journal article·2019-10Open access

Comparison of different techniques to study the nanostructure and the microstructure of cementitious materials with and without superabsorbent polymers

D. Snoeck, L. Pel, N. De Belie

Abstract

It is difficult to study the microstructural porosity in time without destroying the samples and stopping hydration. Current techniques mainly involve mercury intrusion porosimetry and microscopic analysis. These destructive techniques are able to give information on the microstructure, but the nanostructure is affected due to sample preparation. Dynamic vapour sorption is a technique which is not often used to study the nanostructure of cementitious materials and requires the application of different models. Furthermore, nuclear magnetic resonance can be applied to non-destructive study not only the total water content but also the pore size distribution by comparing the T2 relaxation times, and can be combined with cryoporometry. In this paper, these different measuring techniques are compared and linked to each other. The obtained nano- and microstructures are compared to different models found in literature. Pore sizes in the range of 1.5–2 nm and of 8–12 nm are found, reflecting the gel pores. In addition, some bigger capillary pores are found. The measuring techniques are complementary to each other as they study different pore size ranges and are based on different phenomena.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Concrete Properties and Behavior · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Validation of self-healing properties of construction materials through non-destructive and minimal invasive testing adv10.1002/admi.201800179 ↗
2. Mechtcherine · 2012 · 165
3. Use of superabsorbent polymers (SAP) as concrete additive10.21809/rilemtechlett.2016.18 ↗
4. Superabsorbent polymers to seal and heal cracks in cementitious materials10.21809/rilemtechlett.2018.64 ↗
5. Rheological characterisation and prediction of pumpability of strain-hardening cement-based composites (SHCC) with and without addition of superabsorbent polymers (SAP) at various temperatures10.1016/j.conbuildmat.2016.02.161 ↗
6. Enhancing Early-age Resistance to Cracking in High-Strength Cement Based Materials by Means of Internal Curing using Super Absorbent Polymers
7. Superabsorbent polymers to mitigate plastic drying shrinkage in a cement paste as studied by NMR10.1016/j.cemconcomp.2018.06.019 ↗
8. Water-entrained cement-based materials I. Principles and theoretical background10.1016/S0008-8846(01)00463-X ↗
9. Water-entrained cement-based materials II. Experimental observations10.1016/S0008-8846(02)00737-8 ↗
10. The water kinetics of superabsorbent polymers during cement hydration and internal curing visualized and studied by NMR
11. Effect of internal curing by using superabsorbent polymers (SAP) on autogenous shrinkage and other properties of a high-performance fine-grained concrete: results of a RILEM round-robin test, TC 225-SAP10.1617/s11527-013-0078-5 ↗
12. Influence of Barchip fiber length on early-age behavior and cracking resistance of concrete internally cured with super absorbent polymers10.1016/j.conbuildmat.2019.03.209 ↗
13. Effect of superabsorbent polymers (SAP) on the freeze-thaw resistance of concrete: results of a RILEM interlaboratory test
14. Void structure of concrete with superabsorbent polymers and its relation to frost resistance of concrete10.1617/s11527-013-0188-0 ↗
15. Visualization of water penetration in cementitious materials with superabsorbent polymers by means of neutron radiography10.1016/j.cemconres.2012.05.005 ↗
16. Potential of superabsorbent polymer for self-sealing cracks in concrete10.1179/174367609X459559 ↗
17. Self-healing cementitious materials by the combination of microfibres and superabsorbent polymers10.1177/1045389X12438623 ↗
18. Repeated autogenous healing in strain-hardening cementitious composites by using superabsorbent polymers
19. Effect of high amounts of superabsorbent polymers and additional water on the workability, microstructure and strength of mortars with a water-to-cement ratio of 0.5010.1016/j.conbuildmat.2014.09.012 ↗
