Contribution of hybrid fibers on the improvement of sand concrete properties: Barley straws treated with hot water and steel fibers
Source abstract
Abstract
Abstract This study is a continuation of previous work undertaken on a sand concrete lightened by barley straws treated with hot water. Indeed, this type of lightweight concrete presented good thermo-physical properties. But on the other hand, its mechanical properties have been slightly reduced. In order to mechanically strengthen the material, it was decided to incorporate steel fibers in the cement matrix. Thus, we have to develop a new lightweight sand concrete based on hybrid fibers: barley straws and steel fibers. The main objective is therefore to improve the mechanical properties of a lightweight sand concrete, without greatly affecting its thermo-physical properties. Since the effect of the barley straws has already been studied in previous works, the present study mainly focuses on the effect of the steel fibers addition. In order to determine the best compromise between the effect of barley straws and that of steel fibers, different percentages of steel fiber (0%; 0.5%; 1%; 1.5% & 2%), as vol. %, have been investigated. The obtained results showed interesting improvements in the physico-mechanical properties of the studied concrete; these findings were confirmed by a microstructural analysis. The optimal proportion of steel fibers that constitutes the best compromise between the studied properties is 1%. In addition, the compressive strength at 90 days has been improved by about 18%, while slight increases in the thermal conductivity and density have been recorded. The thermal diffusivity has been reduced by about 2% and the specific heat has been increased by about 15%. As for the shrinkage, a reduction of about 30% has been noted. It should be noted that, according to the obtained results, the material still retains its qualities of lightweight concrete. Finally, a microstructural study has revealed that the adhesion between the used fibers and the cement matrix is very good.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Innovations in Concrete and Construction Materials · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Drying shrinkage studies of wood sand concrete-effect of different wood treatments10.1016/j.conbuildmat.2012.06.010 ↗
2. Effect of substitution of wood shavings by barley straws on the physico-mechanical properties of lightweight sand concrete10.1016/j.conbuildmat.2014.05.090 ↗
3. Cementitious materials and agricultural wastes as natural fine aggregate replacement in conventional mortar and concrete10.1016/j.jobe.2015.11.011 ↗
4. Experimental characterization of Italian composite adobe bricks reinforced with straw fibers10.1016/j.compstruct.2014.11.060 ↗
5. Characterization and comparison of hygric properties of rape straw concrete and hemp concrete10.1016/j.conbuildmat.2015.11.021 ↗
6. Performance of straw bale wall: a case of study10.1016/j.enbuild.2011.04.001 ↗
7. Houses of straw: Building solid and environmentally conscious foundations
8. Research and solutions: is straw a viable building material for housing in the United Kingdom?10.1089/SUS.2009.9814 ↗
9. Durability of concrete made by partial replacement of fine aggregate by colemanite and barite and cement by ashes of corn stalk, wheat straw and sunflower stalk ashes10.1016/j.conbuildmat.2015.12.102 ↗
10. Study of the thermal performances of an exterior wall of barley straw sand concrete in an arid environment10.1016/j.enbuild.2014.11.034 ↗
11. Improvement of the properties of a sand concrete containing barley straws–treatment of the barley straws10.1016/j.conbuildmat.2016.04.065 ↗
12. Performance of composite soil reinforced with barley straw10.1016/j.cemconcomp.2004.09.013 ↗
13. The influence of natural reinforcement fibres on insulation values of earth plaster for straw bale buildings10.1016/j.matdes.2010.05.026 ↗
14. Properties of hemp fibre reinforced concrete composites10.1016/j.compositesa.2005.01.032 ↗
15. Design of green concrete made of plant-derived aggregates and a pumice–lime binder10.1016/j.cemconcomp.2011.09.002 ↗
16. Fracture energy of natural fibre reinforced concrete10.1016/j.conbuildmat.2012.11.060 ↗
17. Rossi · 2002
18. Effect of steel fibres on mechanical properties of high-strength concrete10.1016/j.matdes.2009.11.025 ↗
19. Braike · 2002
20. Flowability of fibrereinforced concrete and its effect on the mechanical properties of the material10.1016/j.conbuildmat.2010.02.025 ↗
21. Fiber reinforced concrete: state of progress at the edge of the new millennium, design and sustainability of structural concrete in the Middle East with emphasis on high- rise buildings
22. Influence of fibrous waste addition on the shrinkage of mortars
23. Compressive creep and shrinkage of steel fibre reinforced concrete10.1016/0262-5075(89)90100-0 ↗
24. Carlswärd · 2006
25. Combined effect of silica fume and steel fiber on the mechanical properties of high strength concretes10.1016/j.conbuildmat.2007.04.017 ↗
