Effect of lithium salt and nano nucleating agent on early hydration of cement based materials
Source abstract
Abstract
Abstract The purpose of this paper is to study the effects of lithium salt and nano nucleating agent on the properties of cement-based materials, including early hydration, early strength and long-term strength of cement-based materials. The results were as follows: There is a large increase of lithium to cement early hydration, lithium sulfate effect on early hydration of cement than lithium nitrate. Lithium content of 0.3‰ can be very good to promote the early hydration of cement to improve the early strength. nano nucleating agent can significantly improve the early hydration of cement, and the rate of hydration of cement will increase with the increase of the content of nano nucleating agent. However, with the addition of nano nucleating agent, the slurry becomes thick, so adding proper amount of early strength water reducing agent can increase the fluidity of the slurry and improve the performance of the slurry.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovations in Concrete and Construction Materials · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Analysis of stakeholder relationships in the industry chain of industrialized building in China10.1016/j.jclepro.2017.03.094 ↗
2. Approaching industrialization of buildings and integrated construction using building information modeling10.1016/j.proeng.2016.11.655 ↗
3. Achieving energy efficiency through industrialized building system for residential buildings in Iraq10.1016/j.ijsbe.2015.02.002 ↗
4. Earth of Datça: development of pozzolanic activity with steam curing10.1016/j.conbuildmat.2017.02.069 ↗
5. Modeling heat and moisture transport in steam-cured mortar: application to AASHTO Type VI beams10.1016/j.conbuildmat.2017.05.151 ↗
6. The mechanical characteristics of steam-cured high strength concrete incorporating with lightweight aggregate10.1016/j.conbuildmat.2016.12.171 ↗
7. Efficiency of metakaolin in steam cured high strength concrete10.1016/j.conbuildmat.2017.07.006 ↗
8. Dissolution theory applied to the induction period in alite hydration10.1016/j.cemconres.2010.01.012 ↗
9. Discussion of “Dissolution theory applied to the induction period in alite hydration”10.1016/j.cemconres.2011.01.020 ↗
10. Discussion of the paper “Dissolution theory applied to the induction period in alite hydration” by P. Juilland et al., Cem. Concr. Res. 40 (2010) 831–84410.1016/j.cemconres.2011.01.019 ↗
11. Reply to the discussion by E. Gartner of the paper “Dissolution theory applied to the induction period in alite hydration”10.1016/j.cemconres.2011.01.018 ↗
12. Reply to the discussion by J. Makar, J.J. Beaudoin, T. Sato, R. Alizadeh and L. Raki of “Dissolution theory applied to the induction period in alite hydration”10.1016/j.cemconres.2011.01.021 ↗
13. Nanodiamond as an efficient nucleating agent for polyphenylene sulfide10.1016/j.tca.2014.03.017 ↗
14. Preparation and characteristics of nano-CaCO3 supported β-nucleating agent of polypropylene10.1016/j.eurpolymj.2008.04.022 ↗
15. Effect of nano-scaled styrene butadiene rubber based nucleating agent on the thermal, crystallization and physical properties of isotactic polypropylene10.1016/j.jallcom.2013.08.019 ↗