Use of silica particles to improve dispersion of -COOH CNTs/carbon fibers to produce HyFRCC
Source abstract
Abstract
Abstract The development of hybrid fiber reinforced cement composite that has high strength, scope to be used as cement-based sensors has been investigated in this study by using a combination of carbon fibers and carbon nanotubes (CNT) at low volume fraction. The dispersion of CNTs was enhanced by using polycarboxylate based superplasticizer that resulted in a homogeneous aqueous stable solution, and profoundly improved dispersion when integrated with the cementitious matrix. Different siliceous additives were also incorporated into the mixes to improve the dispersion of CNTs in the matrix, where micro-silica outperformed as compared to nano-silica, confirmed morphologically. On the other hand, nano-silica enhanced dispersion of milled carbon fibers in the aqueous state. The sensing behavior was determined by the measurement of bulk resistance of mixes and the samples were subjected to compressive loading to study the strength improvement with the incorporation of fibers. The experimental results reveal that hybrid combination of chopped carbon fibers, micro silica, and low volume fraction of CNTs in a cementitious matrix results in a stronger and durable concrete that holds the potential for sensing applications. Thus, laying a strong foundation for the future of low cost smart cement based materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Smart Materials for Construction · Advanced Energy Technologies and Civil Engineering Innovations · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (88)
Show source-provided references
1. Strength, energy absorption capability and self-sensing properties of multifunctional carbon nanotube reinforced mortars10.1016/j.conbuildmat.2016.05.049 ↗
2. Helical microtubules of graphitic carbon10.1038/354056a0 ↗
3. Mechanical properties of carbon nanotubes10.1007/s003390050999 ↗
4. Nanobeam mechanics: Elasticity, strength, and toughness of nanorods and nanotubes
5. Mechanical properties of carbon nanotubes: Theoretical predictions and experimental measurements10.1016/j.crhy.2003.08.001 ↗
6. Mechanical properties of carbon fibre reinforced cement composites10.1016/0262-5075(86)90021-7 ↗
7. M. Daugevičius, J. Valivonis, A. Beinaravičius, T. Skuturna, M. Budvytis, Experimental investigation of the load carrying capacity of eccentrically loaded reinforced concrete elements strengthened with CFRP, in: Procedia Eng., 2013. doi:10.1016/j.proeng.2013.04.03210.1016/j.proeng.2013.04.032 ↗
8. Specific surface area of carbon nanotubes and bundles of carbon nanotubes10.1016/S0008-6223(00)00155-X ↗
9. Increased solubility, liquid-crystalline phase, and selective functionalization of single-walled carbon nanotube polyelectrolyte dispersions10.1021/nn4011544 ↗
10. Noncovalent functionalization of single-walled carbon nanotubes10.1021/ar900056z ↗
11. Pristine and amino functionalized carbon nanotubes reinforced glass fiber epoxy composites10.1016/j.compositesa.2015.05.012 ↗
12. The role of surfactants in dispersion of carbon nanotubes10.1016/j.cis.2006.11.007 ↗
13. Surface modification and functionalization of carbon nanotube with some organic compounds
14. Sidewall Carboxylic Acid Functionalization of Single-Walled Carbon Nanotubes10.1021/ja037746s ↗
15. Multi-walled carbon nanotubes functionalized with a ultrahigh fraction of carboxyl and hydroxyl groups by ultrasound-assisted oxidation10.1007/s10853-015-9671-z ↗
16. OH and COOH functionalized single walled carbon nanotubes-reinforced alumina ceramic nanocomposites10.1016/j.ceramint.2011.09.002 ↗
17. Carboxylic acid functionalized multi-walled carbon nanotube doped polyaniline for chloroform sensors, Sensors Actuators
18. A review of DNA functionalized/grafted carbon nanotubes and their characterization, Sensors Actuators
19. Ozone treatment of carbon fiber for reinforcing cement10.1016/S0008-6223(98)00115-8 ↗
20. Impact of the molecular architecture of polycarboxylate superplasticizers on the dispersion of multi-walled carbon nanotubes in aqueous phase10.1007/s10853-016-0522-3 ↗
21. Heating and heat-dependent mechanical characteristics of CNT-embedded cementitious composites10.1016/j.compstruct.2015.10.010 ↗
22. Influence of silica fume additions on electromagnetic interference shielding effectiveness of multi-walled carbon nanotube/cement composites10.1016/j.conbuildmat.2011.11.025 ↗
23. Enhanced effect of carbon nanotube on mechanical and electrical properties of cement composites by incorporation of silica fume10.1016/j.compstruct.2013.07.042 ↗
24. Improved piezoresistive sensitivity and stability of CNT/cement mortar composites with low water-binder ratio10.1016/j.compstruct.2014.06.007 ↗
25. H. Liu, S. Cui, J. Wang, J. Wang, Influence of chemical admixtures on the dispersion of carbon nanotubes in water and cement pastes, in: IOP Conf. Ser. Mater. Sci. Eng., 2017. doi:10.1088/1757-899X/182/1/012029.10.1088/1757-899X/182/1/012029 ↗
26. Effect of Surfactant (Triton X-100) Concentration on Dispersion and Functionalization of Multiwall Carbon Nanotubes10.1166/jno.2012.1303 ↗
27. Effects of Various Surfactants on the Dispersion of MWCNTs–OH in Aqueous Solution10.3390/nano7090262 ↗
