journal article·2020-06

Enhanced performances of cement and powder silane based waterproof mortar modified by nucleation C-S-H seed

Haoxin Li, Chao Xu, Biqin Dong, Qing Chen, Linan Gu, Xiaojie Yang

Publisher page

Abstract

Abstract Aimed to enhance the performance of the cement and powder silane water repellent based waterproof mortar, different contents of nucleation C-S-H seed were thus introduced into various mortars and pastes, their performances such as strengths, water capillary absorptions, anti-penetration capacities, drying shrinkages and chemical shrinkages were evaluated. The pore size distributions of hardened mortars, heat liberations and crystalline phases of pastes cured for different ages were also measured to explore the mechanisms which are responsible for the enhanced performances. The results indicate that the nucleation C-S-H seed significantly increases the strengths and anti-penetration capacity, reduces the water capillary absorption and drying shrinkage of the waterproof mortar. It slightly affects the chemical shrinkage, but significantly reduces the volumes of the pores, especially the gel and large capillary pores. Overall, it promotes the early hydration of the cement and powder silane paste. It accelerates the conversion of ettringite (AFt) to monosulfoaluminate (AFm) and increases calcium hydroxide (CH) content in the hardened paste cured for 3d. It cuts down the entering time of acceleration period and the contents of un-hydrated clinker phases such as tricalcium silicate (C3S) and dicalcium silicate (C2S). These results will provide a theoretical reference for the preparation of cement and powder silane based waterproof mortar with better performances.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Building materials and conservation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. The influence of water-repellent admixtures on the behaviour and the effectiveness of Portland limestone cement mortars10.1016/j.cemconcomp.2015.02.004 ↗
2. Stearyl methacrylate co-polymers: towards new polymer coatings for mortars protection10.1016/j.apsusc.2019.05.097 ↗
3. Hydraulic lime mortars with siloxane for waterproofing historic masonry10.1016/j.cemconres.2006.11.007 ↗
4. Surface water repellent-mediated change in lime mortar colour and gloss10.1016/j.conbuildmat.2010.04.039 ↗
5. Evaluation of capillary water absorption in rendering mortars made with powdered waterproofing additives10.1016/j.conbuildmat.2009.05.002 ↗
6. Observation and quantification of water penetration into Strain Hardening Cement-based Composites (SHCC) with multiple cracks by means of neutron radiography10.1016/j.nima.2010.04.119 ↗
7. Ageing of lime mortars with admixtures: durability and strength assessment10.1016/j.cemconres.2010.02.013 ↗
8. Effect of hydrophobization treatment on the hydration of repair Roman cement mortars10.1016/j.conbuildmat.2012.05.002 ↗
9. Influence and effectiveness of water-repellent admixtures on pozzolana-lime mortars for restoration application10.1016/j.conbuildmat.2013.08.030 ↗
10. Anon, Chemical admixtures for concrete, Concr. Int. 15 (1993) 48–53.
11. Effect of pulverized fuel ash, ground granulated blast-furnace slag and CO2 curing on performance of magnesium oxysulfate cement10.1016/j.conbuildmat.2019.116990 ↗
12. Mathematical modeling of accelerated carbonation curing of Portland cement paste at early age10.1016/j.cemconres.2019.03.025 ↗
13. Mechanical properties and mechanisms of fiber reinforced fly ash–steel slag based geopolymer mortar10.1016/j.conbuildmat.2018.05.198 ↗
14. Effect of sodium gluconate on dispersion of polycarboxylate superplasticizer with different grafting density in side chain10.1016/j.jiec.2017.06.032 ↗
15. Strength development of solidified dredged sludge containing humic acid with cement, lime and nano-SiO210.1016/j.conbuildmat.2019.116971 ↗
16. Experimental research on magnesium phosphate cements modified by red mud10.1016/j.conbuildmat.2019.117131 ↗
17. The volumetric stability, chloride binding capacity and stability of the Portland cement-GBFS pastes: an approach from the viewpoint of hydration products10.1016/j.conbuildmat.2019.02.026 ↗
18. Effects of adhesives on properties and mechanism of the ultra-thin pavement
19. Utilization of lithium slag by wet-grinding process to improve the early strength of sulphoaluminate cement paste10.1016/j.jclepro.2018.09.027 ↗
20. Activation of blended cements containing fly ash10.1016/S0008-8846(01)00526-9 ↗
21. Strength and microstructural characteristics of chemically activated fly ash-cement systems10.1016/S0008-8846(02)00973-0 ↗
22. Early age strength enhancement of blended cement systems by CaCl2 and diethanol-isopropanolamine10.1016/j.cemconres.2010.01.008 ↗
23. Early age strength increase of fly ash blended cement by a ternary hardening accelerating admixture10.1016/j.cemconres.2015.11.004 ↗
24. Loess stabilization using cement, waste phosphogypsum, fly ash and quicklime for self-compacting rammed earth construction10.1016/j.conbuildmat.2019.117195 ↗
25. Effect of carbonation curing regime on strength and microstructure of Portland cement paste10.1016/j.jcou.2019.05.034 ↗
26. Improvement effect of fiber alignment on resistance to elevated temperature of ultra-high performance concrete10.1016/j.compositesb.2019.107454 ↗
