journal article·2019-11

Effects of the type of activator on the self-healing ability of fiber-reinforced alkali-activated slag-based composites at an early age

Huy Hoàng Nguyễn, Jeong-Il Choi, Hyeong-Ki Kim, Bang Yeon Lee

Publisher page

Abstract

Abstract This paper presents an experimental investigation of the self-healing ability of fiber-reinforced slag-based composites activated by a single type of alkali activator at an early age. In order to investigate the effects of the type of alkali activator on the self-healing ability of fiber-reinforced slag-based composites, three mixtures reinforced by polyethylene fibers and with different alkali activators, in this case calcium hydroxide, sodium hydroxide, and sodium silicate, were designed and prepared. Compressive strength and uniaxial tension tests were conducted to measure the mechanical properties of each mixture. The self-healing ability in each case was evaluated by observing the crack width and by measuring the resonance frequency. Scanning electron microscopy and energy-dispersive X-ray spectroscopy were also utilized to analyze the morphology and chemical compositions of the healing materials. The results of these tests showed that autogenous healing of alkali-activated slag-based composites is accomplishable through structural restoration, specifically by reducing the crack opening and through mechanical recovery. The dominant healing materials of the calcium activator-based alkali-activated slag composite was CaCO3, in contract to the C-(N)-A-S-H, CaCO3, and some amount of Na2CO3 which formed in the sodium activator-based alkali-activated slag composites.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microbial Applications in Construction Materials · Concrete and Cement Materials Research · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Porosimetric features of calcium sulfoaluminate and Portland cement pastes: testing protocols and data analysis
2. Mechanical strength and durability of mineral admixture concrete subjected to accelerated carbonation
3. Tensile properties of concrete at very early ages10.1016/j.conbuildmat.2016.12.169 ↗
4. Effect of crystalline admixtures on the self-healing capability of early-age concrete studied by means of permeability and crack closing tests10.1016/j.conbuildmat.2016.03.196 ↗
5. A multiphysics model for concrete at early age applied to repairs problems10.1016/j.engstruct.2013.09.042 ↗
6. Autogenous healing of engineered cementitious composites at early age10.1016/j.cemconres.2010.11.002 ↗
7. Self-healing behaviour of multiple microcracks of strain hardening cementitious composites (SHCC)10.1016/j.conbuildmat.2018.03.032 ↗
8. Self-healing of microcracks in Engineered Cementitious Composites under sulfate and chloride environment10.1016/j.conbuildmat.2017.07.126 ↗
9. Autogenous healing of fiber-reinforced reactive magnesia-based tensile strain-hardening composites10.1016/j.cemconres.2018.09.016 ↗
10. Coupled effects of crack width, slag content, and conditioning alkalinity on autogenous healing of engineered cementitious composites10.1016/j.cemconcomp.2016.07.013 ↗
11. Enhanced crack closure performance of microbial mortar through nitrate reduction10.1016/j.cemconcomp.2016.04.001 ↗
12. Synthesis and characterization of a new polymeric microcapsule and feasibility investigation in self-healing cementitious materials10.1016/j.conbuildmat.2015.12.185 ↗
13. A methodology to assess crack-sealing effectiveness of crystalline admixtures under repeated cracking-healing cycles10.1016/j.conbuildmat.2018.05.261 ↗
14. Microfluidic fabrication of microcapsules tailored for self-healing in cementitious materials10.1016/j.conbuildmat.2018.07.005 ↗
15. Self-healing properties of cement-based and alkali-activated slag-based fiber-reinforced composites10.1016/j.conbuildmat.2018.01.023 ↗
16. Autogenous healing of engineered cementitious composites under wet–dry cycles10.1016/j.cemconres.2009.01.013 ↗
17. ASTM · 2007
18. JSCE · 2008
19. Composite properties of high-strength polyethylene fiber-reinforced cement and cementless composites10.1016/j.compstruct.2015.11.046 ↗
20. Strain hardening fiber reinforced alkali-activated mortar – a feasibility study10.1016/j.conbuildmat.2012.06.007 ↗
21. Ultra-high-ductile behavior of a polyethylene fiber-reinforced alkali-activated slag-based composite10.1016/j.cemconcomp.2016.04.002 ↗
22. Effect of polypropylene fibers on self-healing and dynamic modulus of elasticity recovery of fiber reinforced concrete10.3390/fib6010009 ↗
23. ASTM · 2014
24. Investigation of self-healing behavior of Engineered Cementitious Composites (ECC) materials10.1016/j.conbuildmat.2011.10.051 ↗
25. Water permeability of engineered cementitious composites10.1016/j.cemconcomp.2009.07.002 ↗
26. Self-healing of surface cracks in mortars with expansive additive and crystalline additive10.1016/j.cemconcomp.2012.01.005 ↗
27. A self-healing cementitious composite with mineral admixtures and built-in carbonate10.1016/j.cemconcomp.2018.05.013 ↗
28. Early-age cracking in concrete: causes, consequences, remedial measures, and recommendations10.3390/app8101730 ↗
29. Ultra-high performance concrete and nanotechnology in construction
30. Mine water: hydrology, pollution, remediation
31. Effect of exposure conditions on self healing behavior of strain hardening cementitious composites incorporating various cementitious materials10.1016/j.conbuildmat.2013.01.012 ↗
32. Water permeability and autogenous healing of cracks in concrete
33. Compatibility studies between NASH and CASH gels. Study in the ternary diagram Na2O–CaO–Al2O3–SiO2–H2O10.1016/j.cemconres.2011.05.006 ↗
34. One-part alkali-activated materials: a review10.1016/j.cemconres.2017.10.001 ↗
35. Microstructure development of alkali-activated fly ash cement: a descriptive model10.1016/j.cemconres.2004.08.021 ↗