journal article·2020-01

Development of leak-free phase change material aggregates

Sarra Drissi, Tung-Chai Ling, Kim Hung Mo

Publisher page

Abstract

Abstract This study aims to develop leak-free phase change material (PCM)-aggregates through a two-step pelletization process. Microencapsulated PCM (mPCM) was incorporated into the core of the aggregate during the granulation process and then coated with a PCM-free shell to overcome the PCM leakage. The thermal properties of pellets cured under CO2 and natural air, including their enthalpy and thermal conductivity as well as their thermal stability were measured and compared using differential scanning calorimeter, thermogravimetric analyses and transient plane source method. The effect of both mPCM content and CO2 curing on the strength of the aggregates was also analyzed. The results revealed that mPCM can be used to produce lightweight aggregates with a distinct core-shell structure having an oven-dry bulk density, water absorption and latent heat of about 788 kg/m3, 14% and 18 kJ/kg, respectively. In addition, the shell layer can effectively prevent the leakage of the PCM and can be further densified by CO2 curing. In addition, CO2 curing contributed to the improvement of the overall physical properties and early strength development of the aggregates. The developed leak-free PCM-aggregates would then allow adding PCM into the concrete mix as an inert material and hence suppress the degradation of mechanical strength and high-water demand caused by the direct use of mPCM in concrete.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Turning concrete waste powder into carbonated artificial aggregates10.1016/j.conbuildmat.2018.12.021 ↗
2. Carbon nanotube-Cu foam hybrid reinforcements in composite phase change materials with enhanced thermal conductivity10.1016/j.matdes.2019.107709 ↗
3. Form-stable phase change materials with enhanced thermal stability and fire resistance via the incorporation of phosphorus and silicon10.1016/j.matdes.2018.10.020 ↗
4. Thermal conductivity enhancement of phase change materials with form-stable carbon bonded carbon fiber network10.1016/j.matdes.2018.01.052 ↗
5. Bifunctional nanoencapsulated eutectic phase change material core with SiO2/SnO2 nanosphere shell for thermal and electrical energy storage10.1016/j.matdes.2018.05.046 ↗
6. n-Phase micromechanical framework for the conductivity and elastic modulus of particulate composites: Design to microencapsulated phase change materials (MPCMs)-cementitious composites10.1016/j.matdes.2018.02.065 ↗
7. A general method for retrieving thermal deformation properties of microencapsulated phase change materials or other particulate inclusions in cementitious composites10.1016/j.matdes.2017.04.023 ↗
8. Incorporation of microencapsulated dodecanol into wood flour/high-density polyethylene composite as a phase change material for thermal energy storage10.1016/j.matdes.2015.10.068 ↗
9. Assessing the feasibility of integrating form-stable phase change material composites with cementitious composites and prevention of PCM leakage10.1016/j.matlet.2016.12.052 ↗
10. Dakhli Z, Chaffar K, Lafhaj Z. The Effect of Phase Change Materials on the Physical, Thermal and Mechanical Properties of Cement. Sci. 2019;1.10.3390/sci1010027 ↗
11. Experimental and multi-scale analysis of the thermal properties of Portland cement concretes embedded with microencapsulated Phase Change Materials (PCMs)10.1016/j.applthermaleng.2013.11.050 ↗
12. The durability of cementitious composites containing microencapsulated phase change materials10.1016/j.cemconcomp.2017.04.010 ↗
13. Integrating phase change materials in construction materials: critical review10.1016/j.conbuildmat.2019.05.064 ↗
14. Possibilities and benefits of a new method of modifying conventional building materials with phase-change materials (PCMs)10.1016/j.conbuildmat.2019.03.277 ↗
15. Thermal stabilization and permanent deformation resistance of LWA/PCM-modified asphalt road surfaces10.1016/j.conbuildmat.2017.03.050 ↗
16. The use of lightweight aggregate saturated with PCM as a temperature stabilizing material for road surfaces10.1016/j.applthermaleng.2015.02.036 ↗
17. Experimental investigation on paraffin wax integrated with copper foam based heat sinks for electronic components thermal cooling10.1016/j.icheatmasstransfer.2018.08.003 ↗
18. Copper foam/PCMs based heat sinks: an experimental study for electronic cooling systems10.1016/j.ijheatmasstransfer.2018.07.120 ↗
