journal article·2018-07

Hygrothermal performance of natural bamboo fiber and bamboo charcoal as local construction infills in building envelope

Zujian Huang, Yimin Sun, Florian Musso

Publisher page

Abstract

Abstract Natural bamboo fiber (BF) and bamboo charcoal (BC) resources are available in tropical and subtropical regions in which bamboo forests are widely distributed and exhibit the potential to act as sustainable local building materials. In this study, a hygrothermal properties test and a building component and enclosed space simulation were performed to determine the adaptability of applying BF and BC as construction infills in building envelopes with local climate and building conditions. Hygrothermal properties test results indicated that the relation between BF hygrothermal properties and ambient relative humidity could be generally defined with exponential equations. Both the moisture storage and transport properties of the BC increased when compared with those of uncarbonized bamboo panels. Hygrothermal performance simulation results indicated that the BC arranged in the upstream side of the moisture flow improved the hygric performance of the BF layer, weakened the moisture and heat flow through exterior walls, improved the indoor hygrothermal environment, and reduced the HVAC demand. The application of BF and BC as local building materials was beneficial for both bamboo resources utilization and the building physical performance improvements in the bamboo producing area.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bamboo properties and applications · Natural Fiber Reinforced Composites · Hygrothermal properties of building materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. Research and utilization status of natural bamboo fiber10.4028/www.scientific.net/AMR.159.236 ↗
2. Cai · 2004
3. Structures of natural bamboo fiber for textiles
4. Extraction and preparation of bamboo fibre-reinforced composites10.1016/j.matdes.2014.06.058 ↗
5. Bamboo fibre reinforced biocomposites: a review10.1016/j.matdes.2012.06.015 ↗
6. Research of nature bamboo fiber microstructure and aggregation state structure
7. Study on hygroscopic properties of bamboo fiber
8. C.M. Zhao, Research on Performance of Natural Bamboo Fiber and Product Development, Thesis (MSc), Dong Hua University, (in Chinese), 2010.
9. O.H. López, Bamboo: The Gift of the Gods. Bogotá, Colombia, O. Hidalgo-Lopez, 2003.
10. Liese · 1998
11. Enhanced the weatherability of bamboo fiber-based outdoor building decoration materials by rutile nano-tio 210.1016/j.conbuildmat.2016.03.166 ↗
12. On the application of bamboo fiber in home furnishing design10.4028/www.scientific.net/AMR.460.244 ↗
13. W.B. Yao, W.P. Yu, W. Zhang, A hemp production process shaped bamboo fiber. CN, CN 102206873 B. (in Chinese), 2014.
14. Research on Manufacturing Technology and Application of Natural Bamboo Fibre
15. S.Y. Wei, One kind of bamboo fiber building insulation materials. CN, CN 103553423 A. (in Chinese), 2014
16. D. Grosser, Beitrag zur Histologie und Klassifikation asiatischer Bambusarten. Dissertation (PhD), Kommissionsverlag Buchhandlung Max Wiedebusch Hamburg, 1971.
17. Nanoscale structural and mechanical characterization of the cell wall of bamboo fibers10.1016/j.msec.2008.11.007 ↗
18. Assessment of the tensile properties of coir, bamboo and jute fibre10.1016/j.compositesa.2010.01.005 ↗
19. R.J. Murphy, A. Norton, Life cycle assessments of natural fibre insulation materials. National Non, 2008.
20. A review on the properties of cellulose fibre insulation10.1016/j.buildenv.2015.09.031 ↗
21. Development and performance evaluation of a new thermal insulation material from rice straw using high frequency hot-pressing10.1016/j.enbuild.2014.11.026 ↗
22. On thermal characteristics and microstructure of a new insulation material extracted from date palm trees surface fibers10.1016/j.conbuildmat.2017.02.012 ↗
23. Natural thermal-insulation materials composed of renewable resources: characterization of local date palm fibers (LDPF)
24. Thermal conductivity of coconut fibre filled ferrocement sandwich panels10.1016/j.conbuildmat.2012.07.053 ↗
25. A comparison of banana fiber thermal insulation with conventional building thermal insulation10.9734/BJAST/2016/29070 ↗
26. Thermal, moisture and biological behaviour of natural insulating materials10.1016/j.egypro.2015.11.219 ↗
