journal article·2019-04Open access

Extrudability of cement-based composites reinforced with curauá (Ananas erectifolius) or polypropylene fibers

R.S. Teixeira, S.F. Santos, A.L. Christoforo, H. Savastano, F.A.R. Lahr

Abstract

Abstract The aim of this research was to evaluate the influence of the curaua or polypropylene fibers on rheological properties of fresh cementitious paste. The variables were the percentage of fiber content 1 wt% or 2 wt% and the length of the curaua or polypropylene fibers: 6 or 10 mm, but it was also prepared paste without fibers as reference. Squeeze flow and ram extrusion tests were carried out to analyze the flow of the pastes. The hardened paste was evaluated by X-ray microtomography to observe the orientation of the fibers inside the paste. Curaua fiber led to higher force of extrusion and lower displacement of the fresh cement paste at the squeeze flow test and increased the pressure at the ram extrusion test in relation to polypropylene fibers, independently of the content and length. However, length of the same fiber presented higher influence on mixture flow than fiber content.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Innovations in Concrete and Construction Materials · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Caracterização reológica de argamassas pelo método de squeeze flow
2. Processing of high-performance fiber-reinforced cement-based composites10.1016/j.conbuildmat.2007.06.018 ↗
3. Durability study of PVA fibers in fibre–cement products
4. Brazilian waste fibres as reinforcement for cement-based composites10.1016/S0958-9465(00)00034-2 ↗
5. Cellulose modified fibres in cement based composites10.1016/j.compositesa.2009.09.016 ↗
6. Extruded cement based composites reinforced with sugar cane bagasse fibres10.4028/www.scientific.net/KEM.517.450 ↗
7. Effect of colloidal silica on the mechanical properties of fiber–cement reinforced with cellulosic fibers10.1007/s10853-014-8455-1 ↗
8. Characterization of lignocellulosic curaua fibres10.1016/j.carbpol.2008.12.005 ↗
9. Introducing a curauá fiber reinforced cement-based composite with strain-hardening behavior10.1016/j.indcrop.2017.03.016 ↗
10. Asbestos-free technology with new high toughness polypropylene (PP) fibers in air-cured Hatschek process10.1016/j.conbuildmat.2009.06.019 ↗
11. Comportamento à compressão de argamassas reforçadas com fibras vegetais da Amazônia
12. Wood fibre - cement composites by extrusion10.1139/l99-093 ↗
13. Short fiber-reinforced cementitious extruded plates with high percentage of slag and different fibers10.1016/S0008-8846(00)00333-1 ↗
14. Supercritical carbonation treatment on extruded fibre–cement reinforced with vegetable fibres10.1016/j.cemconcomp.2014.11.007 ↗
15. Nanoindentation study of the interfacial zone between cellulose fiber and cement matrix in extruded composites10.1016/j.cemconcomp.2017.09.018 ↗
16. Solvent extractives of wood and pulp, TAPPI TEST METHODS
17. Properties of nanofibrillated cellulose from different raw materials and its reinforcement potential10.1016/j.carbpol.2009.10.045 ↗
18. Acid-insoluble lignin in wood and pulp, TAPPI TEST METHODS
19. Progress report on natural fiber reinforced composites10.1002/mame.201300008 ↗
20. Characterization of Curaua Fiber10.1080/10587250008025655 ↗
21. Different ageing conditions on cementitious roofing tiles reinforced with alternative vegetable and synthetic fibres10.1617/s11527-013-0070-0 ↗
22. Hybrid reinforcement of sisal and polypropylene fibers in cement-based composites10.1061/(ASCE)MT.1943-5533.0000152 ↗
23. Polypropylene fiber reinforced cement mortars containing rice husk ash and nano-alumina10.1016/j.conbuildmat.2016.02.124 ↗
24. ASTM C 150, Am. Soc. Test. Mater. – ASTM C150/C150M-11. Stand. Specif. Portl. Cem. 2011.
25. The flow of pastes through dies of complicated geometry10.1016/0032-5910(91)80201-S ↗
26. The cutting of paste extrudates10.1016/0009-2509(93)80175-P ↗
27. The use of extrusion rheometry in the development of extrudate fibre-reinforced cement composites
28. Interfacial transition zone between lignocellulosic fiber and matrix in cement-based composites
29. 3D experimental investigation of the microstructure of cement pastes using synchrotron X-ray microtomography10.1016/j.cemconres.2006.10.012 ↗
30. I.R. Oliveira, A.R. Studart, R.G. Pileggi, V.C. Pandolfelli, Dispersão e empacotamento de partículas: Princípios e aplicações em processamento cerâmico., Ed. Fazendo Arte, 224p., São Paulo, 2000.
31. Caracterização Reológica de Argamassas pelo Método de Squeeze-Flow
32. Rheological behavior as influenced by plasticizers and hydration kinetics10.1016/j.cemconres.2007.01.009 ↗
33. The squeezing test: a tool to identify firm cement-based material’s rheological behaviour and evaluate their extrusion ability10.1016/j.cemconres.2004.09.007 ↗
34. Short fiber reinforced geopolymer composites manufactured by extrusion10.1061/(ASCE)0899-1561(2005)17:6(624) ↗
35. Characterization of rheology of fresh fiber reinforced cementitious composites through ram extrusion10.1007/BF02480570 ↗
36. Rheological studies on cordierite honeycomb extrusion10.1016/S0955-2219(02)00045-6 ↗
37. Rheology of semi-solid fresh cement pastes and mortars in orifice extrusion10.1016/j.cemconcomp.2013.01.004 ↗
38. Characterization and modeling of pores and surfaces in cement paste: correlations to processing and properties10.3151/jact.6.5 ↗
39. Mehta · 2006
40. Laboratory study on the effect of polypropylene fiber on durability, and physical and mechanical characteristic of concrete for application in sleepers10.1016/j.conbuildmat.2013.02.076 ↗
41. Performance and durability of cement based composites reinforced with refined sisal pulp10.1080/10426910601062065 ↗