Development and structuring of combined positive-negative/negative-positive resists using laser ablation as positive dry etching technique
Source abstract
Abstract
Novel photopolymers, based on cinnamylidenemalonyl groups, were designed for excimer laser ablation lithography. These polymers are highly sensitive to laser ablation at a specific irradiation wavelength, i. e., 308 nm, but can also be applied as classical, negative photoresist. The crosslinking of the polymer is accomplished by irradiation at >395 nm. The sensitivity of the photopolymers to laser ablation before and after crosslinking is nearly equal. The combination of these two processes, i. e., laser ablation and photocrosslinking, can be applied for the fabrication of arrays of microstructures. The laser ablation step is used to fabricate microstructures, while the classical wet processing is used for large area structuring. Combined processes of crosslinking-wet development and laser microstructuring, but also vice versa were carried out. The microstructures had the same high resolution, independent of the processing order.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Photolithography Techniques · Semiconductor materials and devices · Integrated Circuits and Semiconductor Failure Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.