28. Determining the Surfactant Consistent with Concrete in order to Achieve the Maximum Possible Dispersion of Multiwalled Carbon Nanotubes in Keeping the Plain Concrete Properties10.1155/2016/2864028 ↗
29. Highly dispersed carbon nanotube reinforced cement based materials10.1016/j.cemconres.2010.02.015 ↗
30. Highly-dispersed carbon nanotube-reinforced cement-based materials
31. S. Alrekabi Cundy, A, Lampropoulos, A, Savina, I, Experimental Investigation on the Effect of Ultrasonication on Dispersion and Mechanical Performance of Multi-Wall Carbon Nanotube-Cement Mortar Composites, Studies. 9 (2016) 11
32. Dispersion of Multi-Walled Carbon Nanotubes in Portland Cement Concrete Using Ultra-Sonication and Polycarboxylic Based Superplasticizer10.4028/www.scientific.net/AMM.802.112 ↗
33. Effect of superplasticizer type and siliceous materials on the dispersion of carbon nanotube in cementitious composites10.1016/j.compstruct.2017.11.011 ↗
34. Influence of Nano-SiO 2 Addition on Microstructure and Mechanical Properties of Cement Mortars for Ferrocement10.3141/2141-04 ↗
35. Use of nano-silica in cement based materials—A review10.1080/23311916.2015.1078018 ↗
36. Properties of concrete incorporating nano-silica10.1016/j.conbuildmat.2012.06.044 ↗
37. An investigation on mechanical and physical properties of recycled aggregate concrete (RAC) with and without silica fume10.1016/j.conbuildmat.2014.02.057 ↗
38. B.W. Jo, C.H. Kim, G. ho Tae, J. Bin Park, Characteristics of cement mortar with nano-SiO2 particles, Constr. Build. Mater. 21 (6) (2007) 1351–1355. https://doi.org/10.1016/j.conbuildmat.2005.12.020.10.1016/j.conbuildmat.2005.12.020 ↗
39. Effect of nano-SiO2 and nano-TiO2 addition on the rheological behavior and the hardened properties of cement mortars10.1016/j.msea.2011.10.102 ↗
40. Experimental study of the effect of addition of nano-silica on the behaviour of cement mortars10.1016/j.proeng.2011.04.148 ↗
41. Mechanical properties and durability of high-strength concrete containing macro-polymeric and polypropylene fibers with nano-silica and silica fume10.1016/j.conbuildmat.2016.11.100 ↗
42. Influence of nano-SiO2 addition on properties of hardened cement paste as compared with silica fume10.1016/j.conbuildmat.2005.09.001 ↗
43. Effect of nanosilica on characterization of Portland cement composite10.1016/j.msea.2006.03.010 ↗
44. The influence of nano-silica on the hydration of ordinary Portland cement10.1007/s10853-011-5881-1 ↗
45. Low-drying-shrinkage concrete containing carbon fibers10.1016/1359-8368(95)00020-8 ↗
46. Concrete as a new strain/stress sensor10.1016/1359-8368(95)00002-X ↗
47. Cement reinforced with short carbon fibers: A multifunctional material10.1016/S1359-8368(99)00071-2 ↗
48. Behaviour of carbon fiber reinforced cement composites in direct tension10.1016/0008-8846(93)90013-Y ↗
49. Study on the hole conduction phenomenon in carbon fiber-reinforced concrete
50. Carbon nanotube cement-based transducers for dynamic sensing of strain10.1016/j.cemconcomp.2012.12.013 ↗
51. Health monitoring of structural composites with embedded carbon nanotube coated glass fiber sensors10.1016/j.carbon.2013.08.058 ↗
52. Natural frequencies identification of a reinforced concrete beam using carbon nanotube cement-based sensors10.1016/j.engstruct.2013.12.036 ↗
53. Novel nanocomposite technologies for dynamic monitoring of structures: A comparison between cement-based embeddable and soft elastomeric surface sensors10.1088/0964-1726/23/4/045023 ↗
54. Static and Dynamic Strain Monitoring of Reinforced Concrete Components through Embedded Carbon Nanotube Cement-Based Sensors10.1155/2017/3648403 ↗
55. F. Ubertini, S. Laflamme, A. D’Alessandro, Smart Cement Paste with Carbon Nanotubes, in: Innov. Dev. Adv. Multifunct. Nanocomposites Civ. Struct. Eng., 2016. doi:10.1016/B978-1-78242-326-3.00006-3.10.1016/B978-1-78242-326-3.00006-3 ↗
56. Cement-based sensors with carbon fibers and carbon nanotubes for piezoresistive sensing10.1016/j.cemconcomp.2012.04.007 ↗
57. Effect of CNT and CNF loading and count on the corrosion resistance, conductivity and mechanical properties of nanomodified OPC mortars10.1016/j.conbuildmat.2017.04.112 ↗
58. Fresh and mechanical properties, and strain sensing of nanomodified cement mortars: The effects of MWCNT aspect ratio, density and functionalization10.1016/j.cemconcomp.2017.05.004 ↗
59. In situ-grown carbon nanotubes enhanced cement-based materials with multifunctionality10.1016/j.cemconcomp.2020.103518 ↗
60. Pressure-sensitive properties and microstructure of carbon nanotube reinforced cement composites10.1016/j.cemconcomp.2006.12.011 ↗
61. Potential of carbon nanotube reinforced cement composites as concrete repair material10.1155/2016/1421959 ↗
62. Repair mortars incorporating multiwalled carbon nanotubes: Shrinkage and sodium sulfate attack10.1061/(ASCE)MT.1943-5533.0002105 ↗
63. C150 / C150M–18, Standard Specification for Portland
64. On the aspect ratio effect of multi-walled carbon nanotube reinforcements on the mechanical properties of cementitious nanocomposites10.1016/j.conbuildmat.2012.04.086 ↗
65. ASTM International, C305-06: Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency, Am. Soc. Test. Mater. (2011). doi:10.1520/C0305-13.2.