20. The effects of superabsorbent polymers on the microstructure of cementitious materials studied by means of sorption experiments10.1016/j.cemconres.2015.06.013 ↗
21. Can superabsorbent polymers mitigate autogenous shrinkage of internally cured concrete without compromising the strength?10.1016/j.conbuildmat.2011.12.062 ↗
22. Experimental Study on Prevention of Autogenous Deformation by Internal Curing using Super-Absorbent Polymer Particles
23. Preliminary Results about 3D Distribution of Superabsorbent Polymers in Mortars
24. Superabsorbent Polymers – An Additive to Increase the Freeze-Thaw Resistance of High Strength Concrete
25. Mitigating Early Age Shrinkage of Ultra-High Performance Concrete by using Super Absorbent Polymers (SAP)
26. Enhanced Durability of Concrete by Superabsorbent Polymers
27. Mercury porosimetry: An inappropriate method for the measurement of pore size distributions in cement-based materials10.1016/S0008-8846(00)00370-7 ↗
28. Damage to the pore structure of hardened Portland cement paste by mercury intrusion10.1111/j.1151-2916.1997.tb03144.x ↗
29. The effect of drying on cement pastes pore structure as determined by mercury porosimetry10.1016/0008-8846(88)90098-1 ↗
30. Taylor · 1990
31. Water vapour sorption experiments on hardened cementitious materials – Part I: essential tool for analysis of hygral behaviour and its relation to pore structure10.1016/j.cemconres.2006.11.019 ↗
32. Role of the surface chemistry of the adsorbent on the initialization step of the water sorption process
33. Importance of classical diffusion in NMR studies of water in biological cells10.1103/PhysRevA.19.2446 ↗
34. Densification of C-S-H Measured by 1H NMR Relaxometry10.1021/jp3102964 ↗
35. Combined NMR cryoporometry and relaxometry10.1088/0022-3727/35/3/314 ↗
36. NMR diffusion and relaxation studies during cement hydration—A non-destructive approach for clarification of the mechanism of internal post curing of cementitious materials10.1016/j.cemconres.2005.12.007 ↗
37. Water balance and pore structure development in cementitious materials in internal curing with modified superabsorbent polymers studied by NMR10.1016/j.micromeso.2009.02.024 ↗
38. St John · 1998
39. Mindess · 1981
40. Influence of the age and drying process on pore structure and sorption isotherms of hardened cement paste10.1016/j.cemconres.2006.06.010 ↗
41. The potential theory of adsorption of gases and vapors for adsorbents with energetically nonuniform surfaces10.1021/cr60204a006 ↗
42. IUPAC, Manual of Symbols and Terminology, Appendix 2, Pt.1, Colloid and Surface Chemistry, Pure Appl. Chem. 31(1) (1972) 578-680.
43. Recommendation of RILEM TC 260-RSC: testing sorption by superabsorbent polymers (SAP) prior to implementation in cement-based material
44. Powers · 1948
45. Comparison of methods for arresting hydration of cement10.1016/j.cemconres.2011.06.003 ↗
46. The influence of different drying techniques on the water sorption properties of cement-based materials10.1016/j.cemconres.2014.06.009 ↗
47. Report of TC 238-SCM: hydration stoppage methods for phase assemblage studies of blended cements - results of a round robin test
48. Adsorption of gases in multimolecular layers10.1021/ja01269a023 ↗
49. Physical Adsorption of Gases and Vapors in Micropores10.1016/B978-0-12-571809-7.50006-1 ↗
50. The determination of pore volume and area distributions in porous substances I – computations from nitrogen isotherms10.1021/ja01145a126 ↗
51. From electrons to infrastructure: engineering concrete from the bottom up10.1016/j.cemconres.2011.03.025 ↗
52. Estimation of C-S-H content in a blended cement paste using water adsorption10.1016/S0008-8846(01)00454-9 ↗
53. Richardson · Cem. Concr. Res. · 2004 · 34 · 173310.1016/j.cemconres.2004.05.034 ↗
54. A model for the microstructure of calcium silicate hydrate in cement paste10.1016/S0008-8846(99)00209-4 ↗
55. The surface area of hardened cement paste as measured by various techniques
56. X-ray computed microtomography to study autogenous healing of cementitious materials promoted by superabsorbent polymers10.1016/j.cemconcomp.2015.10.016 ↗
57. Incorporation of SAP particles as controlling pre-existing flaws to improve the performance of ECC10.1016/j.conbuildmat.2011.08.032 ↗