journal article·2020-03

Effect of surface preparation on corrosion of steel rebars coated with cement-polymer-composites (CPC) and embedded in concrete

Deepak K. Kamde, Radhakrishna G. Pillai

Publisher page

Abstract

Abstract Nowadays, Cement-Polymer-Composites are widely used to coat steel rebars to delay the initiation of corrosion in reinforced concrete (RC) structures. However, Cement-Polymer-Composite (CPC) coating is sometimes inadequately applied on rusted steel and can lead to premature under film/crevice corrosion. This paper investigates the effect of such inadequate applications of CPC coating and premature corrosion on the service life of RC structures. For this, maximum surface chloride concentrations, diffusion coefficients, and chloride thresholds were determined by a one-year-long laboratory study on the specimens obtained from a 6-year-old bridge and prepared in the laboratory. Studies found that the chloride threshold of inadequately coated steel rebar (i.e., coating on ‘as received’ surface) is significantly lower than that of the adequately coated steel rebars (i.e., coating on ‘sandblasted’ surface). Also, the corrosion initiation time for systems with inadequately coated steel rebar was about 50% less than that of the systems with adequately coated steel rebars. The corrosion mechanisms were justified with micrographs. It is recommended not to use CPC coated steel rebars if adequate surface preparation (say, cleaning/sandblasting) is not implemented.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Corrosion and Durability · Corrosion Behavior and Inhibition · Infrastructure Maintenance and Monitoring