19. Microstructure and thermal properties of a paraffin/expanded graphite phase-change composite for thermal storage10.1016/j.renene.2010.11.028 ↗
20. Thermal conductivity improvement of stearic acid using expanded graphite and carbon fiber for energy storage applications10.1016/j.renene.2006.11.011 ↗
21. Properties of concretes enhanced with phase change materials for building applications10.1016/j.enbuild.2019.07.014 ↗
22. Preparation and thermal characterization of paraffin/metal foam composite phase change material10.1016/j.apenergy.2013.04.050 ↗
23. Experimental and numerical study on melting of phase change materials in metal foams at pore scale10.1016/j.ijheatmasstransfer.2014.01.003 ↗
24. A numerical investigation of heat transfer in phase change materials (PCMs) embedded in porous metals10.1016/j.energy.2011.07.019 ↗
25. Experimental analysis of phase change phenomenon of paraffin waxes embedded in copper foams10.1016/j.ijthermalsci.2014.11.023 ↗
26. Comprehensive parametric study of using carbon foam structures saturated with PCMs in thermal management of electronic systems10.1016/j.enconman.2015.07.071 ↗
27. Thermal efficiency and durability performances of paraffinic phase change materials with enhanced thermal conductivity – A review10.1016/j.tca.2019.01.020 ↗
28. Novel strategies and supporting materials applied to shape-stabilize organic phase change materials for thermal energy storage–a review10.1016/j.apenergy.2018.11.017 ↗
29. Recent developments in the synthesis of microencapsulated and nanoencapsulated phase change materials
30. Potential of macroencapsulated pcm for thermal energy storage in buildings: a comprehensive review10.1016/j.conbuildmat.2019.07.221 ↗
31. Dervilla N, Roger W, Sarah M, Oliver K. Thermal mass behaviour of concrete panels incorporating phase change materials, in: Sustainable Built Environment Conference 2016. Hamburg, Germany.
32. Development of thermal energy storage composites and prevention of PCM leakage10.1016/j.apenergy.2014.08.091 ↗
33. A functional form-stable phase change composite with high efficiency electro-to-thermal energy conversion10.1016/j.apenergy.2016.12.159 ↗
34. A review of microencapsulated and composite phase change materials: alteration of strength and thermal properties of cement-based materials10.1016/j.rser.2019.04.072 ↗
35. Multiphysics analysis of effects of encapsulated phase change materials (PCMs) in cement mortars10.1016/j.cemconres.2019.02.002 ↗
36. Mechanical properties and microscale changes of geopolymer concrete and Portland cement concrete containing micro-encapsulated phase change materials10.1016/j.cemconres.2017.07.012 ↗
37. Preparation and characterization of macrocapsules containing microencapsulated PCMs (phase change materials) for thermal energy storage10.1016/j.energy.2015.08.001 ↗
38. Design, controlled fabrication and characterization of narrow-disperse macrocapsules containing Micro/NanoPCMs10.1016/j.matdes.2016.03.084 ↗
39. A sustainable cold bonded lightweight PCM aggregate production: its effects on concrete properties10.1016/j.conbuildmat.2018.05.269 ↗
40. Joseph · 2010
41. Wang X-c, Tang G-y, Shi H-f. Fabrication and morphological characterization of microencapsulated phase change materials (MicroPCMs) and macrocapsules containing MicroPCMs for thermal energy storage10.1016/j.energy.2011.12.005 ↗
42. Composite macrocapsule of phase change materials/expanded graphite for thermal energy storage10.1016/j.energy.2013.05.007 ↗
43. Preparation, characterization and permeation kinetics description of calcium alginate macro-capsules containing shape-stabilize phase change materials10.1016/j.renene.2011.03.039 ↗
44. Preparation of composite shape-stabilized phase change materials for highway pavements10.1016/j.conbuildmat.2012.12.027 ↗
45. Thermal analysis by DSC of Phase Change Materials, study of the damage effect10.1016/j.jobe.2015.01.001 ↗
46. Influence of Microcapsule Size and Shell Polarity on the Time-Dependent Viscosity of Geopolymer Paste10.1021/acs.iecr.8b01961 ↗
47. Preparation and characterization of expanded perlite/paraffin composite as form-stable phase change material10.1016/j.solener.2014.08.008 ↗
48. Capric–myristic acid/vermiculite composite as form-stable phase change material for thermal energy storage10.1016/j.solener.2008.08.012 ↗
49. Latent heat energy storage characteristics of building composites of bentonite clay and pumice sand with different organic PCMs10.1002/er.3185 ↗
50. Phase change materials of paraffin in h-BN porous scaffolds with enhanced thermal conductivity and form stability10.1016/j.enbuild.2017.11.033 ↗