Surface free energy and adhesion energy evaluation of modified bitumen with recycled carbon black (micro-nano) from gases and petrochemical waste
Source abstract
Abstract
Abstract The use of carbon black (CB) obtained from recycling petrochemical waste in bitumen has been reported. In this research, petrochemical waste was recycled and micro-nano CB was produced. Bitumen known as PG64-22 was modified with 3, 5, 7 and 10 wt% of CB and 1, 3, 5 and 7 wt% of nano CB (NCB). NCB particles were evaluated using the scanning electron microscopy and dynamic light scattering test. Stiffness modulus changes of modified bitumen were investigated using the Radovskiy and Teltayev model. Contact angles of three probe liquids, namely water, formamide, and glycerol, were measured on the surface of modified bitumen. The surface free energy parameters like Lifshitz-van der Waals force, polar component and the work of cohesion and adhesion were defined. The results showed that CB and NCB particles increased the penetration index and stiffness modulus of modified bitumen. The total SFE increased more than 50% with 10% CB particles and more than 80% with 7% NCB particles. In addition, the compatibility ratio of limestone and quartzite was revealed to be more than that of granite and sandstone. The results also demonstrated that the wettability of bitumen modified with NCB particles were higher than those modified with CB particles and showed more compatibility ratio values. Moreover, four energy ratios variations of modified bitumen with CB and NCB particles indicated moisture damage performance improvement in the bitumen and aggregate mixes. Also, the results of the indirect tensile strength (ITS) test showed that CB particles in the bitumen led to less reduction of adhesion between bitumen and aggregate compared to the control mixture, leading to an increase in the resistance to moisture damage of asphalt mixture.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (70)
Show source-provided references
1. A review of the use of recycled solid waste materials in asphalt pavements10.1016/j.resconrec.2007.02.002 ↗
2. Use of waste plastic materials for road construction in Ghana
3. Effects of additives on the mechanical performance in recycled mixtures with bitumen emulsion: an overview10.1016/j.conbuildmat.2018.05.174 ↗
4. Effect of waste plastic as modifier on thermal stability and degradation kinetics of bitumen/waste plastics blend10.1016/j.tca.2010.06.013 ↗
5. Modification of thermal and rheological characteristics of bitumen by waste PET/GTR blends10.1016/j.conbuildmat.2016.12.134 ↗
6. Induction heating and healing of carbon black modified asphalt concrete under microwave radiation10.1016/j.conbuildmat.2018.04.002 ↗
7. Carbon black – its nature and possible effects on the characteristics of bituminous road binders
8. Performance evaluation of bitumen modified with pyrolysis carbon black made from waste tyres10.1016/j.conbuildmat.2016.02.143 ↗
9. Assessment of carbon black modified binder in a sustainable asphalt concrete mixture10.1016/j.conbuildmat.2019.03.255 ↗
10. Effects of carbon black on the thermal, mechanical and electrical properties of pitch-matrix composites10.1016/j.carbon.2004.04.005 ↗
11. Physico-chemical analysis of five hard bitumens: identification of chemical species and molecular organization before and after artificial aging10.1016/j.fuel.2010.04.035 ↗
12. Thermal conductivity of polymer composites with close-packed structure of nano and micro fillers10.1016/j.compositesa.2009.02.024 ↗
13. Comparison by Fourier transform infrared (FTIR) spectroscopy of different ageing techniques: application to road bituments10.1016/S0016-2361(00)00121-6 ↗
14. Mechanistic evaluation of modified asphalt paving mixtures10.1139/l94-101 ↗
15. Comparison of carbon black from pyrolyzed tires to other fillers as asphalt rheology modifiers
16. Modification of bitumen with scrap tire pyrolytic carbon black. Comparison with commercial carbon black Part I: mechanical and rheological properties
17. Influence of Carbon Black on the mechanical and electrical properties of asphalt mixtures
18. Thermal properties of asphalt mixtures modified with conductive fillers
19. Performance evaluation of bitumen modified with pyrolysis carbon black made from waste tires10.1016/j.conbuildmat.2016.02.143 ↗
20. Effect of carbon black on the high and low-temperature properties of bitumen
21. Iron oxide nanoparticles for magnetically-triggered healing of bituminous materials10.1016/j.conbuildmat.2016.02.159 ↗
22. Potential applications of nanotechnology in pavement engineering10.1061/(ASCE)0733-947X(2009)135:10(764) ↗
