/lime mortars of Justinian's Hagia Sophia10.1016/S0950-0618(02)00005-3 ↗
8. Physical and chemical assessment of lime-metakaolin mortars: influence of binder:aggregate ratio10.1016/j.cemconcomp.2013.06.010 ↗
9. The effect of aggregate size and type of binder on microstructure and mechanical properties of NHL mortars10.1016/j.conbuildmat.2013.11.111 ↗
10. Mechanical properties of natural hydraulic lime-based mortars10.1016/j.cemconres.2004.02.005 ↗
11. Strength-porosity relationships in lime-pozzolan mortars10.1016/j.conbuildmat.2005.02.012 ↗
12. Effect of water binder ratio on the early hydration of natural hydraulic lime10.1617/s11527-014-0410-8 ↗
13. Study of the mechanical behavior of masonry repair lime-based mortars cured and exposed under different conditions10.1016/j.cemconres.2005.12.003 ↗
14. Mechanical and mineralogical properties of natural hydraulic lime-metakaolin mortars in different curing conditions10.1016/j.conbuildmat.2013.10.045 ↗
15. New natural hydraulic lime mortars – Physical and microstructural properties in different curing conditions10.1016/j.conbuildmat.2013.12.078 ↗
16. Advanced mechanical characterization of NHL mortars and cohesive simulation of their failure behavior10.1016/j.conbuildmat.2017.07.127 ↗
17. FIB Model Code 2010, Final Draft. Lausanne, Switzerland: FIB-Fédération Internationale du Béton, 2012. p. 311.
18. ACI 318-14. Building Code Requirements for Structural Concrete and Commentary. Farmington Hills: American Concrete Institute, 2014. p. 520.
19. BS EN 459-1. Building lime – Part 1: Definitions, specifications and conformity criteria. Brussels, Belgium: BSI, 2015. p. 52.
20. BS EN 1015-1. Methods of test for mortar for masonry – Part 1: Determination of particle size distribution (by sieve analysis): BSI; 1998/A1:2006. p. 8.
21. BS EN 1097-6. Test for mechanical and physical properties of aggregates Part 6: Determination of particle density and water absorption: BSI, 2013. p. 54.
22. BS EN 1097-3. Test for mechanical and physical properties of aggregates Part 3: Determination of loose bulk density and voids: BSI, 1998. p. 10.
23. BS EN 1015-3. Methods of test for mortar for masonry – Part 3: Determination of consistence of fresh mortar (by flow table): BSI; 1999/A2:2006. p. 10.
24. BS EN 1015-6. Methods of test for mortar for masonry – Part 6: Determination of bulk density of fresh mortar: BSI; 1998/A1:2006. p. 8.
25. BS EN 1015-11. Methods of test for mortar for masonry – Part 11: Determination of flexural and compressive strength of hardened mortar: BSI; 1999/A1:2006. p. 12.
26. BS EN 1015-2. Methods of test for mortar for masonry – Part 2: Bulk sampling of mortars and preparation of test mortars: BSI; 1998/A1:2006. p. 8.
27. BS EN 459-2. Building lime – Part 2: Test methods: BSI, 2010. p. 68.
28. BS EN 12390-13. Testing hardened concrete Part 13: Determination of secant modulus of elasticity in compression: BSI, 2012. p. 10.
29. 50-FMC. Determination of the fracture energy of mortar and concrete by means of the three-point bend tests on notched beams
30. Measurement of the fracture energy using three point bend tests. 3. Influence of cutting the P-δ tail10.1007/BF02472591 ↗
31. Measurement of the fracture energy using three point bend tests. 1. Influence of experimental procedures10.1007/BF02472591 ↗
32. Measurement of the fracture energy using three point bend tests. 2. Influence of bulk energy dissipation10.1007/BF02472671 ↗
33. On the measurement of concrete fracture energy using three-point bend tests10.1007/BF02480689 ↗
34. Fracture behaviour of high-strength concrete at a wide range of loading rates10.1016/j.ijimpeng.2009.04.007 ↗
35. Stress intensity factor, compliance and CMOD for a general three-point-bend beam10.1023/A:1007498132504 ↗
36. RILEM TC89-FMT. Determination of fracture parameters (KIcs and CTODc) of plain concrete using three-point bend tests. Mater. Struct. 1991;23:457-60.10.1007/BF02472029 ↗
37. BS EN 12390-6. Testing hardened concrete – Part 6: Tensile splitting strength of test specimens: BSI, 2009. p. 14.
38. Size effect and boundary conditions in the Brazilian test: theoretical analysis10.1007/BF02482715 ↗
39. Study of mechanical characterization of ceramic specimens from a Brazilian test adaptation10.3989/mc.2011.55809 ↗
40. Size effect and boundary conditions in the Brazilian test: experimental verification10.1007/BF02481517 ↗
41. Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements10.1016/0008-8846(76)90007-7 ↗
42. Commercial NHL-containing mortars for the preservation of historical architecture. Part 1: Compositional and mechanical characterisation10.1016/j.conbuildmat.2012.08.029 ↗
43. UNE 83980. Concrete durability Test methods Determination of the water absorption, density and accessible porosity for water in concrete. Madrid: AENOR, 2014. p. 8.
44. Methods for porosity measurement in lime-based mortars10.1016/j.conbuildmat.2010.05.019 ↗
45. BS EN 1015-18. Methods of test for mortar for masonry – Part 18: Determination of water absorption coefficient due to capillary action of hardened mortar: BSI, 2002. p. 12.
46. Compressive strength and elasticity of pure lime mortar masonry10.1617/s11527-015-0553-2 ↗
47. Hydraulic lime mortars for the restoration of historic masonry in Crete10.1016/j.cemconres.2004.09.001 ↗
48. Shape and size effects on the compressive strength of high-strength concrete10.1016/j.cemconres.2007.09.020 ↗
49. Influence of aggregates grading and water/cement ratio in workability and hardened properties of mortars10.1016/j.conbuildmat.2010.11.011 ↗
50. Influence of natural hydraulic lime content on the properties of aerial lime-based mortars10.1016/j.conbuildmat.2014.09.010 ↗
51. Transport of fluids in cement-rubber composites10.1016/S0958-9465(02)00119-1 ↗
52. Capillary transport in mortars and concrete10.1016/S0008-8846(97)00052-5 ↗
53. Pore-related properties of natural hydraulic lime mortars: an experimental study10.1617/s11527-015-0684-5 ↗
54. Rate effect on the mechanical properties of eight types of high-strength concrete and comparison with FIB MC201010.1016/j.conbuildmat.2011.11.037 ↗