26. P. Rossi. Metallic fiber concretes. Ed. Engineering Techniques. (In French), (1998).
27. Modeling of dimensional variations of a dune sand concrete reinforced by addition of steel fibers10.1080/01694243.2019.1641176 ↗
28. Effect of different fibers on the mechanical properties of concrete containing fly ash10.1016/j.conbuildmat.2006.06.026 ↗
29. Hybrid fiber reinforced self-compacting concrete with a high-volume coarse fly ash10.1016/j.conbuildmat.2005.06.032 ↗
30. Crack growth resistance of hybrid fiber reinforced cement composites10.1016/S0958-9465(01)00043-9 ↗
31. AFNOR, concretes-sand concrete. Project P 18-500, 1995. p. 1.
32. J.J. Chauvin, G. Grimaldi. Sand concretes. Liaison Newsletter Bridge Laboratories (LCPC), 157, 9-15. (In French), (1988).
33. National Press of School of Bridges and Roads. (1994). in: Sand concrete - Characteristics and use practices, Presses of bridges, Paris, France, 236. (In French).
34. Reuse of local sand: effect of limestone filler proportion on the rheological and mechanical properties of different sand concretes10.1016/j.cemconres.2004.07.006 ↗
35. Effect of ternary binder on the mechanical and microstructural properties of sand concrete10.1080/01694243.2015.1099867 ↗
36. Contribution to the development of a sand concrete lightened by the addition of barley straws10.1016/j.conbuildmat.2016.03.067 ↗
37. Physico-chemical and thermal characterization of cellulose from barley straw10.1016/j.polymdegradstab.2004.12.013 ↗
38. Effect of fibre length and fibre content on mechanical properties of short basalt fibre reinforced polymer matrix composites
39. Improvement of mechanical properties of green concrete by treatment of the vegetals fibers10.1016/j.conbuildmat.2013.05.073 ↗
40. Optimisation of lignocellulosic composite formulated with a local resource: the Diss (Ampelodesma mauritanica)
41. Silane treatment of bagasse fiber for reinforcement of cementitious composites10.1016/j.compositesa.2008.05.013 ↗
42. Technical notice. (2018). Steel fiber for concrete « MEDAFAC », Granitex, 54.
43. A.M. Neville, J.J. Brooks. Concrete Technology 2nd Edition. England, (2010).
44. High strength characteristics of cement mortar reinforced with hybrid fibres10.1016/j.conbuildmat.2010.11.008 ↗
45. Metallic fiber reinforced concrete: effect of fiber aspect ratio on the flexural properties
46. Investigation on flexural properties of hybrid fibre reinforced selfcompacting concrete10.1016/j.proeng.2016.08.508 ↗
47. Effects of hybrid fibers on the development of high-volume fly ash cement composite10.1016/j.conbuildmat.2019.04.083 ↗
48. Flexural fatigue performance of metal fibres reinforced mortar
49. Tiles made of concrete reinforced with metal fibers
50. Lightweight panels of steel fiber-reinforced selfcompacting concrete10.1061/(ASCE)0899-1561(2007)19:4(295) ↗
51. P. Rossi. Metal fiber concretes. Presses de L’ENPC. (In French), (1998).
52. Valorisation of metallic fibers from pneumatic waste in construction materials in Saharan areas
53. Ben Yahia · 2001
54. Influence of nature and fiber dosage on the physico-mechanical behavior of sand concretes based on granulated slag fillers
55. Softening response of plain concrete in direct tension
56. High-strength flowable mortar reinforced by steel fiber10.2478/v10189-011-0013-0 ↗
57. Influence of steel fibers on the dimensional and weight variations of cementitious matrices
58. Shrinkage of steel fibre reinforced cement composites10.1007/BF02473051 ↗