Bender element measurement of small strain shear modulus of cement-treated marine clay – Effect of test setup and methodology
Source abstract
Abstract
Abstract This paper examines the effect of experimental methodology on the measurement of small strain shear modulus of cement-treated marine clay using bender element. The specimens tested have cement content ranging from 20% to 50%, this being the typical range of cement content used for ground improvement in relation to underground construction. The experimental aspects studied include specimen set-up, travel time identification, excitation frequency and specimen size effects. The results indicate that, where a pre-made slot is used for the bender element, infilling the slot with an appropriate material will help to enhance probe-soil contact, reduce the sensitivity of the measurements to slot size accuracy and ensure consistency in received signal. Both the first arrival and first peak approaches for travel time determination are found to be sensitive to the system. The conventional cross-correlation method was also found to give erroneous measurements when the second peak is higher than the first. A modified cross-correlation method with window control is proposed which works well with both bender element systems studied. The source frequency used should also be higher than 3 kHz and the wave path length to wave length ratio should be larger than about 0.73. Finally aspect ratio of much higher 2 may also lead to erroneous measurements and should be avoided.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Geotechnical Engineering and Soil Mechanics · Geotechnical Engineering and Underground Structures · Geotechnical Engineering and Soil Stabilization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. On the performance of bender elements in triaxial tests10.1680/geot.7.00086 ↗
2. Source near-field effects and pulse tests in soil samples10.1680/geot.2003.53.3.337 ↗
3. Effects of sample size on bender-based axial G0 measurements10.1680/geot.2006.56.1.39 ↗
4. Shear wave measurements using bender elements in argillaceous rocks10.1520/GTJ102872 ↗
5. Analysis of bender element tests10.1520/GTJ10750J ↗
6. ASTM D2845-08, Standard Test Method for Laboratory Determination of Pulse Velocities and Ultrasonic Elastic Constants of Rock (Withdrawn 2017), ASTM International, West Conshohocken, PA, 2008, www.astm.org. doi: 10.1520/D2845-08.10.1520/D2845-08 ↗
7. Small-strain shear modulus of cement-admixed kaolinite10.1007/s10706-011-9458-1 ↗
8. Measurement of shear waves in laboratory specimens by means of piezoelectric transducers10.1520/GTJ10716J ↗
9. Measurement of low-strain material damping and wave velocity with bender elements in the frequency domain10.1139/t98-058 ↗
10. Variation of shear wave arrival time in unconfined soil specimens measured with bender elements
11. Effect of bender element installation in clay samples10.1680/geot.7.00135 ↗
12. The measurement of vertical shear-wave velocity using side-mounted bender elements in the triaxial apparatus10.1680/geot.2004.54.7.495 ↗
13. Parameters controlling stiffness and strength of artificially cemented soils10.1680/geot.8.P.084 ↗
14. R. Dyvik, C. Madshus, “Lab measurements of Gmax using bender elements, in: Proceedings of the conference on the advances in the art of testing soil under cyclic conditions.” ASCE Geotechnical Engineering Division, New York, (1985) pp 186–196.
15. Comparison of Simultaneous Bender Elements and Resonant Column Tests on Porto Residual Soil
16. Determination of small-strain stiffness of hard soils by means of bender elements and accelerometers10.1007/s10706-013-9678-7 ↗
17. Small-strain shear modulus and strength increase of cement-treated clay10.1520/GTJ102354 ↗
18. A framework interpreting bender element tests, combining time-domain and frequency-domain methods10.1520/GTJ100974 ↗
19. Grouting improvement of foundation soils
20. Laboratory measurements of small strain properties of dry sands by bender element10.1016/j.sandf.2013.08.011 ↗
21. Influence of cyclic loading history on small strain shear modulus of saturated clays10.1016/j.soildyn.2014.06.027 ↗
22. Objective criteria for determining G max from bender element tests10.1680/geot.1996.46.2.357 ↗
23. Interpretation of bender element tests-discussion10.1680/geot.1997.47.4.873 ↗
24. T. Kawaguchi, T. Mitachi, S. Shibuya, Evaluation of shear wave travel time in laboratory bender element test, in: Proceedings of the 15th. International Conference on Soil mechanics and Geotechnical Engineering (ICSMGE), 1 (2001) 155–158.
25. S. Lambert, F.R. Lacoste, A.L. Kouby, Soil-cement columns, an alternative soil improvement method, in: Proc., International Symposium on Ground Improvement IS-GI, Brussels, (2012).
26. Bender elements: performance and signal interpretation10.1061/(ASCE)1090-0241(2005)131:9(1063) ↗
27. Measuring shear wave velocity using bender elements10.1520/GTJ12196 ↗
28. Measuring shear and compression wave velocities of soil using bender-extender elements10.1139/T09-026 ↗
29. A novel bender/extender for soil testing10.1680/geot.2001.51.8.713 ↗
30. S. Melentijevics, J.L. Arcos, C. Oteo, Application of cement deep mixing method for underpinning, in: Proceedings of the 18th International Conference on Soil Mechanics and Geotechnical Engineering, 2549-2552, Paris, (2013).
31. Horizontally mounted bender elements for measuring anisotropic shear moduli in triaxial clay specimens10.1520/GTJ11333J ↗
32. A. Porbaha, F. Ghaheri, A.J. Puppala, Soil cement properties from borehole geophysics correlated with laboratory tests, in: Proceedings of the international conference on deep mixing best practice and recent advances. Stockholm, Sweden, vol. 1 (2005) pp. 605–611.
33. Sanchez-Salinero · 1986
34. Interpretation of bender element tests-discussion10.1680/geot.1997.47.4.873 ↗
35. Frequency-domain method in bender-element testing
36. Engineering behavior of cement-treated bangkok soft clay
37. A framework interpreting bender element tests, combining time-domain and frequency-domain methods10.1520/GTJ100974 ↗
38. Measurement and interpretation of the small strain stiffness of Bostanj silty sand
39. Interpretation of bender element tests10.1680/geot.1995.45.1.149 ↗
40. Evaluating the stiffness of chemically stabilized marine clay10.1080/1064119X.2016.1219891 ↗
41. An energy-based isotropic compression relation for cement-admixed soft clay10.1680/geot.13.T.019 ↗
42. Yielding of cement-treated marine clay10.1016/j.sandf.2014.04.021 ↗
43. Engineering properties of marine clay admixed with Portland cement and blended cement with siliceous fly ash10.1061/(ASCE)MT.1943-5533.0002014 ↗
44. Effectiveness study for fly ash cement improved marine clay10.1016/j.conbuildmat.2017.09.070 ↗
45. Bounding surface cam-clay model with cohesion for cement-admixed clay10.1061/(ASCE)GM.1943-5622.0000671 ↗
46. Interpretation of international parallel test on measurement of Gmax using bender elements10.3208/sandf.49.631 ↗