Electrical properties of cement-based materials: Multiscale modeling and quantification of the variability
Source abstract
Abstract
Abstract The electrical properties, resistivity and conductivity, inform on the durability of cement-based materials and can be used for monitoring and inspection of concrete structures. The physical origin of these properties can be linked to the dynamics of the pore solution. We propose a multiscale modeling approach of the electrical conductivity and resistivity informed by the dynamics of ions that enables the quantification of property variability across scales using Monte Carlo Micromechanics (MCM) computations. As a source of variability, we consider the pore solution composition, clinker composition and the uncertainty on solid conductivity. The results are compared to experimental measurements on various cement systems. The age-dependency of ionic diffusion, due to ion-ion and ion-solvent collective effects, is crucial to model the evolution of electrical conductivity. The main results show that Monte Carlo Micromechanics enables the quantification of the variability and uncertainty across scales, since MCM computations have provided estimates of the standard deviation of the electrical conductivity and resistivity at the scales of cement paste, mortar and concrete. Also, the results show that self-consistent scheme provides a good estimate of the effective electrical conductivity of cement-pastes, capturing the transition from a liquid to a solid matrix during cement hydration.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Smart Materials for Construction · Concrete Properties and Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (78)
Show source-provided references
1. Measurement of concrete resistivity for assessment of corrosion severity of steel using wenner technique
2. Test methods for on site measurement of resistivity of concrete10.1007/BF02480599 ↗
3. Study on hydration of Portland cement with fly ash using electrical measurement10.1007/BF02479309 ↗
4. The review of early hydration of cement-based materials by electrical methods10.1016/j.conbuildmat.2017.04.073 ↗
5. Permeability, diffusivity, and microstructural parameters: a critical review10.1016/0008-8846(90)90101-3 ↗
6. Impedance spectroscopy of hydrating cement-based materials: measurement, interpretation, and application10.1111/j.1151-2916.1994.tb04507.x ↗
7. Rigorous link between fluid permeability, electrical conductivity, and relaxation times for transport in porous media10.1063/1.858194 ↗
8. Activation energy of conduction for use in temperature corrections on electrical measurements of concrete10.1520/ACEM20180045 ↗
9. Torquato · 2002
10. Link between the conductivity and elastic moduli of composite materials10.1103/PhysRevLett.71.2927 ↗
11. Relationship between concrete resistivity and corrosion rate – a literature review10.1016/j.cemconcomp.2013.03.019 ↗
12. Thermodynamic modelling of the hydration of Portland cement10.1016/j.cemconres.2005.03.001 ↗
13. The pore solution of blended cements: a review10.1617/s11527-015-0724-1 ↗
14. The pore solution of cement-based materials: structure and dynamics of water and ions from molecular simulations10.1039/C9CP01577A ↗
15. Modelling of the microstructure and transport properties of concrete10.1016/0950-0618(94)00019-0 ↗
16. Hydration of cement with retarder characterized via electrical resistivity measurements and computer simulation10.1016/j.conbuildmat.2013.11.016 ↗
17. K. Van Breugel, Simulation of hydration and formation of structure in hardening cement-based materials (Ph.D. thesis), Delft, 1991.
18. D.P. Bentz, CEMHYD3d: A Three-Dimensional Cement Hydration and Microstructure Development Modeling Package, Tech. Rep. Version 3.0. NISTIR 7232, National Institute of Standards and Technology (NIST), Interagency Report, Technology Administration, U.S. Department of Commerce, NISTIR 7232 (Jun. 2005).10.6028/NIST.IR.7232 ↗
19. A new platform for modelling the hydration of cements10.1016/j.cemconres.2008.12.002 ↗
20. Evolution of pore structure in blended systems10.1016/j.cemconres.2015.02.025 ↗
21. Micromechanics of defects in solids10.1007/978-94-009-3489-4 ↗
22. Random homogenization analysis in linear elasticity based on analytical bounds and estimates10.1016/j.ijsolstr.2010.10.004 ↗
23. Random homogenization analysis for heterogeneous materials with full randomness and correlation in microstructure based on finite element method and Monte-carlo method10.1007/s00466-014-1065-6 ↗
24. Study of electrical resistivity: variability assessment on two concretes: protocol study in laboratory and assessment on site10.1080/19648189.2012.667708 ↗
25. Milton · 2002
26. Concrete: a three phase material10.1016/0008-8846(93)90145-Y ↗
27. A multiscale micromechanics-hydration model for the early-age elastic properties of cement-based materials10.1016/S0008-8846(03)00039-5 ↗
28. Modeling the linear elastic properties of Portland cement paste10.1016/j.cemconres.2005.05.001 ↗
29. Numerical benchmark campaign of COST Action TU1404 – microstructural modelling10.21809/rilemtechlett.2017.44 ↗
30. Modelling elasticity of a hydrating cement paste10.1016/j.cemconres.2007.07.003 ↗
31. Micromechanics analysis of thermal expansion and thermal pressurization of a hardened cement paste10.1016/j.cemconres.2011.01.023 ↗
32. Thermal properties of cement-based materials: Multiscale estimations at early-age10.1016/j.cemconcomp.2018.01.003 ↗
33. Assessment of diffusive and mechanical properties of hardened cement pastes using a multi-coated sphere assemblage model10.1016/j.cemconres.2005.07.007 ↗
34. A variational approach to the theory of the effective magnetic permeability of multiphase materials10.1063/1.1728579 ↗
35. An inverse method to determine the elastic properties of the interphase between the aggregate and the cement paste10.1016/S0008-8846(02)00792-5 ↗
36. Effective properties of n-coated composite spheres assemblage in an ageing linear viscoelastic framework10.1016/j.ijsolstr.2017.04.028 ↗
37. Water-cement ratio gradients in mortars and corresponding effective elastic properties10.1016/S0008-8846(01)00710-4 ↗
38. A multiscale model for effective moduli of concrete incorporating ITZ water-cement ratio gradients, aggregate size distributions, and entrapped voids10.1016/S0008-8846(02)00931-6 ↗
39. Thin interphase/imperfect interface in conduction10.1063/1.1337936 ↗
40. A stochastic homogenization approach to estimate bone elastic properties10.1016/j.crme.2013.12.007 ↗
41. T. Honorio, H. Carasek, O. Cascudo, May self-diffusion of ions computed from molecular dynamics explain the electrical conductivity of pore solutions in cement-based materials?, under review.
