The effect of compressive loading on the residual gas permeability of concrete
Source abstract
Abstract
Abstract Concrete permeability is related to pore connectivity and measures the flow rate of gases and liquids through the concrete under a pressure gradient. Information about concrete permeability - both in ordinary environmental conditions and after the exposure to high temperature - is, therefore, badly needed to better understand fluid transport in concrete, with specific reference to high temperature. In fact, permeability influences concrete spalling in fire by favoring pore-pressure build-ups during the heating process. In this research project, two different procedures are adopted to carry out permeability tests on concrete specimens either unloaded or preloaded during the heating process. The results show that concrete permeability strongly depends on crack width and orientation, both are affected by the axial compression or radial confinement.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fire effects on concrete materials · Innovative concrete reinforcement materials · Structural Response to Dynamic Loads
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. V.V. Zhukov, Reasons of explosive spalling of concrete by fire, Beton i zhlezobeton (Concrete and Reinforcement Concrete), Issue 3, 1976.
2. G.A. Khoury, Y. Anderberg, Concrete spalling review, Fire safety design, report submitted to the Swedish National Road Administration, Sweden, 2000.
3. Fire spalling behaviour of concrete: role of mechanical loading (uniaxial and biaxial) and cement type10.4028/www.scientific.net/KEM.711.549 ↗
4. Pulse-echo monitoring of concrete damage and spalling during fire
5. Effects and interactions of temperature and stress-level related damage on permeability of concrete10.1016/j.cemconres.2006.09.015 ↗
6. Experimental study on a mortar. Temperature effects on porosity and permeability. Residual properties or direct measurements under temperature10.1016/j.cemconres.2005.02.006 ↗
7. Coupled transport and poro-mechanical properties of a heat-treated mortar under confinement10.1016/j.cemconres.2013.03.006 ↗
8. The effects of high temperature heating on the gas permeability and porosity of a cementitious material10.1016/j.cemconres.2017.01.003 ↗
9. Miah · 2017
10. Mindeguia · 2009
11. Durability of ordinary concrete after heating at high temperature10.4028/www.scientific.net/KEM.711.428 ↗
12. On the influence of aggregate nature on concrete behaviour at high temperatura10.1080/19648189.2012.667682 ↗
13. Experimental analysis of concrete spalling due to fire exposure10.1080/19648189.2013.786245 ↗
14. Experimental discussion on the mechanisms behind the fire spalling of concrete10.1002/fam.2254 ↗
15. NF EN 197-1, Cement - Part 1: Composition, Specifications and Conformity Criteria for Common Cements, April 2012.
16. NF EN 12390-3: 2012, Testing Hardened Concrete - Part 3: Compressive Strength of Test Specimens, April 2012.
17. NF EN 12390-6: 2012, Testing Hardened Concrete - Part 6: Tensile Splitting Strength of Test Specimens, April 2012.
18. The determination of the permeability of concrete to oxygen by the cembureau method - a recommendation10.1007/BF02472192 ↗
19. Hager · 2004
20. Klinkenberg · 1941 · 200
21. High-temperature behaviour of HPC with polypropylene fibres: from spalling to microstructure10.1016/S0008-8846(01)00596-8 ↗
22. Parametrical study of transient thermal strain of ordinary and high performance concrete10.1016/j.cemconres.2013.02.004 ↗
23. Influence of the preload on the mechanical properties of high strength concrete at high temperatures
24. Experimental investigation of strain behaviour of heated cement paste and concrete10.1111/str.12032 ↗
25. Fire spalling of concrete: effect of cement type
26. Effects of thermal damage on physical properties and cracking behavior of ultrahigh-performance fiber-reinforced concrete10.1007/s10853-016-0233-9 ↗