journal article·2019-02

Investigation on reinforcing mechanisms of semi-flexible pavement material through micromechanical model

Xing Cai, Hong Zhang, Jiayun Zhang, Xianhua Chen, Jun Yang, Jinxiang Hong

Publisher page

Abstract

Abstract Semi-flexible pavement (SFP) has been promoted to apply in pavement engineering mainly for its excellent performance in rutting resistance. Since the reinforcing mechanism of its stiffness and strength is still ambiguous, this paper aims to investigate the reinforcing mechanisms of SFP at meso-scale. SFP was regarded as a double skeleton structure (open graded asphalt skeleton and grouting cement skeleton) and three main reinforcing mechanisms were characterized on the basis of the Mori-Tanaka model (M-T), including matrix modulus, cement filling effect and double structure interlock. During the process, the matrix of SFP was redefined as asphalt mixture without effect of cement-filling air voids. The behavior of the imaginary matrix was obtained through back-calculation in M-T model. The two springs, two parabolic elements, and one dashpot (2S2P1D) model was utilized to characterize viscoelastic behavior and two interlock factors were established to amend interlock effect. The results may demonstrate the existence of physiochemical stiffening effect of grouting cement and imperfect interphase between the two skeletons. SFP with matrix of three different original porosities were compared during the prediction process. It was found that the reinforcing rate was positively related with original porosity. While the dynamic modulus value of SFP, meaning specially storage modulus value, depended more on the matrix gradation than porosity. And grouting cement had a negative effect on the holistic loss modulus at high frequencies.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Geotechnical Engineering and Underground Structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Jointless pavements for heavy-duty airport application: the semi-flexible approach
2. Design and performance validation of high-performance cement paste as a grouting material for semi-flexible pavement10.1016/j.conbuildmat.2016.09.036 ↗
3. Setyawan · 2006
4. Development of a semi-flexible heavy duty pavement surfacing incorporating recycled and waste aggregates–preliminary study10.1016/j.conbuildmat.2015.10.165 ↗
5. The performance analysis of semi-flexible pavement by the volume parameter of matrix asphalt mixture
6. Investigation into engineering properties and strength mechanism of grouted macadam composite materials10.1080/10298436.2015.1024467 ↗
7. The application of semi-flexible pavement on heavy traffic roads
8. Formulation and performance comparison of grouting materials for semi-flexible pavement10.1016/j.conbuildmat.2016.04.062 ↗
9. Design and performance validation of high-performance cement paste as a grouting material for semi-flexible pavement10.1016/j.conbuildmat.2016.09.036 ↗
10. Asessing the compressive strength properties of semi-flexible pavements10.1016/j.proeng.2013.03.079 ↗
11. Comprehensive service properties evaluation of composite grouting materials with high-performance cement paste for semi-flexible pavement10.1016/j.conbuildmat.2017.07.122 ↗
12. Understanding asphalt mastic behavior through micromechanics10.3141/1681-19 ↗
13. Micromechanical creep models for asphalt-based multi-phase particle-reinforced composites with viscoelastic imperfect interface10.1016/j.ijengsci.2013.11.011 ↗
14. Interface effects on the creep characteristics of asphalt concrete10.1016/j.conbuildmat.2015.08.075 ↗
15. Micromechanical model for asphalt mixture coupling inter-particle effect and imperfect interface10.1016/j.conbuildmat.2017.05.015 ↗
16. Shen · 2005
17. ASTM C469 · 2011
18. AASHTO T 342-11 · 2011
19. The Huet-Sayegh model: a simple and excellent rheological model for master curves of asphaltic mixes
20. Average stress in matrix and average elastic energy of materials with misfitting inclusions10.1016/0001-6160(73)90064-3 ↗
21. Influence of temperature rising by 20 oC to 50 oC on concrete elastic modulus
22. Laboratory evaluation of fatigue life characteristics of polymer modified porous asphalt: a dissipated energy approach10.1016/j.conbuildmat.2017.02.043 ↗
23. Influence of mesoscale three-phase parameters to the tensile behavior of concrete
24. Three-dimensional micromechanical complex-modulus prediction of asphalt concrete considering the aggregate interlocking effect10.1061/(ASCE)MT.1943-5533.0001997 ↗
25. Characterization of triaxial stress state linear viscoelastic behavior of asphalt concrete10.1061/(ASCE)MT.1943-5533.0001776 ↗
26. Approach for quantifying the effect of binder oxidative aging on the viscoelastic properties of asphalt mixtures10.3141/2373-12 ↗
27. A study of the strength mechanism of semi-flexible composite pavement material and a modified method for the determination of its compressive resilient modulus