Determination of Mechanical Properties of Thermoplastics Suitable for Micro Systems
Source abstract
Abstract
Abstract Aircraft and aerospace industry as well as medical and automotive engineering continuously develop smaller and lighter system components. Therefore it is not only important to be able to produce micro parts but also to provide properties for dimensioning and design. This paper explains to what extent mechanical properties from the macro‐range are also valid for micro structures. Thereby the modulus of elasticity as well as stress and strain at the yield point are regarded as relevant properties for the part dimensioning. Systematic investigations with tensile bars of different size show that the geometry‐dependent property changes are obviously not specific for the material classes of amorphous or semi‐crystalline thermoplastics, respectively. That is why a single material testing of micro samples is necessary to determine valid properties for this range. On the other hand the determination known from the classic materials science of plastics that lower temperatures as well as higher loading rates lead to a stiffer material behaviour, is also appropriate for the micro range. The measurements prove that the influence of temperature is much higher than the one of deformation rate. The influence of the production conditions on the mechanical behaviour of test specimen made of semi‐crystalline thermoplastics is demonstrated by using a varied cooling process. The correlation between the resulting different morphological structures and the changes in the mechanical properties is pointed up on the basis of microscopic views. Micro tensile testing machine at the IKV. magnified image Micro tensile testing machine at the IKV.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Diverse Specialized Academic Research · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. 2002 · 1603
2. R.Heinz unpublished student thesis IKV RWTH Aachen1997.
3. H.Klein A.Spennemann C.Ziegmann J.Schulz “Anlagen‐ und Verfahrensentwicklung für die Mikrotechnik” in:Proc. 20. Kunststofftechnisches Kolloquium IKV Aachen2000.
4. 2000 · 61
5. 2002 · 423
6. Menges G. · 1998
7. “Kunststoffe Mechanische und thermische Eigenschaften Prüfnormen” DIN‐Taschenbuch 18 edition1997–10.
8. http://www.campusplastics.com; July 16 2002.10.1145/504689.504690 ↗
9. A.Ilzhöfer “Eine Zugprüfvorrichtung zur Untersuchung mikrostrukturierter Proben” Scientific report FZKA 6078 Karlsruhe1998.
10. 1998
11. D.Gutberlet Ph.D. thesis RWTH Aachen2000.
12. H.Ries Ph.D. thesis RWTH Aachen1988.
13. C.Cremer Ph. D. thesis RWTH Aachen1992.
14. Pleßmannn K. · 1991
15. Michler G. H. · Polym. Sci · 1993 · 35 · 1559
16. W.Tietz Ph.D. thesis RWTH Aachen1994.
17. W.Michaeli D.Gutberlet S.Hoffmann J.Zachert “Development Steps for Integrated Material Modelling for a Semicrystalline Polymer” in:Proc. 8thInternational Workshop on Computational Mechanics of Materials MPA University of Stuttgart October 8–9 1998.