journal article·2019-08

Evaluation of shear strength of plain and steel fibrous concrete at high temperatures

Mehrdad Abdi Moghadam, Ramezanali Izadifard

Publisher page

Abstract

Abstract One of the most common destructive factors of reinforced concrete structures is fire. The shear strength is one of the major components of the concrete mechanical properties and plays a significant role in the overall behavior and failure of the concrete members. In this investigation, three concrete compressive strengths of 20, 40, and 80 MPa were tested to derive an equation to predict the shear strength of plain concrete. Then by conducting shear strength test on the specimens containing 0.25 and 0.5% of steel fiber and using a regression approach, an equation which predicts the shear strength of concrete was proposed. The accuracy of the proposed equation was verified by comparing the predicted values with the experimental result of the previous researches. Finally, the shear strength test was done at temperatures of 100, 200, 300, 400, 450, 500, 600 and 800 °C to derive another equation which predicts the shear strength of concrete based on the compressive strength, the volume fraction of the fiber and the target temperature. It was observed that the inclusion of 0.25 and 0.5% of steel fibers improved the shear strength of plain concrete at the tested temperatures on average by 8.82 and 13.44%, respectively. Meanwhile, it was observed that by increasing the temperature, the shear strength of the concrete decreases and with further increase in temperature to 450 °C they recovered their shear strength and then started to decline sharply.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fire effects on concrete materials · Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. I.A. Fletcher, A. Borg, N. Hitchen, S. Welch, Performance of concrete in fire: a review of the state of the art, with a case study of the Windsor tower fire, (2006).
2. B. Meacham, M. Engelhardt, V. Kodur, Collection of data on fire and collapse, faculty of architecture building, delft university of technology, in: Proc. NSF Eng. Res. Innov. Conf. Honolulu, Hawaii, 2009.
3. S. Ewen, Grenfell Lessons, Firefighter. (2017) 14–15.10.12968/cypn.2017.12.14 ↗
4. 2017 California wildfires, (2017). https://en.wikipedia.org/wiki/2017_California_wildfires.
5. Aggregate’s influence on thermophysical concrete properties at elevated temperature10.1016/j.conbuildmat.2015.07.060 ↗
6. Fire response of hybrid fiber reinforced concrete to high temperature10.1016/j.proeng.2017.02.123 ↗
7. A study on the effects of high temperature on mechanical properties of fiber reinforced cementitious composites10.1016/j.compositesb.2011.10.005 ↗
8. Influence of high temperature on steel fiber reinforced concrete
9. Evaluation of mechanical properties of steel-fibre-reinforced concrete exposed to high temperatures by double-punch test10.1016/j.conbuildmat.2015.01.042 ↗
10. A study on the mechanical properties of self-compacting concrete at high temperature and after cooling10.1617/s11527-012-9839-9 ↗
11. Mechanical properties of concrete composites subject to elevated temperature10.1016/j.firesaf.2017.10.010 ↗
12. Introduction to fracture mechanics
13. Shear strength of reinforced concrete beams with a fiber concrete matrix10.1139/l05-118 ↗
14. Effectiveness of stirrups and steel fibres as shear reinforcement10.1016/j.cemconcomp.2003.07.001 ↗
15. Shear behavior of steel fiber reinforced concretes
16. A. Khanlou, G.A. MacRae, A.N. Scott, S.J. Hicks, G.C. Clifton, Shear performance of steel fibre-reinforced concrete, in: Australas. Struct. Eng. Conf. 2012 Past, Present Futur. Struct. Eng., Engineers Australia, 2012: p. 400.
17. C. Wang, Experimental investigation on behavior of steel fiber reinforced concrete (SFRC), (2006).
18. Mechanical behavior of recycled coarse aggregate concrete reinforced with steel fibers under direct shear10.1016/j.cemconcomp.2017.01.006 ↗
19. Use of steel fibers as shear reinforcement
20. Influence of yield stress and compressive strength on direct shear behaviour of steel fibre-reinforced concrete10.1016/j.conbuildmat.2011.07.015 ↗
21. Deformation properties and direct shear of medium strength concrete prepared with 100% recycled coarse aggregates10.1016/j.conbuildmat.2013.06.065 ↗
22. J.S. of C. Engineering, JSCE-SF6 “Method of Test for Shear Strength of Steel Fiber Reinforced Concrete (SFRC)“, Tokyo, 1990.
23. Shear transfer in reinforced concrete
24. F.I. de la, Precontrainte, FIP guide of good practice, Compos. Floor Struct 1998 FIP, London. UK.
25. Optimisation of steel fibre reinforced concretes by means of statistical response surface method10.1016/S0958-9465(03)00161-6 ↗
26. The influence of amount and aspect ratio of fibers on shear behaviour of steel fiber reinforced concrete10.1007/s12205-016-0787-2 ↗
27. Shear strength of steel fiber-reinforced concrete beams
28. A formula to predict the maximum direct shear load of SFRC
29. Abdoladel, Shear in steel fiber reinforced concrete members without stirrups, 2012.
30. E. Committee, Eurocode2: Design of concrete structures-Part 1-2: General rules-Structural fire design, ENV 1992-1-2, 1995.
31. A. ANSI, AISC 360-10, Chicago, IL. (2010).
32. B. Standard Testing hardened concrete 2009 Compressive Strength Test Specimens BS EN 12390 12393.
33. Toughness Indices of fiber reinforced concrete subjected to mode II loading
34. BSI, Bs 8500–1, Concrete-Complementary British Standard to BS EN 206–1–Part 1: Method of Specifying and Guidance for the Specifier. 2006.
35. Shear transfer across a crack in reinforced high-strength concrete10.1061/(ASCE)0899-1561(2008)20:4(294) ↗
36. Shear strength of steel fiber reinforced high-strength concrete
37. Influence of concrete and fiber characteristics on behavior of steel fiber reinforced concrete under direct shear
38. Fiber-reinforced concrete with low content of recycled steel fiber: shear behaviour10.1016/j.conbuildmat.2017.11.101 ↗
39. Shear strength of steel fiber-reinforced concrete
40. Mechanical properties of concrete subjected to high temperature
41. Study on high-performance concrete at high temperatures in China (2004–2016)-An updated overview10.1016/j.firesaf.2017.10.007 ↗
42. C. Castillo, Effect of transient high temperature on high-strength concrete, (1987).
43. Chemical and mechanical stability of sodium sulfate activated slag after exposure to elevated temperature10.1016/j.cemconres.2011.10.007 ↗
44. Change in microstructure of hardened cement paste subjected to elevated temperatures10.1016/j.conbuildmat.2006.11.002 ↗
45. G.A. Khoury Y. Anderberg K. Both J. Fellinger N.P. Høj C. Majorana Fib bulletin 38: fire design of concrete structures—materials, structures and modelling, state-of-the art report 2007 Fed. Int Du Beton, Lausanne, Switz.10.35789/fib.BULL.0038 ↗