journal article·2020-01

Material characterisation of thin layer mortared clay masonry

J.A. Thamboo

Publisher page

Abstract

Abstract Although thin layer mortared (TLM) masonry has potential economic benefits over conventional masonry construction, the lack of understanding on material and structural characteristics under various loading situations hamper its widespread usage. Hitherto few systematic research studies were reported on this masonry system. Therefore in order to better understand the material characteristics, an experimental programme was carried out to characterise the TLM clay masonry and its constituents. Tensile bond, shear bond, flexural and compression strengths and deformation characteristics of TLM clay masonry were investigated in this research using clay bricks with proprietary and laboratory made mortars. The results have revealed that the TLM masonry exhibit failure modes different to the conventional masonry: however, where the bond strength commensurate to the conventional mortar, the distinction between the TLM and conventional masonries vanishes. Therefore it is recommended to select appropriate TLM type suitable for the design requirements. Additionally the research generated data of key material properties that might be useful for nonlinear numerical analysis of TLM masonry.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Masonry and Concrete Structural Analysis · Building materials and conservation · Medieval Architecture and Archaeology

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Thin-joint glued brickwork: Building in the British context10.1016/j.conbuildmat.2007.03.008 ↗
2. Prefabricated masonry panel system with two-component polyurethane adhesive10.1002/dama.201500644 ↗
3. Prestress loss due to creep and shrinkage of high-strength calcium silicate element masonry with thin-layer mortar10.1617/s11527-013-0038-0 ↗
4. AS3700 · 2018
5. CSA, Design of masonry structures, CSA S304.1-04 (R2010), Mississauga, Canada, 2010.
6. Masonry Standards Joint Committee (MSJC), Building code requirements for masonry structures, TMS 402/ASCE 5/ACI 530, New York, 2011.
7. BS EN 1996-1-1 · 1996
8. Strength and Elasticity of Thin Joint Hollow Concrete Masonry made with dense or light weight aggregates
9. Prisms strength Built with thin joint polymeric mortar compared to regular mortar joint
10. Prediction of masonry compressive behaviour using a damage mechanics inspired modelling method10.1016/j.conbuildmat.2016.01.048 ↗
11. Behaviour of thin layer mortared concrete masonry under combined shear and compression10.1080/13287982.2015.1116181 ↗
12. Flexural and shear bond characteristics of thin bed concrete masonry10.1016/j.conbuildmat.2013.04.002 ↗
13. Characterisation of thin layer polymer cement mortared concrete masonry bond10.1016/j.conbuildmat.2014.12.098 ↗
14. Masonry elements with damp-proof course membrane: assessment of shear strength parameters10.1016/j.conbuildmat.2012.04.033 ↗
15. Experimental characterization of composite-to-brick masonry shear bond10.1617/s11527-015-0669-4 ↗
16. Bond development in burnt clay and fly ash-lime-gypsum brick masonry10.1061/(ASCE)MT.1943-5533.0002412 ↗
17. In-plane strengthening of clay brick and block masonry walls using textile-reinforced mortar10.1061/(ASCE)CC.1943-5614.0000866 ↗
18. Shear resistance of masonry walls and Eurocode 6: shear versus tensile strength of masonry10.1617/s11527-008-9430-6 ↗
19. Structural behaviour of low- and normal-strength interface mortar of masonry10.1617/s11527-011-9801-2 ↗
20. Three sides supported unreinforced masonry walls under multi-directional loading10.1016/j.conbuildmat.2018.08.144 ↗
21. Experimental characterization and detailed micro-modeling of multi-perforated clay brick masonry structural response10.1617/s11527-016-0888-3 ↗
22. In-plane behavior of clay masonry walls: Experimental testing and finite element modelling10.1061/(ASCE)ST.1943-541X.0000236 ↗
23. Estimation of load reduction factors for clay masonry walls10.1002/eqe.887 ↗
24. On the in-plane shear response of the high bond strength concrete masonry walls10.1617/s11527-017-1078-7 ↗
25. Flexural behaviour of thin joint concrete blockwork: experimental results10.1016/j.conbuildmat.2011.03.059 ↗
26. Influence of sand grading on the characteristics of mortars and soil–cement block masonry10.1016/j.conbuildmat.2007.06.014 ↗
27. Adoption and implementation of Eurocode 6 in Sri Lanka context
28. ASTM C90-16a, Standard Specification for Loadbearing Concrete Masonry Units, ASTM International, West Conshohocken, PA, 2016.
29. ASTM C1314-18, Standard Test Method for Compressive Strength of Masonry Prisms, ASTM International, West Conshohocken, PA, 2018.
30. ASTM C67-17, Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile, ASTM International, West Conshohocken, PA, 2017
31. ASTM C1403-15, Standard Test Method for Rate of Water Absorption of Masonry Mortars, ASTM International, West Conshohocken, PA, 2015.
32. BS EN 1015-10 · 1999
33. BS EN 1015-3 · 1999
34. BS EN 1015-18 · 2002
35. BS EN 1015-11 · 1999
36. ASTM C321-00, Standard Test Method for Bond Strength of Chemical-Resistant Mortars, ASTM International, West Conshohocken, PA, 2012.
37. BS EN 1052-3:2002, Methods of test for masonry. Determination of initial shear strength.
38. BS EN 1052-2:2016, Methods of test for masonry. Determination of flexural strength.
39. Effect of concrete block height variation to the shear bond strength of thin layer mortared masonry10.1504/IJMRI.2018.092461 ↗
40. Bond-strength performance of hydraulic lime and natural cement mortared sandstone masonry10.1016/j.conbuildmat.2015.03.016 ↗
41. Mechanical and bond properties of solid clay brick masonry with different sand grading10.1016/j.conbuildmat.2018.04.042 ↗
42. Analysis of masonry structures: review of and recent trends in homogenisation techniques10.1139/L07-097 ↗
43. Modeling the failure of thin layered mortar joints in masonry10.1016/j.engstruct.2012.12.017 ↗
44. A non-linear interface element model for thin layer high adhesive mortared masonry10.1016/j.compstruc.2014.07.023 ↗
45. Nonlinear finite element modelling of high bond thin-layer mortared concrete masonry10.1504/IJMRI.2016.074727 ↗
46. Relationship between the compressive strength of concrete masonry and the compressive strength of concrete masonry units10.1061/(ASCE)MT.1943-5533.0001204 ↗
47. Mechanics of hollow concrete block masonry prisms under compression: review and prospects10.1016/j.cemconcomp.2006.11.003 ↗
48. BS EN 772-1:2015, Methods of test for masonry units. Determination of compressive strength.
49. BS EN 1052-1:1999, Methods of test for masonry. Determination of compressive strength.