Experimental-computational approach to investigate compressive strength of magnesium phosphate cement with nanoindentation and finite element analysis
Source abstract
Abstract
Abstract This paper presented an experimental-computational approach to investigate compressive strength of magnesium phosphate cement (MPC) with nanoindentation technique and finite element analysis. Firstly, the compressive strength, macroscopic elastic modulus, porosity, microscopic elastic modulus, chemical compositions and contents of the MPC were tested by press, MIP, nanoindentation, XRD and SEM-EDS. Secondly, the microscopic elastic modulus of magnesium potassium phosphate hexahydrate (MKP) and magnesium oxide (MgO) as the components of the MPC were calculated by homogenization method. Then, the MPC was scanned by X-ray Computed Tomography (X-CT) to obtain the 3D structure adopted as the finite element model. Finally, the input parameters of the model were calibrated based on the results of homogenization and the modified constitutive relations to simulate the uniaxial compression test of the MPC. It was found that the simulated load - displacement results were in good agreement with the experimental results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Oxide Properties and Applications · Multiferroics and related materials · Electromagnetic wave absorption materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Effects of graphene oxide on the properties and microstructures of the magnesium potassium phosphate cement paste10.1016/j.conbuildmat.2016.05.060 ↗
2. Effects of water content, magnesia-to-phosphate molar ratio and age on pore structure, strength and permeability of magnesium potassium phosphate cement paste10.1016/j.matdes.2014.07.073 ↗
3. Influence of fly ash on compressive strength and micro-characteristics of magnesium potassium phosphate cement mortars10.1016/j.cemconres.2017.05.008 ↗
4. Influence of magnesia-to-phosphate molar ratio on microstructures, mechanical properties and thermal conductivity of magnesium potassium phosphate cement paste with large water-to-solid ratio10.1016/j.cemconres.2014.10.019 ↗
5. Magnesium potassium phosphate cement paste: degree of reaction, porosity and pore structure10.1016/j.cemconres.2014.07.012 ↗
6. Potential large-volume beneficial use of low-grade fly ash in magnesia-phosphate cement based materials10.1016/j.fuel.2017.08.028 ↗
7. Properties of fly ash blended magnesium potassium phosphate mortars: effect of the ratio between fly ash and magnesia
8. Steel corrosion in magnesia–phosphate cement concrete beams
9. Experimental study of magnesia and M/P ratio influencing properties of magnesium phosphate cement10.1016/j.conbuildmat.2014.04.136 ↗
10. Experimental study on mechanical properties and fracture toughness of magnesium phosphate cement10.1016/j.conbuildmat.2015.08.012 ↗
11. Factors that affect the properties of magnesium phosphate cement10.1016/j.conbuildmat.2013.05.103 ↗
12. A study of the bonding performance of magnesium phosphate cement on mortar and concrete10.1016/j.conbuildmat.2017.03.090 ↗
13. On the influence of Mg/P ratio on the properties and durability of magnesium potassium phosphate cement pastes10.1016/j.cemconres.2017.02.033 ↗
14. Effect of waterglass on water stability of potassium magnesium phosphate cement paste10.1016/j.cemconcomp.2014.03.012 ↗
15. Mechanisms of k-struvite formation in magnesium phosphate cements10.1016/j.cemconres.2016.11.008 ↗
16. Hydration behavior of magnesium potassium phosphate cement and stability analysis of its hydration products through thermodynamic modeling10.1016/j.cemconres.2017.03.015 ↗
17. Potential to design magnesium potassium phosphate cement paste based on an optimal magnesia-to-phosphate ratio10.1016/j.matdes.2017.01.012 ↗
18. Property investigation of calcium–silicate–hydrate (C–S–H) gel in cementitious composites10.1016/j.matchar.2014.06.012 ↗
19. Calculation of elastic modulus of early-age cement paste10.1680/adcr.11.00002 ↗
20. Development of a micromechanical finite element model from computed tomography images for shear modulus simulation of asphalt mixtures10.1016/j.conbuildmat.2011.12.071 ↗
21. Micromechanical modelling of typical Dense Bitumen Macadam (DBM) from laboratory testing and X-ray Computed Tomography (CT)10.1016/j.conbuildmat.2014.12.028 ↗
22. Modelling of concrete fracture at aggregate level using FEM and DEM based on X-ray μCT images of internal structure10.1016/j.engfracmech.2015.08.010 ↗
23. Two- and three-dimensional micromechanical viscoelastic finite element modeling of stone-based materials with X-ray computed tomography images10.1016/j.conbuildmat.2010.06.066 ↗
24. Visualization of the three-dimensional structure and stress field of aggregated concrete materials through 3D printing and frozen-stress techniques10.1016/j.conbuildmat.2017.03.102 ↗
25. Effect of raw material ratios on the compressive strength of magnesium potassium phosphate chemically bonded ceramics10.1016/j.msec.2013.08.031 ↗
26. Effects of fly ash, retarder and calcination of magnesia on properties of magnesia–phosphate cement10.1680/adcr.14.00029 ↗
27. Elastic modulus change investigation of cement paste before and after carbonation using nanoindentation technique10.1016/j.proeng.2011.12.461 ↗
28. Comparison for elastic modulus of cement, ground granulated blast-furnace slag and fly ash particles
29. Effects of blast furnace slag on micro-mechanical properties of interface transition zone
30. Evaluation of elastic modulus of cement paste corroded in bring solution with advanced homogenization method10.1016/j.conbuildmat.2017.09.133 ↗
31. ASTM International, ASTM C469/C469-14 Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression, West Conshohocken, PA, 2014.
32. Mercury intrusion porosimetry in concrete technology: tips in measurement, pore structure parameter acquisition and application10.1007/s10934-013-9765-4 ↗
33. Attack on plain and blended cements exposed to aggressive sulfate environments10.1016/S0958-9465(01)00082-8 ↗
34. A coupled nanoindentation/SEM-EDS study on low water/cement ratio portland cement paste: evidence for C-S-H/Ca(OH)2 nanocomposites10.1111/j.1551-2916.2009.03599.x ↗
35. Němeček, J., Šmilauer, V., and Kopecký, L., Characterization of Alkali-Activated Fly-Ash by Nanoindentation, 2009, 337–343.10.1007/978-3-642-00980-8_45 ↗
36. Application of nanoindentation testing to study of the interfacial transition zone in steel fiber reinforced mortar10.1016/j.cemconres.2009.05.002 ↗
37. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
38. Computational investigation of pore permeability and connectivity from transmission X-ray microscope images of a cement paste specimen10.1016/j.conbuildmat.2014.06.049 ↗
39. Quantitative phase analysis using the Rietveld method10.1107/S0021889887009415 ↗
40. Average stress in matrix and average elastic energy of materials with misfitting inclusions10.1016/0001-6160(73)90064-3 ↗
41. Berechnung der elastischen Konstanten des Vielkristalls aus den Konstanten des Einkristalls10.1007/BF01337948 ↗
42. On the elastic moduli of some heterogeneous materials10.1016/0022-5096(65)90011-6 ↗
43. Theory of mechanical properties of fibre-strengthened materials—III. self-consistent model10.1016/0022-5096(65)90008-6 ↗
44. China, Ministry of Housing and Urban-Rural Development of the People’s Republic of, Code for design of concrete structures. 2010: China architecture and building press.
45. Integrated experimental-computational approach for evaluating elastic modulus of cement paste corroded in brine solution on microscale10.1016/j.conbuildmat.2017.12.075 ↗
46. Guo · 2013