Mechanical-strength-growth law and predictive model for cement-stabilized macadam
Source abstract
Abstract
Abstract To characterize the mechanical-strength growth of cement-stabilized macadam (CSM), the effects of different cement dosages, aggregate types, aggregate gradations, and curing times on the mechanical strength of CSM produced using the vertical-vibration-compaction method (VVCM) are studied. Then, a mechanical-strength-prediction equation and model for VVCM-compacted CSMs are proposed. The mechanical-strength ratio between the VVCM-compacted CSM laboratory specimens and the field cores exceeds 92%. The strength-growth rate of the VVCM-compacted CSM is very high at a curing time within 14 days and tends to be gentle after 28 days, settling eventually after 90 days. The correlation coefficient R2 of the proposed mechanical-strength-growth equation exceeds 0.98; the mechanical strength can be predicted when the cement dosage, aggregate type, and aggregate gradation are known. R2 of the established mechanical-strength-prediction model of CSM is as high as 0.97; thus, when the aggregate types and the mechanical strength at the curing time of 3 days are known, this prediction model can effectively predict the mechanical strength of the CSM with any curing time (T ≥ 3). Empirical on-field data, in comparison with proposed growth equation and prediction model, deviates only slightly, which can facilitate the design and construction of unique CSM bases.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Geotechnical Engineering and Soil Stabilization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Application of asphalt mixture shear strength to evaluate pavement rutting with accelerated loading facility (ALF)10.1016/j.conbuildmat.2012.11.111 ↗
2. Development of a rutting prediction model for asphalt pavements with the use of an accelerated loading facility10.1080/14680629.2015.1055337 ↗
3. Influence of emulsified asphalt on the mechanical property and microstructure of cement-stabilized gravel under freezing and thawing cycle conditions10.3390/ma10050504 ↗
4. Physical and Chemical Behavior of Four Cement-Treated Aggregates10.1061/(ASCE)0899-1561(2007)19:10(891) ↗
5. Mechanical properties of cement-treated aggregate material–A review10.1016/j.matdes.2011.04.055 ↗
6. Laboratory investigation on the strength characteristics of Cement-Treated Base
7. Characterization of hydraulically bound base materials through digital image correlation10.1016/j.conbuildmat.2015.03.033 ↗
8. Influence of chemical additives on mixing procedures and performance properties of asphalt emulsion recycled mixture with reclaimed cement-stabilized macadam10.1016/j.conbuildmat.2016.05.050 ↗
9. Sherwood · 1995
10. J. T. Balbo, High quality cement treated crushed stones for concrete pavement bases. In: Proceedings of 6th international Purdue conference on concrete pavement; 1997 November18-21, Indianapolis, USA.
11. Physical and chemical behavior of four cement-treated aggregates10.1061/(ASCE)0899-1561(2007)19:10(891) ↗
12. Molenaar · 2005
13. Strength and elastic properties of structural lightweight concretes10.1016/j.matdes.2010.12.053 ↗
14. Trial Study on Influence Factors of Cement-Stabil ized Macadam Strength
15. Development of mechanistic shrinkage cracking model for cementitiously stabilized materials10.3141/2580-03 ↗
16. Modeling of moisture diffusion in crushed basaltic rock stabilized with cementitious binders10.1061/(ASCE)0899-1561(2005)17:6(703) ↗
17. Modeling of moisture loss in cementitiously stabilized pavement materials10.1061/(ASCE)1532-3641(2005)5:4(295) ↗
18. Microstructure and its relationship to some material properties of cementitiously stabilised crushed basaltic rock
19. Basaltic crushed rock stabilized with cementitious additives: compressive strength and stiffness, drying shrinkage, and capillary flow characteristics10.3141/1819b-03 ↗
20. Direct tensile failure of cementitiously stabilized crushed rock mater10.1139/t06-102 ↗
21. Resilient moduli of cement treated materials
22. Fatigue characterization of lightly cementitiously stabilized granular base materials using flexural testing10.1061/(ASCE)MT.1943-5533.0001598 ↗
23. The bending fatigue performance of cement-stabilized aggregate reinforced with polypropylene filament fiber10.1016/j.conbuildmat.2015.02.073 ↗
24. Effect of polypropylene fibre on mechanical and shrinkage properties of cement-stabilised macadam10.1080/10298430802363985 ↗
25. Investigation of flexural properties of cement-stabilized macadam reinforced with polypropylene fiber10.1061/(ASCE)MT.1943-5533.0000137 ↗
26. Experimental study on shrinkage properties of cement-stabilized macadam reinforced with polypropylene fiber
27. An investigation of mechanical behavior of cement-stabilized crushed rock material using different compaction methods10.1016/j.conbuildmat.2013.07.017 ↗
28. Comparison on properties of cement-stabilised gravel prepared by different laboratory compaction methods
29. Effect of compaction methods on physical and mechanical properties of asphalt mixture10.1061/(ASCE)MT.1943-5533.0002732 ↗
30. Investigation into the performance of asphalt mixture designed using different methods10.1016/j.conbuildmat.2018.05.108 ↗
31. Investigation of the fatigue properties of asphalt mixture designed using vertical vibration method
32. Investigation into physical and mechanical properties of SRX-stabilised crushed rock using different compaction methods
33. Influence of volumetric property on mechanical properties of vertical vibration compacted asphalt mixture10.1016/j.conbuildmat.2016.12.159 ↗
34. Ministry of Transport of the People’s Republic of China, Testing Methods of Material Stabilized with Inorganic Binders for Highway Engineering (JTG E51-2009). Beijing: China Communications Press. (in Chinese).
35. Experimental analysis of the effect of some compaction methods on mechanical properties and durability of cement stabilized soil10.1007/s10853-006-0226-1 ↗
36. Mechanical properties and strength criteria of cement-stabilised recycled concrete aggregate10.1080/10298436.2017.1293266 ↗