Shear behaviour of a cement grout tested in the direct shear test
Source abstract
Abstract
Abstract Portland cement grouts are widely used in the mining industry to bond cable bolts with the surrounding rockmass. Numerous laboratory and field tests showed that bond failure of the cable/grout interface is the dominant failure mode. Previous research has found that shear behaviour of the grout along a pre-defined plane plays a significant role in determining the nature of the bond failure in a cable bolt reinforcement system. In this study, the shear behaviour of a Portland cement grout was investigated based on a direct shear test. Two different boundary conditions were considered being a constant normal load (CNL) and constant normal stiffness (CNS). Under CNL condition, five different normal pressures between 0.1 MPa and 6.0 MPa were examined. While under CNS condition, the initial normal pressure was set to value within the same range. Also, a CNS of 10 kN/m was added. The cohesion, internal friction angle and shear strength of the grout were acquired. The results showed that there is a linear relationship between the shear strength of the grout and resultant normal pressure. However, under the CNS condition, the shear strength of the grout was found to be generally higher comparing to the CNL condition, most likely because sample dilation resulted in an increase in the normal pressure. Consequently, shear strength of the grout also increased.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Geotechnical Engineering and Underground Structures · Rock Mechanics and Modeling · Grouting, Rheology, and Soil Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Hutchinson · 1996
2. Rock reinforcement systems10.1016/S1365-1609(97)80004-4 ↗
3. An experimental procedure for the in situ testing of cable bolts10.1016/0148-9062(92)92635-P ↗
4. Blanco · 2012
5. The load transfer properties of post-groutable cable bolts used in the Australian Coal Industry
6. Sample diameter effect on bonding capacity of fully grouted cable bolts10.1016/j.tust.2017.06.004 ↗
7. Visualization of failure in a pull-out test of cable bolts using X-ray CT10.1016/S0950-0618(00)00075-1 ↗
8. Load transfer behaviour of fully grouted cable bolts reinforced in weak rocks under tensile loading conditions10.1520/GTJ20150096 ↗
9. Bond strength of grouted cable bolts10.1016/0148-9062(92)93661-3 ↗
10. A constitutive model for load-displacement performance of modified cable bolts10.1016/j.tust.2017.05.025 ↗
11. An analytical model of fully grouted rock bolts subjected to tensile load10.1016/j.conbuildmat.2013.08.084 ↗
12. Simulation of fully grouted rockbolts in underground roadways using FLAC2D
13. Analytical model for rock bolts reaching free end slip10.1016/j.conbuildmat.2014.01.057 ↗
14. Numerical modelling of failure propagation in fully grouted rock bolts subjected to tensile load10.1016/j.ijrmms.2014.07.007 ↗
15. Numerical modeling of fully grouted rockbolts reaching free-end slip
16. A numerical model of fully grouted bolts considering the tri-linear shear bond-slip model10.1016/j.tust.2016.01.033 ↗
17. Bond characteristics of fully grouted rockbolts10.1520/GTJ20160239 ↗
18. An analytical model for fully grouted rockbolts with consideration of the pre- and post-yielding behavior
19. Moosavi · 1997
20. Microstructure and strength of hydrated cement10.1016/0008-8846(76)90102-2 ↗
21. Development of mechanical properties of ordinary Portland and Oilwell B cement grouts10.1680/macr.1986.38.136.129 ↗
22. Physical and mechanical properties of normal Portland cement pertaining to fully grouted cable bolts
23. A study on mechanical and pressure-sensitive properties of cement mortar with nonophase materials10.1016/j.cemconres.2003.08.025 ↗
24. Mechanical properties of cementitious grout serving in fully grouted cable bolting systems
25. Reichert · 1991
26. The effect of rock mass confinement on the bond strength of fully grouted cable bolts10.1016/0148-9062(92)92634-O ↗
27. Shear strength of Portland cement grout10.1016/S0958-9465(02)00101-4 ↗
28. An analytical model of the load transfer behavior of fully grouted cable bolts10.1016/j.conbuildmat.2015.10.099 ↗
29. The next generation of cable bolts for improved ground support
30. Satola · 2007
31. Mechanics of load transfer from steel tendons to cement based grout
32. Laboratory evaluation of cable bolt supports (in two parts) 2
33. A versatile grouted cable bolt dowel reinforcing system for rock
34. Chen · 2016
35. Shear strength components of concrete under direct shearing10.1016/j.cemconres.2007.02.021 ↗
36. Behaviour of concrete under shear and normal stresses10.1680/macr.2003.55.4.367 ↗
37. ISRM, Suggested methods for determining shear strength, 2007, p. 171–3.
38. A numerical study on dilation of a saw-toothed rock joint under direct shear10.1007/s00603-016-1142-6 ↗