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. EIS study of epoxy resin applied on carbon steel using double-cylinder electrolyte cell10.1016/j.porgcoat.2018.02.002 ↗
2. Corrosion Performance of Epoxy-Coated Reinforcement in Aggressive Environments
3. Defects in epoxy-coated reinforcement and their impact on the service life of a concrete structure A study of critical chloride content and macro-cell corrosion10.1002/suco.201400085 ↗
4. Effectiveness of benzotriazole as corrosion protection material for steel reinforcement in concrete10.1061/(ASCE)MT.1943-5533.0000374 ↗
5. Corrosion behaviour of coated steel rebars in carbonated and chloride-contaminated alkali-activated fly ash mortar10.1016/j.porgcoat.2016.04.040 ↗
6. Cement-modified enamel coating for enhanced corrosion resistance of steel reinforcing bars10.1016/j.cemconcomp.2012.08.009 ↗
7. Effect of prior damage on the performance of cement-based coatings on rebar: Macrocell corrosion studies10.1016/S0958-9465(00)00041-X ↗
8. Corrosion performance of coated reinforcing bars embedded in concrete and exposed to natural marine environment10.1016/j.porgcoat.2006.01.011 ↗
9. International Measures of Prevention, Application, and Economics of Corrosion Technologies Study
10. State-of-the-art review of cathodic protection for reinforced concrete structures10.1680/jmacr.15.00083 ↗
11. An evaluation of the performance of epoxy-coated reinforcing steel in concrete exposure specimens
12. Epoxy coated Final Report
13. Field performance of epoxy-coated reinforcing steel in Virginia bridge decks
14. Performance of coated reinforcing bars in cracked bridge decks10.1061/(ASCE)1084-0702(2005)10:3(255) ↗
15. Influence of barrier pigments on the performance of protective organic coatings10.1016/0033-0655(88)80017-7 ↗
16. Guadagno · R. Soc. Chem. Adv. · 2014 · 15474
17. The study of an energy efficient cool white roof coating based on styrene acrylate copolymer and cement for waterproofing purpose — Part I: optical properties, estimated cooling effect and relevant properties after dirt and accelerated exposures10.1016/j.conbuildmat.2015.08.045 ↗
18. Progress in Organic Coatings Advances in corrosion protection by organic coatings: what we know and what we would like to know10.1016/j.porgcoat.2016.04.030 ↗
19. The study of an energy efficient cool white roof coating based on styrene acrylate copolymer and cement for waterproofing purpose — Part II : Mechanical and water impermeability properties10.1016/j.conbuildmat.2015.08.033 ↗
20. The mechanism of the protection of iron and steel by paint10.1108/eb006930 ↗
21. Studies on the evaluation of the performance of organic coatings used for the prevention of corrosion of steel rebars in concrete structures10.1016/j.porgcoat.2008.08.005 ↗
22. Monitoring the corrosion behavior of coated reinforcement for concrete10.1149/1.2721431 ↗
23. Impact and corrosion resistances of duplex epoxy/enamel coated plates10.1016/j.conbuildmat.2016.02.170 ↗
24. Macrocell corrosion studies of coated rebars10.1007/s13369-014-1006-x ↗
25. Corrosion behavior of epoxy-coated reinforced bars in RC test specimens subjected to pre-exposure loading and wetti10.1016/j.conbuildmat.2016.05.066 ↗
26. Corrosion performance of epoxy-coated reinforcing steel: North American experience10.1016/0950-0618(95)00028-3 ↗
27. Unexpected deterioration of fusion-bonded epoxy-coated rebars embedded in chloride-contaminated concrete environments10.5006/1.3278216 ↗
28. The effect of surface/primer treatments on the performance of alkyd coated steel10.1016/S0010-938X(00)00070-6 ↗
29. Development length of steel reinforcement with corrosion protection cementitious coatings10.1016/j.cemconcomp.2015.04.003 ↗
30. Cementitious coatings for improved corrosion resistance of steel reinforcement10.1016/j.surfcoat.2017.02.036 ↗
31. Influence of anti-corrosive coatings on the bond of steel rebars to repair mortars10.1016/j.engstruct.2011.12.028 ↗
32. Study on polymer modified cement-based coating with healing effect on rusty carbon steel10.1155/2014/628191 ↗
33. Effect of moisture variation on oxygen consumption rate of corroding steel in chloride contaminated concrete10.1016/j.cemconcomp.2010.09.014 ↗
34. A study of the factors affecting the surface chloride maximum phenomenon in submerged concrete samples10.1016/j.cemconcomp.2018.09.006 ↗
35. A time-variant model of surface chloride build-up for improved service life predictions10.1016/j.cemconcomp.2017.08.008 ↗
36. Factors influencing chloride transport in concrete structures exposed to marine environments10.1016/j.cemconcomp.2007.09.005 ↗
37. The importance of chloride content at the concrete surface in assessing the time to corrosion of steel in concrete structures10.1016/j.conbuildmat.2007.12.014 ↗
38. Simulation of chloride migration in reinforced concrete
39. Nuralinah · 2012
40. NT Build 492, Concrete, mortar and cement-based repair materials: Chloride migration coefficient from non-steady-state migration experiments, FINLAND, 1999.
41. ASTM C1556 − 11a, 1556, Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion, Annual Book of ASTM Standards, vol. 4.02, 2015. doi:10.1520/C1556-11A.2.
42. SHRP-S-330, Standard Test Method for Chloride Content in Concrete Using the Specific Ion Probe, (1993) 1–118
43. Probabilistic modeling of service life for structures subjected to chlorides
44. ASTM A775/A775M – 17, Standard Specification for Epoxy-Coated Steel Reinforcing Bars 1, 2017, doi:10.1520/A0775.
45. The steel–concrete interface10.1617/s11527-017-1010-1 ↗
46. A short-term test method to determine the chloride threshold of steel – cementitious systems with corrosion inhibiting admixtures10.1617/s11527-017-1071-1 ↗
47. Statistical distributions for the corrosion rates of conventional and prestressing steel reinforcement embedded in chloride contaminated mortar10.5006/2330 ↗
48. Investigation on the polarization resistance of steel embedded in highly resistive cementitious systems - An attempt and challenges10.1016/j.electacta.2019.03.200 ↗
49. IS:383, Specification for coarse and fine aggregates from natural sources for concrete, Bureau of Indian Standards, 1970.
50. ASTM G109 − 07, Standard Test Method for Determining the Effects of Chemical Admixtures on the Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments, 2013.
51. The influence of the sandblasting as a surface mechanical attrition treatment on the electrochemical behavior of carbon steel in different pH solutions10.1016/j.surfcoat.2018.08.013 ↗
52. The impact of sandblasting as a surface modification method on the corrosion behavior of steels in simulated concrete pore solution10.1016/j.conbuildmat.2017.09.140 ↗
53. On the optimum soil moisture for underground corrosion in different soil types10.1016/j.corsci.2019.108116 ↗