23. Nanomaterials applied in asphalt modification: a review10.1016/j.jmst.2013.04.008 ↗
24. Nanoclay-modified asphalt materials: preparation and characterization10.1016/j.conbuildmat.2010.06.070 ↗
25. Rheological properties and chemical bonding of asphalt modified with nanosilica10.1061/(ASCE)MT.1943-5533.0000690 ↗
26. Evaluation the effect of nano-TiO2 on the rutting and fatigue behavior of asphalt mixtures10.1016/j.conbuildmat.2013.12.064 ↗
27. Physical, rheological, and aging properties of bitumen containing organic expanded vermiculite and nano-zinc oxide
28. Nanoclay-modified asphalt materials preparation and characterization10.1016/j.conbuildmat.2010.06.070 ↗
29. Evaluation of rheological behavior and performance to permanent deformation of nanomodified asphalt mixtures with carbon nanotubes10.1139/cjce-2015-0546 ↗
30. Optimized experimental design for natural clinoptilolite zeolite ball milling to produce nanopowders10.1016/j.powtec.2010.05.034 ↗
31. Investigating fatigue behavior of nanoclay and nano hydrated lime modified bitumen using LAS test
32. Laboratory investigation of moisture damage in rubberized asphalt mixtures containing reclaimed asphalt pavement10.1080/10298430802169432 ↗
33. Moisture damage in asphalt concrete. NCHRP synthesis of highway practice 175
34. Moisture susceptibility of asphalt mixtures. Part 1: Mechanisms
35. Bitumen surface energy characterization using a contact angle approach10.1061/(ASCE)0899-1561(2006)18:6(759) ↗
36. Effects of liquid anti-stripping additives on rheological properties of performance grade binders
37. Assessing asphalt mixture moisture susceptibility through intrinsic adhesion, bitumen stripping and mechanical damage10.1080/14680629.2013.863162 ↗
38. Using energy parameters based on the surface free energy concept to evaluate the moisture susceptibility of hot mix asphalt10.1080/14680629.2014.990049 ↗
39. Jonathan · 2006
40. The testing method of adhesion of asphalt-aggregate
41. Nazimuddin Mohammad · 2007
42. Bitumen surface energy characterization using a contact angle approach10.1061/(ASCE)0899-1561(2006)18:6(759) ↗
43. Characterization of aggregate surface energy using the universal sorption device10.1061/(ASCE)0899-1561(2007)19:8(634) ↗
44. Bhasin · 2009
45. Little · 2006
46. Applying surface free energy method for evaluation of moisture damage in asphalt mixtures containing date seed ash10.1016/j.conbuildmat.2016.08.056 ↗
47. Influence of nano silica and diatomite on the physicochemical and mechanical properties of the binder at unaged and oxidized conditions10.1016/j.conbuildmat.2016.09.140 ↗
48. Investigating effects of using nanomaterial on moisture susceptibility of hot-mix asphalt using mechanical and thermodynamic methods10.1016/j.conbuildmat.2016.11.052 ↗
49. Performance evaluation of carbon black nano-particle reinforced asphalt mixture10.3390/app8071114 ↗
50. Attractive forces at interfaces10.1021/ie50660a008 ↗
51. Estimation of the surface free energy of polymers10.1002/app.1969.070130815 ↗
52. An essay on the cohesion of fluids
53. Investigation of moisture damage resistance of GTR-modified asphalt binder by static contact angle measurements10.1016/j.conbuildmat.2015.07.032 ↗
54. Howson · 2007
55. Duncan · 2005
56. Hefer · 2004
57. Unique effects of hydrated lime filler on the performance-related properties of asphalt cements: physical and chemical interactions revisited10.1061/(ASCE)0899-1561(2005)17:2(207) ↗
58. Matar · 1994
59. Investigating the effect of nanoparticles on the rutting behaviour of hot-mix asphalt
60. Way · 2011
61. A study of moisture damage in plastomeric polymer modified asphalt binder using functionalized AFM tips
62. Ghabchi · 2013
63. Evaluation for warm mix additive-modified asphalt binders using spectroscopy techniques10.1061/(ASCE)MT.1943-5533.0000562 ↗
64. The rheological properties of asphaltic bitumens
65. Radovskiy · 2018
66. Contact angle measurement and contact angle interpretation10.1016/S0001-8686(98)00087-6 ↗
67. Evaluation of dynamic shear rheometer test parameters and effect of carbon black particles obtained from agricultural waste recycling (walnut skin) in the rehabilitation of asphalt binder performance grade
68. Laboratory investigation on the properties of asphalt mixtures modified with double-adding admixtures and sensitivity analysis
69. Mechanical characteristics of tensile strength ratio method compared to other parameters used for moisture susceptibility evaluation of asphalt mixtures
70. Influence of bitumen and aggregate polarity on interfacial adhesion