66. ASTM C143/C143M, Standard Test Method for Slump of Hydraulic-Cement Concrete, Astm C143. (2015) 1–4. doi:10.1520/C0143
67. ASTM C109, Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in . or [ 50-mm ] Cube Specimens) 1, Annu. B. ASTM Stand. (2010). doi:10.1520/C0109.
68. B. Han, X. Yu, J. Ou, Self-Sensing Concrete in Smart Structures, 2014. doi:10.1016/C2013-0-14456-X.10.1016/B978-0-12-800517-0.00001-0 ↗
69. Electrical resistivity of concrete for durability evaluation: a review10.1155/2017/8453095 ↗
70. Polycarboxylate based superplasticizers as dispersant agents for exfoliated graphene nanoplatelets reinforcing cement based materials10.25103/jestr.085.01 ↗
71. Conformation of adsorbed comb copolymer dispersants10.1021/la801410e ↗
72. C.W. Miao, Q. Tian, Q.P. Ran, J.P. Liu, Influence of Polycarboxylate-Based Superplasticizer on the Microstructure of Concrete, in: 1st Int. Conf. Microstruct. Relat. Durab. Cem. Compos., 2008.
73. Controlling the dispersion of multi-wall carbon nanotubes in aqueous surfactant solution10.1016/j.carbon.2006.10.010 ↗
74. S. Alrekabi, A. Cundy, R.L.D. Whitby, A. Lampropoulos, I. Savina, Effect of Undensified Silica Fume on the Dispersion of Carbon Nanotubes within a Cementitious Composite, in: J. Phys. Conf. Ser., 2017. doi:10.1088/1742-6596/829/1/01201110.1088/1742-6596/829/1/012011 ↗
75. Mechanical behavior and microstructure of cement composites incorporating surface-treated multi-walled carbon nanotubes10.1016/j.carbon.2004.12.017 ↗
76. Mechanical properties and durability of high-strength concrete containing macro-polymeric and polypropylene fibers with nano-silica and silica fume10.1016/j.conbuildmat.2016.11.100 ↗
77. Microstructure of cement mortar with nano-particles10.1016/S1359-8368(03)00052-0 ↗
78. Effect of using different types of nano materials on mechanical properties of high strength concrete10.1016/j.conbuildmat.2014.12.075 ↗
79. M.M.B.F. Hamdi, S.H.B. Hamzah, M.H.B.M. Hashim, Structural Performance of Steel Fibre Reinforced Concrete Three-Ribbed Wall Panel on Compression, in: InCIEC 2014, 2015. doi:10.1007/978-981-287-290-6_410.1007/978-981-287-290-6_4 ↗
80. Failure modes characterization of impacted carbon fibre reinforced plastics laminates under compression loading using acoustic emission10.1177/0021998313509504 ↗
81. Electrical properties of cement-based composites with carbon nanotubes, graphene, and graphite nanofibers10.3390/s17051064 ↗
82. Investigations on scalable fabrication procedures for self-sensing carbon nanotube cement-matrix composites for SHM applications10.1016/j.cemconcomp.2015.11.001 ↗
83. Variability Analysis of the Bulk Resistivity Measured Using Concrete Cylinders
84. Factors That Influence Electrical Resistivity Measurements in Cementitious Systems10.3141/2342-11 ↗
85. The piezoresistive behaviors of polyethylene/foliated graphite nanocomposites
86. Influence of carbon black concentration on piezoresistivity for carbon-black-filled silicone rubber composite10.1016/j.carbon.2009.06.050 ↗
87. First-principles density-functional investigation of the effect of water on the field emission of carbon nanotubes10.1088/0957-4484/18/15/155707 ↗
88. X. Yu, E. Kwon, Carbon Nanotube Based Self-sensing Concrete for Pavement Structural Health Monitoring, Research report–Contract Number: US DOT: DTFH61-10-C-00011, Duluth, Minnesota. (2012) http://ntl.bts.gov/lib/45000/45000/45066/3789.pdf. (2012).