27. Synthesis of nanoSiO2@PCE core-shell nanoparticles and its effect on cement hydration at early age10.1016/j.conbuildmat.2016.03.093 ↗
28. Performance of reinforced concrete beams cast with different percentages of GGBS replacement to cement10.1016/j.acme.2016.11.006 ↗
29. The effects of silica/titania nanocomposite on the mechanical and bactericidal properties of cement mortars10.1016/j.conbuildmat.2017.06.054 ↗
30. Effects of nano-SiO2 on early strength and microstructure of steam-cured high volume fly ash cement system10.1016/j.conbuildmat.2018.10.214 ↗
31. Influence of nucleation seeding on the hydration mechanisms of tricalcium silicate and cement10.1021/jp809811w ↗
32. Leakage behavior of toxic substances of naphthalene sulfonate-formaldehyde condensation from cement based materials10.1016/j.jenvman.2019.109934 ↗
33. Functionalization of renewable bamboo charcoal to improve indoor environment quality in a sustainable way
34. Hydration of tricalcium silicate in the presence of synthetic calcium-silicate-hydrate10.1039/b910216g ↗
35. Influence of nucleation seeding on the hydration kinetics and compressive strength of alkali activated slag paste10.1016/j.cemconres.2011.04.002 ↗
36. Suppression of swelling associated with ettringite formation in lime stabilized sulphate bearing clay soils by partial substitution of lime with ground granulated blastfurnace slag10.1016/S0013-7952(98)00069-6 ↗
37. Role of pH on the structure, composition and morphology of C-S-H–PCE nanocomposites and their effect on early strength development of Portland cement10.1016/j.cemconres.2017.09.002 ↗
38. Utilization of low-quality desulfurized ash from semi-dry flue gas desulfurization by mixing with hemihydrate gypsum10.1016/j.fuel.2019.115783 ↗
39. Effectiveness of a calcium silicate hydrate – polycarboxylate ether (C-S-H–PCE) nanocomposite on early strength development of fly ash cement10.1016/j.conbuildmat.2018.01.053 ↗
40. Reducing environmental impacts and carbon emissions: study of effects of superfine cement particles on blended cement containing high volume mineral admixtures10.1016/j.jclepro.2018.06.079 ↗
41. Development of water-repellent cement mortar using silane enriched with nanomaterials10.1016/j.porgcoat.2018.08.021 ↗
42. Waterproof performance of concrete: a critical review on implemented approaches10.1016/j.conbuildmat.2015.10.048 ↗
43. Alite dissolution and C-S-H precipitation rates during hydration10.1016/j.cemconres.2018.09.001 ↗
44. Effects of synthetic C-S-H/PCE nanocomposites on early cement hydration10.1016/j.conbuildmat.2017.02.075 ↗
45. Recent advances in understanding the role of supplementary cementitious materials in concrete10.1016/j.cemconres.2015.03.018 ↗
46. Nucleation seeding with calcium silicate hydrate – a review10.1016/j.cemconres.2018.07.003 ↗
47. On the action of capillary pressure in fresh concrete10.1016/0008-8846(76)90050-8 ↗
48. How carbonation curing influences calcium leaching of Portland cement paste: mechanism and mathematical modeling10.1111/jace.16684 ↗
49. Investigation on the poor fluidity of electrically conductive cement-graphite paste: experiment and simulation10.1016/j.matdes.2019.107679 ↗
50. Dynamic mechanical analysis of cement mortar prepared with recycled cathode ray tube (CRT) glass as fine aggregate10.1016/j.jclepro.2017.11.057 ↗
51. Influence of freeze-thaw cycles on capillary absorption and chloride penetration into concrete10.1016/j.cemconres.2017.05.018 ↗
52. Magnetic vortex core-shell Fe3O4@C nanorings with enhanced microwave absorption performance10.1016/j.carbon.2019.10.030 ↗
53. Utilization of waste cathode ray tube funnel glass for ultra-high performance concrete10.1016/j.jclepro.2019.119333 ↗
54. Strength enhancement of recycled aggregate pervious concrete using a cement paste redistribution method10.1016/j.cemconres.2019.05.004 ↗
55. L. NICOLEAU, The acceleration of cement hydration by seeding: influence of the cement mineralogy, ZKG Int. (Deutsch-Englische Ausgabe. 1995). (2013). DOI:10.1016/j.enbuild.2012.09.005.10.1016/j.enbuild.2012.09.005 ↗
56. Anodic voltage dependence of Ti-6Al-4V substrates and hydroxyapatite coating10.1166/jnn.2019.16530 ↗
57. Performance and ITZ of pervious concrete modified by vinyl acetate and ethylene copolymer dispersible powder10.1016/j.conbuildmat.2019.117532 ↗
58. Effect and characterization of the nucleation C-S-H seed on the reactivity of granulated blast furnace slag powder10.1016/j.conbuildmat.2019.117726 ↗
59. Effect of aluminum sulfate on the hydration of Portland cement, tricalcium silicate and tricalcium aluminate10.1016/j.conbuildmat.2019.117179 ↗
60. Preparation for micro-lithium slag via wet grinding and its application as accelerator in Portland cement10.1016/j.jclepro.2019.119528 ↗
61. Characteristics analysis of self-luminescent cement-based composite materials with self-cleaning effect10.1016/j.jclepro.2019.03.291 ↗
62. The role of fly ash microsphere in the microstructure and macroscopic properties of high-strength concrete10.1016/j.cemconcomp.2017.07.021 ↗
63. Differences between their influences of TEA and TEA·HCl on the properties of cement paste10.1016/j.conbuildmat.2019.117797 ↗
64. Compressive strength and hydration process of wet-grinded granulated blast-furnace slag activated by sodium sulfate and sodium carbonate10.1016/j.cemconcomp.2019.01.012 ↗