42. Dielectric properties of the pore solution in cement-based materials
43. T.C. Powers, Physical properties of cement paste, in: Proceedings of the Fourth International Symposium on Chemistry of Cement, Washington, 1960, pp. 577–613.
44. A model for two types of calcium silicate hydrate in the microstructure of Portland cement pastes10.1016/S0008-8846(00)00257-X ↗
45. T. Honorio, Correlation between the composition variability of Ordinary Portland Cement and the elastic properties of pastes: a Monte Carlo Micromechanics study, Pre-print.
46. Taylor · 1997
47. Molecular modelling of the heat capacity and anisotropic thermal expansion of nanoporous hydroxyapatite
48. Multiscale estimation of ageing viscoelastic properties of cement-based materials: a combined analytical and numerical approach to estimate the behaviour at early age10.1016/j.cemconres.2016.03.010 ↗
49. Densification of C-S-H Measured by 1H NMR Relaxometry10.1021/jp3102964 ↗
50. Densification of C-S-H is mainly driven by available precipitation space, as quantified through an analytical cement hydration model based on NMR data10.1016/j.cemconres.2016.04.006 ↗
51. Multiscale poro-elasticity of densifying calcium-silicate hydrates in cement paste: an experimentally validated continuum micromechanics approach10.1016/j.ijengsci.2019.103196 ↗
52. Bockris · 2000
53. Self-diffusion, velocity cross-correlation, distinct diffusion and resistance coefficients of the ionic liquid [BMIM][Tf2 N] at high pressure10.1039/C5CP04277A ↗
54. Application of the Nernst-Einstein equation to concrete10.1016/S0008-8846(96)00200-1 ↗
55. Effect of speciation on the apparent diffusion coefficient in nonreactive porous systems10.1016/S0008-8846(01)00679-2 ↗
56. Computer simulation of the diffusivity of cement-based materials10.1007/BF01117921 ↗
57. Interpretation of impedance spectroscopy of cement paste via computer modelling10.1007/BF00356331 ↗
58. Estimate the relative electrical conductivity of C-S-H gel from experimental results10.1016/j.conbuildmat.2014.08.036 ↗
59. Statistical variability of mechanical fields in thermo-poro-elasticity: multiscale analytical estimations applied to cement-based materials at early-age10.1016/j.cemconres.2018.05.010 ↗
60. Computer simulation of impedance spectroscopy in two dimensions: application to cement paste10.1111/j.1151-2916.1993.tb03933.x ↗
61. Micromechanics of ITZ-aggregate interaction in concrete Part I: stress concentration10.1111/jace.12591 ↗
62. Hydrate failure in ITZ governs concrete strength: a micro-to-macro validated engineering mechanics model10.1016/j.cemconres.2017.10.002 ↗
63. The crucial effect of early-stage gelation on the mechanical properties of cement hydrates10.1038/ncomms12106 ↗
64. Morphology of cementitious material during early hydration10.1016/j.cemconres.2018.02.004 ↗
65. A study on characteristics of interfacial transition zone in concrete10.1016/j.cemconres.2003.11.019 ↗
66. A review on microstructural characterization of cement-based materials by AC impedance spectroscopy10.1016/j.cemconcomp.2019.03.018 ↗
67. Characterization of physio-chemical processes and hydration kinetics in concretes containing supplementary cementitious materials using electrical property measurements10.1016/j.cemconres.2013.03.008 ↗
68. On reciprocal symmetry10.1016/j.jspi.2007.11.006 ↗
69. Mood · 1974
70. Convergence assessment of numerical Monte Carlo simulations in groundwater hydrology: technical note10.1029/2003WR002876 ↗
71. Upscaling quasi-brittle strength of cement paste and mortar: a multi-scale engineering mechanics model10.1016/j.cemconres.2011.01.010 ↗
72. On estimating the effective diffusive properties of hardened cement pastes10.1007/s11242-007-9170-z ↗
73. E.J. Garboczi, J.G. Berryman, New Effective Medium Theory for the Diffusivity or Conductivity of a Multi-Scale Concrete Microstructure Model—NIST, Concrete Science and Engineering 2.
74. The interfacial transition zone (ITZ) between cement paste and aggregate in concrete10.1023/B:INTS.0000042339.92990.4c ↗
75. Nearest-surface distribution functions for polydispersed particle systems10.1103/PhysRevA.45.5530 ↗
76. Analytical formulas for interfacial transition zone properties10.1016/S1065-7355(97)90016-X ↗
77. Quantitative study of Portland cement hydration by X-ray diffraction/Rietveld analysis and independent methods10.1016/j.cemconres.2004.04.014 ↗
78. The ITZ microstructure, thickness and porosity in blended cementitious composite: effects of curing age, water to binder ratio and aggregate content10.1016/j.compositesb.2013.12.021 ↗