27. Moisture content influence on the thermal conductivity of insulating building materials made from date palm fibers mesh10.1016/j.conbuildmat.2017.05.020 ↗
28. Determination of hygrothermal parameters of experimental and commercial bio-based insulation materials10.1016/j.conbuildmat.2016.07.106 ↗
29. N. Holcroft, A. Shea, Moisture buffering and latent heat effects in natural fibre insulation materials. Portugal SB13-Contribution of Sustainable Building to meet the EU, 2013.
30. Electron microscopy study on microstructure of bamboo charcoal
31. W.B. Zhang, Study on the Bamboo charcoal and bamboo vinegar. Dissertation (PhD), Nanjing Forestry University. (in Chinese), 2002.
32. Adsorption properties and potential applications of bamboo charcoal: a review10.1051/matecconf/20167801097 ↗
33. Adsorptive removal of p-nitroaniline from aqueous solution by bamboo charcoal: kinetics, isotherms, thermodynamics, and mechanisms
34. Removal of organic pollutants in solution by bamboo charcoal10.4028/www.scientific.net/AMR.699.554 ↗
35. Fundamental characteristics and humidity control capacity of bamboo charcoal
36. Multifunctional properties of ag/tio2/bamboo charcoal composites: preparation and examination through several characterization methods10.1016/j.apsusc.2013.05.110 ↗
37. Microstructure of graphitized bamboo charcoal and preparation and properties of its composite10.1016/S1003-6326(12)61656-2 ↗
38. J.B. Zhou, Study on Mechanism of Action and Environmental Application of Bamboo Charcoal. Dissertation (PhD), Nanjing Forestry University. (in Chinese), 2005.
39. Change of inner morphological texture of bamboo during carbonization
40. A primary study of bamboo charcoal moisture absorption
41. Effect of carbonization process parameters on humidity-controlling properties of bamboo charcoal
42. Humidity conditions in the house lined with wood based materials
43. Moisture absorption and desorption characteristics and the effects of porous materials (inorganic porous material)
44. Simulation of coupled heat and moisture transfer in air-conditioned buildings10.1016/j.autcon.2008.12.006 ↗
45. G.S. Li, Microstructure and Self-humidity-control Performance of Mineral Material Sepiolite. Thesis (MSc), Hebei University Of Technology. (in Chinese), 2005.
46. Zhang · 2002
47. Status and trend of international trade of bamboo and rattan commodities
48. An environmental, economic and practical assessment of bamboo as a building material for supporting structures10.1016/j.conbuildmat.2005.02.023 ↗
49. Experimental study on bamboo hygrothermal properties and the impact of bamboo-based panel process10.1016/j.conbuildmat.2017.08.133 ↗
50. Assessment of bamboo application in building envelope by comparison with reference timber10.1016/j.conbuildmat.2017.09.026 ↗
51. Sensitivity analysis of CFD coupled non-isothermal heat and moisture modelling10.1016/j.buildenv.2010.05.011 ↗
52. Künzel · 1995
53. C. Feng, Study on the Test Methods for the Hygric Properties of Porous Building Materials. Dissertation (PhD), South China University of Technology. (in Chinese), 2014.
54. ISO 12571:2012: Hygrothermal performance of building materials and products – determination of hygroscopic sorption properties. Geneva: International Organization for Standardization, 2012.
55. ASTM-04a (2016): Standard Test Method for Hygroscopic Sorption Isotherms of Building Materials. West Conshohocken: ASTM International, 2016.
56. ISO 12572:2001(E): Hygrothermal performance of building materials and products – determination of water vapour transmission properties. Geneva: International Organization for Standardization, 2001.
57. ASTM E 96/E 96M-2005: Standard Test Methods for Water Vapor Transmission of Materials. West Conshohocken: ASTM International, 2005.
58. ISO 11357-4-2005: Plastics – Differential scanning calorimetry (DSC) – Part 4: Determination of specific heat capacity. Geneva: International Organization for Standardization, 2005.
59. ISO 8302-1991: Thermal insulation; determination of steady-state thermal resistance and related properties; guarded hot plate apparatus. Geneva: International Organization for Standardization, 1991.
60. Heat and mass transfer in capillary-porous bodies10.1016/S0065-2717(08)70098-4 ↗
61. Systems of differential equations of heat and mass transfer in capillary-porous bodies (review)10.1016/0017-9310(75)90002-2 ↗